Sunbox VHW201KS User manual

12
Ultra HD/4K@60Hz Video Selector
V1.0
VHW201KS
VHW401KS
VHW801KS
USER MANUAL
Package Contents
1 x VHW201KS or VHW401KS or VHW801KS
1 x User manual
1 x Power adapter DC12V with lock
4 x Foot pads
1 x Remote control (VHW201KS Optional)
Overview
The VHW201KS/401KS/801KS (2,4,8 port) HDMI selector is a high performance
HDMI selector equipment. It provides high performance audio and video up to
Ultra HD/4K@60Hz resolution and supports 4 select modes.
Features
Supports resolution up to 4Kx2K@60Hz (4:4:4).
Supports Pixel clock up to 600MHz.
Supports HDR.
HDCP 1.4/2.2 compliant.
Supports 3D pass-through.
Supports RS232 control.
Supports Remote control.
Supports Firmware upgraded.
Specifications
Function VHW201KS VHW401KS VHW801KS
HDMI Output 1
HDMI Input 2 4 8
RS232 control DB9 x 1
IR IN 3.5mm Stereo Jack x 1
LINK LED 2 4 8
SELECT LED 2 4 8
SELECT KEY 2 4 8
Max. Resolution 4Kx2K@60(4:4:4/8bit)/(4:2:0/12bit)
HDCP COMPLIANCE HDCP 1.4 / 2.2
AUDIO SUPPORT LPCM,Dolby TrueHD,
Dolby Digital/Plus/EX,DTS,DTS-HD…
HDMI cable 10m
Power Supply 12V/1A DC
Weigh 305g 462g 702g
Dimensions (LxWxH) 124x83x25mm 152x114x25mm 237x114x25mm

34
FRONT VIEW
1. RS-232 Port
2. IR IN
3. Display LED (Select / Link)
4. Select Key
REAR VIEW
1. POWER JACK 12V DC
2. HDMI OUTPUT
3. HDMI INPUT
MODE Select
There is not connector to any HDMI IN/OUT cable while pressing select key1 and
key2 into mode select.
Mode Features LED Display
1 (default) Manual LED1 Flashes
2 Auto skip All LED Flashes
3 Auto sensing Marquee
4 Port 1 priority LED1 flash, and then after LED2~8 flash
RS232 Console Protocol
Baud Rate: 115200, n parity bit, 8 data bits, 1 stop bit
Ascii Base
Execute Command by '\r' (carriage return)
Command List
-----------------------------------------------------------
Command Description
-----------------------------------------------------------
help : Display help information
reset : Reset the device
info : Display device information
status : Display device status
r : Set the routing status
rs : Display the routing status
save : Save the current settings to Preset
load : Load settings from Preset
edid : Select input EDID mode
default : Reset to factory default settings
For more information, type '/h' or '?' after each commands.
Installation
1. Connect the HDMI cable with the BD player or PC and the <IN> port.
2. Connect the HDMI cable with the UHDTV and the <OUT> ports.
3. Connect the power cord and turn on theAH series .
4. Turn on the BD player or PC and UHDTV.