Sungale AW15S-B User manual

Chapter 5 I CustomerManagement DPF
44
FCC and Safety Information
Contents
Chapter 1 Introduction
Product Introduction
Safely Precautions
Components
Product Map
Chapter 2 Connection
Connecting to apower source
Memory Cards
Connecting to aPC
Chapter 3 Usage
Photos
Music
Background Music
Movies
E-BOOK
Additional Features
Chapter 4 - File Management and Settings
Editing
Settings
Chapter 5 -Customer Service
Frequently Asked Questions
Troubleshooting
Prodcut Specifications
FCC and Safety Information
3
4
6
7
12
15
18
20
23
24
27
40
This product has met all
electronic emission stan
dards. This product may
be used safely in the home.
User Notice
44
16
26
30
33
42
43
FCC Part 15.19
This device complieswith Part 15of the FCCRules .Operation issubject to the
following two conditions:(1) this devicemay not causeharmful interference
and (2) thisdevice must acceptany interference received,including interference
that may cause undesired operation .
FCC part 15.21
Warning: Changes or modifications to this unit not expressly approved by the
party responsible forcompliance could voidthe user s authority tooperate
the equipment.
FCC part 15.105
Note : This equipment has been tested and found to comply with the limits for a
Class B digitaldevice ,pursuant toPart 15 ofthe FCC Rules,These limits are
designed to provide reasonable protection against harmful interference in a
residential installation .Thisequipment generates, uses,and can radiateradio
frequency energy
and ,if notinstalled and usedin accordance withthe instructions, maycause
harmful interference willnot occur ina particular installation.If this equipment
does cause harmfulinterference to
radio or television reception ,which can be determined by turning the equipment
off and on ,the user is encouraged to correct the interference by one or more of
the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipmentinto an outleton circuit different form that to which
the receive is connected.
Consult the dealer or an experienced radio TV technician for help.

Chapter 5 I CustomerManagement DPF
43
Product Specifications
Item Details
LCD Display Size 14 Inch (Diagonal)
Resolution 1280(Horizontal)*800(Vertical)
Brightness 350cd /m
Contrast Ratio 400:1
Memory Internal Memory 512MB
Compatible Memory Cards CF / SD/ MMC / Memory Stick /XD
Remote Control 28Keys
Support Media Formats Images JPEG(jpg)/BMP(24bit)
Video AVI, MPEG-1(mpg/dat), MPEG-4,
Audio Mp3,WMA
Internal Speaker Stereo 3W+3W
Power Adapter Input: 100 240V AC,Output: 12V, 3ADC
Electricity Consumption 16W(Operating)
Size Width*Height*Depth 420(w)*350(h)*55(d)[mm]
Weight Kg 3.2
USB Connection USBOTG, USB HOST USB 2.0
Product Specifications
Specifications can bechanged without priornotice in the interest of improving product
performance.
Chapter 1
Introduction
3
4
4
5
6
6
7
7
9
Product Introduction
Precautions
Electrical Safety
Handling
Components
Basic Components
Player Overview
Digital Frame
Remote Control

The Bluetooth Digital Photo Frame is a convenient image album that keeps your
favorite images atyour fingertips.
With its bright and vivid LCD screen, this Bluetooth Digital Photo Frame offers
an alternative to photo printing, adding a new level of convenience to your life.
With its diverse file management functions, this Bluetooth Digital Photo Frame
allows you to relive your cherished memories anytime.
Product Introduction
3
Chapter 1 I introduction DPF
Chapter 5 I CustomerManagement DPF
42
Troubleshooting
Consult the troubleshootingguide below ifyou are experiencing any problems
with the unit. Aminor adjustment mayeliminate the problem.
No Power Press and hold the power button
Esnure the power cord is not damaged
Ensure the power plug is connected firmly
to a working outlet.
Cannot read WMAmusic: This unit only supportsWMA withbith
rate: 32Kbps - 192kbps
Cannot read card. 1. Please copythe content ofyour card to
your PC, then format yourcard. Repaste
the photos/music/movies onto your card,
and then reinsert the cardinto your DPF.
2. Ensure the card is not damaged.
3. Ensure the card is correctly and firmly
connected to the DPF.
4. Ensure the card hascontent (photos,
music, or movies). If there is no content
on the card, the screen will display "Files
can't be found"
Remote control not working 1. Ensure the batteries are inserted
2. Ensure the batteries' protective plastic
tab is pulled out.

