Suneco ECO76360 Series User manual

www.sunecochina.com
Thank you so much for purchasing Suneco products
Please read this manual carefully before attempting to use the
product
ECO7636
LED Street Light
MANUAL

www.sunecochina.com
1. Introduction
ECO76360 series LED street light is an eco-friendly line of new
products from Suneco Green Energy Limited.
Reasonable structure, beautiful appearance, heat and moisture
resisting and with good sealability.
Quick start, high light efficiency, vivid lighting, no flicker, very safe
to operate. There is no harmful effect to the eyes and skin.
Uses single powerful LED as the light source, which is manufactured
using our proprietary LED integrated encapsulation. The light source
can be continuously used for about 50000 hours. This translates to a
product life span of at least 10 years based on normal use.
No pollution ,high stability which achieves the real meaning of
energy-saving.

www.sunecochina.com
1.2 Usage
ECO7636LD series street lights can be used in city streets, residential
areas, factories, pavements, squares, parks, schools，yards and any other
places where lighting is needed.
1.3 The composition and meaning of the model number
ECO XXX XX XXX (X)/XX
Input voltage type (AC- alternating current,DC-
direct current)
The number of light source (Showbyfigure)
Outputpower(Showbyfigure)
Abbreviation for street light
Thedimensionofhousing (Showbyfigure)
Company brandSuneco
2. Structure

www.sunecochina.com
ECO7636 series LED street light consists of the following parts: 1.
Light body 2. Stainless steel lock 3. LED Light source 4. Reflector 5.
Waist-type Glass 6. Power supply 7. Press plate
3. Major Technical Specification
Item
Parameter
Unit
Data
Memo
1
Input Voltage
V
AC90～264
DC12/24
2
Frequency
Hz
50/60
3
Factor
W
80~140
4
Color Temperature
K
2700～7000
5
Color Rendering
Index(Ra)
/
＞75
6
LED
Light
sourc
e
Light Efficiency
Lm/w
>90
Voltage
V
30~35

www.sunecochina.com
Current
A
0.66~1.33
7
IP Rating(IP)
/
IP65
8
Electrical insulation grade
/
CLASSI
9
Max rated environment
temperature
℃
-40℃~55℃
10
Dimension
mm
761×3 50×1 92
11
Light weight
kg
10
4. Use and Installation
1. Tighten the light pole screws and loosen 4screws that fixed the pole，
Connecting the cable line as picture 4.2 shows(with connection mark).
It can work normally with no error, and the detailed steps are as
follows:
2. Open the stainless lock, open the light body
3. Embed the bracket pole into the lamps and tighten the installation
screw, then connect the cables with the power supply in the correct
position:
AC input connection: N L
4. L：Live N：Neutral : Ground
5. DC connection marks: DC+ DC- K
DC+: anode DC-: Cathode

www.sunecochina.com
K:half power control electrode
K+: half power control electrode is anode K-: half power control
electrode is cathode
After installing, please check to make sure that the product can work
properly.
5 、Transport and storage requirements
5.1 The light is packed by carton. Do not expose to moisture and water.
Always handle with care to avoid breaking fragile components.
5.2 The light should be kept in the place that is cool, dry and clean.
6、Open Package and Check
6.1 Check whether the carton of the light is good before open.
6.2 There is one certification, one introduction and one sealing ring
matches to each light. Check whether the part of light is in good
condition.
6.3 Check whether the connector and screw of street light are loose or
not.
7、Caution
7.1 Read the manual carefully before using the light in order to avoid
accidents and consequential damages.
7.2 Pay attention to 4.2 requirement when connect light, prohibit connect
it reverse.

www.sunecochina.com
7.3 The product is designed to be maintenance-free. Under normal
circumstances, servicing is not needed. If the product needs servicing,
please contact us.
7.4 Please check the product carefully before using it. If anything
abnormal happens when in use, please contact us.
7.5 While using the light the surface temperature will rise a little bit. This
is normal.
7.6 Open the connection of reflector and glass is prohibited, it will
damage the waterproof.
8. Warning
8.1 Before installing people should make sure the light is complete.
8.2The protection cover of the light is tempered glass. Do not press or
throw it hard to avoid cracking. If it was cracked, it must be replaced by
another one.
8.3 The light should be kept in the place that is cool, dry and clean. Do
not expose to extreme elements, such as fire and water.
8.4 The power should be turned off when connecting the wire. After
connecting wires, check whether connection is all right or not; prohibit
connect it reverse.
8.5 When the light is working, non-professional worker is prohibited to open the light.
8.6 Do not throw the used lights indiscriminately. Observe proper recycling
procedures.