Sundrax LGC-1-D4LED User manual

User
Manual
Version 1.04
March 11, 2020
LGC-1-D4LED, LGCS-1-D4LED, WLGC-1-DC4LED,
LGB-1-D4LED, WLGB-1-DC4LED
LEDGate Compact

Contents
Specifications
Safe operation
General information
Advantages
Modifications
Installation
Indication
Connection scheme
Technical maintenance
Notes
3
3
3
4
4
4
5
6
7
7
LEDGate Compact 2

Safe operation
To ensure safe and reliable operation of the devices, please observe
the following requirements
Use the device only for its intended purpose
Do not use devices that show signs of malfunctioning
Avoid strong physical impacts on the device
Protect devices and cables from contact with corrosive liquids
Whenever a fault is detected in the device, please contact the manufacturer.
Specifications
Control interface
Transmission range
RF band
LED outputs
Wireless interface
DMX512 interfaces
Connectors
Setup
Power supply
Max current per output
Operating Temperature
IP Rating
Dimensions, mm
DMX512, BeDMX (optional)
100 m (standard antenna)
2.4 GHz
2 or 4
depends on modification
1 or 2
15 EDGV
DIP rotor switchers
12/24 VDC
20 A
-40°С... +70°С
IP 20
86 x 38 x 54 DMX version
110 x 38 x 54 DMX/BeDMX version
General information
Wireless LEDGate Compact is compact LED driver with DMX512 and BeDMX inputs. Powered from
12/24 VDC source, LEDGate is capable to control and dim 2 or 4 output lines for direct connection
with LED equipment: duralight, driverless LED luminaires, etc, with independent short-circuit protection
on each channel. The device is equipped with coaxial RP-SMA RF connector for antenna connection
to work as BeDMX receiver. DMX512 input is also available. Thanks to innovative embedded algorithms,
LEDGate provides a smooth, stepless regulation in full range of intensity.
Warning!
The device uses hazardous
voltage AC 90-250V
LEDGate Compact
3

Installation
Modifications
Before mounting and power up, it is necessary to verify protective earthing and cable connections.
1. Ensure the device has no damage due to transportation.
2. Fix the device on the surface. If you are using wireless modification, connect the antenna.
3. Connect the power cable, input DMX line and LED stripes. If you want connect slave devices,
connect LEDGate Compact Slave to Slave Out connector. If you use Wireless LEDGate Compact
and connect both DMX and BeDMX, priority has DMX. For connection via BeDMX, DMX line should
be disabled.
4. Set device address using DIP rotor switchers. Range of valid addresses starts with 001, (default)
and ends with 509. Starting with this address device will be controlled from an external remote.
LEDGate Compact Slave modification not equipped with DIP rotor switchers, starting address
for LEDGate Compact Slave devices equals the address of the previous device in the chain plus 4.
Advantages
Direct connection with LED equipment
Smooth light regulation
Independent short-circuit protection on each channel
Wireless BeDMX connection (optional)
Chain connection of the LEDGate Slave Compact (optional)
Product code
Name
Outputs
Wireless interface
Address switchers
LGC-1-D2LED
LEDGate
Compact
2
No
Yes
LGC-1-D4LED
LEDGate
Compact
4
No
Yes
LGC-1-DB2LED
Wireless
LEDGate Compact
2
Yes
Yes
LGC-1-DB4LED
Wireless
LEDGate Compact
4
Yes
Yes
LGCS-1-D2LED
LEDGate
Compact Slave
2
No
No
LGCS-1-D4LED
LEDGate
Compact Slave
4
No
No
LEDGate Compact 4

5
4
3
2
1
0
9
8
7
6
5
4
3
2
1
0
9
8
7
6
5
4
3
2
1
0
9
8
7
6
00
1
Pic.1 Default device address (001) (OEM version)
Pic.2 Default device address (001) (Retail version)
Indication
Red
Green
lit
blinks
lit
blins
Address is correct, no DMX data.
Address is not valid.
Address is correct, the data is coming from DMX.
Changed control value DMX.
LEDGate Compact
5

Connection scheme
DMX, BeDMX and Slave connection
Mounting dimensions
DMX
BeDMX
12/24 VDC
INPUT
-
+
+
-
+
-
+
-
+
-
-
0
+
-
0
+SLAVE
OUT
DMX
12/24 VDC
INPUT
-
+
-
0
+
-
0
+
to other
LEDGate
Slave devices
SLAVE
OUT LEDGate
Slave
to additional
LED stripes
Wireless
LEDGate
Compact
SLAVE
IN
80
42
4 holes
4
LEDGate Compact 6

Technical maintenance
Maintenance, search and troubleshooting should be performed by service personnel.
The device should be free from dirt, dents, connecting cables and wires must be intact
and securely fastened.
Notes
Please send all your warranty-related questions to [email protected]
All Sundrax products are covered by a 36 months warranty.
LEDGate Compact
7

Sundrax Electronics
6008, First Central 200
2 Lakeside Drive, Park Royal, London
NW10 7FQ United Kingdom
+ 44 (0) 208 991 33 19
[email protected]
www.sundrax.com