Chapter 5 I CustomerManagement DPF
41
Question and Answer
4
Chapter 1 I introduction DPF
Safety Precautions
Power Related
WARNING: indicates information that, if neglected, could result in serious
injury and/or death to the user.
CAUTION: indicates informationthat, if neglected,could result injuryto the
user and/or material damage.
01. Use only the power supply
included with your frame. Failure
to do so may result in product
malfunction.
02. When connecting to your power
source, make sure that your hands
and feet are free of moisture. Failure
to do so could result in electrical shock.
05. Do not overload power strips. 06. Disconnect the power supply
during inclemental weather
conditions including lightning
storms. Failure to do so may result
in fire.
03. Make sure the power supply is
firmly plugged in. A loose power
cord could result in shock, or fire.
04. Do not let the power cord get
tangled, and do not place heavy
objects on the cord. Putting stress
to the cord creates a fire hazard
and the possibility of electric shock.
Please read thefollowing guidelines carefully to ensure user safety.
No. The PCmust have a USB2.0 or higher,and the PC musthave
Windows 2000 orabove.
Can I adjust thecolors of the display?
Why can't myPC find theinternal
memory?
Why won't the unitplay pictures?
What MPEG-4 formatsare supported
by the multimedia DigitalPhoto
Frame?
Why won't the frame play my music?
Why doesn't thephoto cover the
entire screen?
Can the DPFconnect withALL
computers?
You canadjust the picture display in the video settings inthe set upmenu by
changin the brightness andcontrast settings. Thiswill not alter thecontents
of your picture files.
Turn on theDPF and wait for the function menu to appear, then connectthe
USB cable from theunit to PC. Ifthe "Found New Hardware"prompt fails to
appear, lookin "My Computer"for a USBmass storage device.
1. Ensure thepictures are stored in the card or USB drive,and that you
have the correctsource selected.
2. Make sure allyour image files areJPEG, JPG or BMPformat.
3. If picturesstill do not play, try reformatting your card or internalmemory.
The player can supportmost AVI, DIVX andXVID video files.
The player can onlyplay MP3 and WMAaudio files (bit rate32kbps- 192kbps).
The resolution requiredfor a picture to cover the entire screen mustbe
greater than or equalto 1280x800 pixels (RGB).

5
Chapter 1 I introduction DPF
Safety Precautions
Product Related
01. Dropping the product or subje
cting it to a significant impact can
cause critical damage.
06. Make sure to power off the
unit before disconnecting the
power supply.
02. Spilling water or any other
liquid on the product can cause
critical damage.
04. When cleaning the LCD screen,
turn off the power and wipe it gently
with a soft cloth.
05. Do not subject the product to
severe humidyt and/or heat.
Please adhere tothe following guidelines to ensure user safety,
and avoid productmalfunction.
03. Striking or scratching the LCD
screen may cause permanent dam
age to the screen.
Question and Answer
Chapter 5 I CustomerManagement DPF
40
1. There maybe only one picturein the memory.
2. Youmay be viewinga high resolution image which take longer to load.
3. Youare in Displaymode.
4. The nextpicture is acorrupted file.
This section willattempt to troubleshoot common problemsthat one may
experience with the Multimedia DPF. If this guide does not solve your
problems, do notdismantle the machienyourself.
Q&A
What photo, music, andvideo formats
are supported bythis Multimedia
Digital Photo Frame?
What memory cardsare compatible
with this frame?
How do Iobtain the right music
format?
Does this Framehave built-in m
emory?
Can I insert multiplememory cards?
Does this frameplay all AVI video
files?
What is thebest picture resolution
displayed on thescreen?
Why won't theplayer show my
document files?
Can I rotatea picture?
Why won't myframe advance to the
next picture?
Yes, theplayer has 512MB of internal memory to store yourfiles. Do not
rename the memoryfolder in your PC.
Yes, youcan insert a CFcard and a SD,MMC, MS, MS Proor XD card into
the other slotat the same time.
No, but the devicewill work withAVI filestaken with most digitalcameras.
The frame's bestresolution for images is1280x800(RGB).
The frame canonly play TXTfiles written in English or Chinese.
Yes. Usethe ROTATE button to rotate a picture.
Note: the rotatedpicture will return to its original orientation upon
powering off theunit. Use photo-editingsoftware to permanently
adjust your pictures.

