Sungale PF803 User manual

1
QUICK START GUIDE
Model: PF803
2
Buttons and jacks
Getting Started
Connecting your DPF with power by using the power adapter provided. The DPF
will start up and go to main menu.
1. Power: Press to turn on or turn off the DPF player.
2. Play / Pause: Press to enter / confirm; Press to pause when slideshow pictures
and press again to continue slideshow.
3. Navigation button
Thank you for your purchasing of Sungale digital photo frame.
This quick start guide will help you setup and start using the player
as quickly as possible.
5
6
7
123
4
0
Press to move left ( rotate a picture by left 90 when browser mode).
0
Press to move right ( rotate a picture by right 90 when browser mode).
Press to move the cursor to the previous icon or skip to the previous picture.
Press to move the cursor to the next icon or skip to the next picture.
4. Menu: Back to last step.
5. SD/SDHC: Insert one of the SD/SDHC cards each time.
6. USB: Insert a USB flash stick.
7. 5V DC IN: Insert the power adaptor cord to connect the unit with power outlet.

34
Support
3. Contact Sungale Support team
1. Refer to the User's Manual.
2. Visit the support site.
For manual download and FAQs: www.sungale.com
Toll Free Number in the USA: 800-473-5156
Service email: [email protected]
Go to www.sungale.com and click Support, then click Manual download. You will
find user manual with related model number (PF803). Click “Manual Download
-EN” to download the user manual.
Setting
Press LEFT/RIGHT ( / ) button to move cursor to Setting and press
Play/Pause ( ) to enter the setting interface.
There are 2 icons, they are Photo Setup and System Setup respectively.
You may press Up ( ) button or Down ( ) button to select one of the icons,
and press Play/Pause ( ) to enter the detailed setup options (press MENU to
return), then press Up/Down ( / ) to choose what you want to set, and press
Left/Right ( / ) to change the settling. Press MENU to after finish the setting.
What you can setup
You can setup slideshow interval time, transition effect, show type in fit screen or
full screen, browse in thumbnail mode or Browse Mode, play repeat mode, photo
auto play or not, brightness and contrast, TFT saturation, OSD language and
restore all of the settings to factory default setting by selecting Reset Default Setting.
You can also insert a USB flash disk which has pictures to the USB slot to play
pictures stored in the USB.
The digital photo frame will auto slideshow pictures in your card or USB which has
been inserted.
Loading photos from memory card or USB
Insert one of the SD/SDHC card to your digital photo frame by following the
direction showed as below:
SD/SDHC