Sunex Tools SX978 User manual

SX978 1 Rev. 09/30/04
Operating Instructions • Warning Information • Parts Breakdown
SX978
3/8" DR.
HIGH POWER AIR
IMPACT WRENCH
SPECIFICATIONS
Free Speed . . . . . . . . . 12,500 RPM
Max. Torque . . . . . . . . . . 300 ft. lbs.
Working Torque . . . . 90-260 ft. lbs.
Blows Per Minute . . . . . . . . . .1,400
Weight . . . . . . . . . 3.3 Lbs. (1.5 kg)
Length . . . . . . . . . . . 5.7" (145mm)
Sound Level . . . . . . . . . . . . .97 dBA
Air Inlet Thread. . . . . . 1/4"-18NPT
Avg. Air Consumption. . . . . . . 4 cfm
Rec. Air Pressure. . 90 psig (6.2 bar)
Minimum Hose Size . . . . . .3/8" I.D.
ALWAYS READ
INSTRUCTIONS
BEFORE USING
POWER TOOLS
ALWAYS WEAR
SAFETY GOGGLES
WEAR HEARING
PROTECTION
AVOID
PROLONGED
EXPOSURE TO
VIBRATION
Some dust created by power sanding, sawing, grinding,
drilling, and other construction activities contains chemicals
known to cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement
and other masonry products, and
• arsenic and chromium from
chemically-treated lumber.
Your risk from these exposures varies, depending on how
often you do this type of work. To reduce your exposure to
these chemicals: work in a well ventilated area, and work with
approved safety equipment, such as those dust masks that are
specially designed to filter out microscopic particles.

SX978 2 Rev. 09/30/04

SX978 3 Rev. 09/30/04

SX978 4 Rev. 09/30/04

SX978 5 Rev. 09/30/04

SX978 6 Rev. 09/30/04

SX978 7 Rev. 09/30/04

SX978 8 Rev. 09/30/04

SX978 9 Rev. 09/30/04

SX978 10 Rev. 09/30/04