Chapter 5
Customer Management
40
Question & Answer
Troubleshooting
Product Specifications
FCC and Safety Information
42
43
44
6
Chapter 1 I introduction DPF
Basic Components
These components are provided with your product purchase.
Because Sungale is constantly working to improve its products, basic
components may be modified without prior notice and may differ in
appearance with the images below.
Components

Chapter 1 I introduction DPF
7
Player Overview
Your frame may differ slightly in appearance with the images provided.
Digital Frame
1. POWER: Turns the player off and on.
2. MS/SD/MMS/MS Pro/XD CARD SLOT: Insert supported memory cardtypes
here.
3. CF CARD SLOT: Insert CF card here.
4. USB HOSTCABLE: Connect USB OTG to enable use of the USB HOST.
5. USB OTG: This port allows USB connection between Frame and PC.
6. RIN: Right audio input
7: LIN: Left audio input.
8. AV: Video input
9. DCIN: Insert the DC power adaptor to your Digital Photo Frame.
10. USB HOST: Connect the BluetoothDongle/ USB removablestorage device
/MP3/PMP/Mobile hard diskto your DigitalPhoto Frame. (Before doing this,
be sure toconnect the attachedUSB HOST CABLE to the USB OTG.
6789
10
1
2
3
4
5
Chapter 4 I Settings DPF
38
Settings
Select VERSION in the Settings menu to see your player's Version number.
Press EXIT to exit the Settings menu.

Chapter 1 I introduction DPF
8
Your Frame may differ slightly with the images below.
Rear View
Player Overview - Frame
12. Wall mount
13. Speaker: Builtin stereo speakers.
Chapter 4 I Settings DPF
37
Settings
Video Setup
Select VIDEO SET in the Settings menu and press “right” to access the
submenu:
You can set the Lightness/Contrast/Color levels 0-16.
A. Press "left"/"right" to set and press ENTER Toconfirm.
B. Press "left" to return to the higher menu.
Default Set
This function restoresthe factory default settings as follows:

Chapter 1 I introduction DPF
9
Your remote control may differ slightly inappearance with the images
provided.
Remote Control
Note: Remove Red Tab to activate battery.
Power:
Mute:
Photo:
Music:
Movie:
Text:
AV IN
Press POWER to turn the player on and off.
Press MUTE to toggle sound on and off.
Press PHOTO to start a slideshow.
Press MUSIC to play songs.
Press MOVIE to play movies.
Press TEXT to open text files.
Press AV IN to switch to AV input mode.
Player Overview - Remote Control
Chapter 4 I Settings DPF
36
Settings
Startup setting
Select STARTUP SET in the Settingsmenu, and press"left" to
access the submenu:
Press the navigationkeys
to change theDPF's startup
mode. Doing thisconfigures
your Frame tostart in Picture,
Music, or Moviemode.
For example, ifyou want musicto play uponpowering up your DPF,
use the arrowkeys to select MUSIC and press ENTER to confirm.

Chapter 4 I Settings DPF
35
Settings
2. Select pictureplay mode in the SETTINGS menu, and press to
display the [Picture play mode] submenu:
Chapter 1 I introduction DPF
10
Player Overview
Press ROTATE to rotate thepicture. (Note: this does not permanently
change the picture's orientation)
Press ZOOM repeatedly to zoomin/out on yourpictures.
Press VIEW to view 9 pictures at a time in thumbnail size. Use the up/down
/left/right buttons to select the picture andpress enter toconfirm.
Press OSD to display thestate of the file beingplayed. In editmode, use
OSD to execute copy/paste/delete functions(see page 30).
Press MENU to return to the main menu.
Press BACK MUSIC to play a picture slideshow with background music.
Press SLIDE SHOW to display a continuous cycle of all images in the internal
memory.
Press STEP SHOW to display a single picture. Press it again toadvance to
the next image.
Press DPF to switch to the DPF interface.
Press COLOUR to switch between soft/nature/bright/user styleset up.
Press EXIT to stop the current action and return to the previous menu.
Press to PLAY or PAUSE a file.
Press SETUP to set the language/picture/version settings.
Press to STOP picture playback and return to the file list.
Press PREV to skip to the previoustitle/chapter/track/picture.
Press NEXT to skip to the nexttitle/chapter/track/picture.
Press the VOLUME buttons to adjust the players volume for MP3 and movie
playback.
ROTATE:
ZOOM:
VIEW:
OSD:
Menu:
BACK MUSIC:
SLIDE SHOW:
STEP SHOW:
DPF:
COLOUR:
EXIT:
PLAY/PAUSE:
SETUP:
STOP:
PREV:
NEXT:
VOL +/-:

Chapter 2
Connection
12
13
14
15
Power Connection
Connect to USBPort
Memory Card Insertion
Memory Card Extraction
PC Connecting 16
Chapter 4 I Settings DPF
34
Settings
Picture Settings
Select PICTURE SET in the Settings Menu, and press"right" right to
access the submenu:
Press "up" or"down" to select
slideshow mode orpicture play
mode.
1. Select Slide show mode in the SETTINGS menu and press"right" to
access the submenu:
Press "up" or"down" to choose
between 5sec, 10sec,30sec,
60sec, or 1hour.
Press ENTER to confirm or press "left"to return to the higher menu.

Connection
Power Connection
1. Connect the power adaptor to the DC 12Vin Jack on the left side of the frame.
2. Plug thepower cable into a wall outlet.
3. The player will power on automatically.
Chapter 2 I Connection DPF
12 Chapter 4 I Settings DPF
33
Settings
Settings
Use the navigationbuttons on the remote control to select the SETTINGS
icon and press ENTER.
Use "up" or"down" to choose which
setting you wishto change.
Language Settings
Select LANGUAGE SETin the SETTINGS menu, and press "right" to
display a submenu.
Use "up" or"down" to change your
selection
This DPF supports Chinese/English OSDsettings.
A. Press ENTER to confirm.
B. Press "left" to return to the higher menu.

Connection
Connect to USB HOST
USB HOST: Insert one of the listed USB removable storage devices or the
Bluetooth Dongle tothe USB HOST jack. Do not force the device
in; check tomake sure theorientation of thedevice is correct.
Chapter 2 I Connection DPF
13
Note: Before connecting theUSB removable storagedevice or Bluetooth
Dongle to theDPF,make sure toattach the USBHOST CABLE to
the USB OTGport.
Editting Files
Chapter 4 I Settings DPF
32
B. Delete Files
From the fileview screen use"up" or "down"to locate thefile you wantto
delete and press the RIGHT arrow key. Press OSD:
Select DELETE from the list of options and pressENTER. Upon a
successful delete youwill receive a"Finished!" message asfollows:
C. EXIT
When you wish to leave the EDIT interface, press EXIT to return to the main
menu.

Connection
Inserting Your Memory Card
Refer to the picture below to make sure that the memory card is correctly
aligned with the frame. The rule of thumb is that the sticker side of the
memory card shouldface the front.
Incorrect alignment of the memory card upon insertion may cause damage
to the unit and/or the card.
Chapter 2 I Connection DPF
14
Chapter 4 I Settings DPF
31
Editing Files
Using the arrowkeys, select COPY/PASTE and press ENTER To start
stransferring the file. If you are succesfful the screen will display as
follows:

Removing Your Memory Card
Grip the cardfirmly between two fingers, and pull the card straight out without
bending it. Refer to the image below:
Chapter 2 I Connection DPF
15
Connection
Note: With no memory card present, the product will display images stored in
the Frame's internal memory. Press MENU to return to the main menu.
Chapter 4 I Settings DPF
30
Editing Files
Editing Files
From the mainmenu, use thearrow buttons to
select the FILE icon in the main menu. Press
ENTER to enter the card selection screen.
Select the desiredmemory card and press
ENTER to enterthe file list.
A. Copy andPaste a File
Use "up" or "down" to locate and highlight the
file you wishto copy. Press RIGHT to select
the file.
Press EXIT to re-enter the card selectionscreen
then select INTERNAL MEMORY. Press the
OSD button andENTER to display the conte

Chapter 4
Editting & Settings
30
30
Editing
Copy file
Delete file
Settings
Language set
Picture set
Start up set
Video set
Default set
Version
32
33
33
34
36
37
37
38
PC Connecting
Connecting your DPF to your PC
Use the supplied USB cable to connect your DPF to your PC.
Note: Before connecting to your PC, first unplug the attached USB HOST CABLE from
the USB OTG jack.
1. After connecting your DPF to the PC, your PC should display a window similar to the
one shown below.
2. Choose "Open folder to view files..." and click "OK". Your PC will display the
contents of your memory.
3. With your DPF files on display, you may copy documents and move them to your
PC, delete items from your DPF's memory, or paste files on your PC into your DPF's
memory. Right click the desired items to find these options.
4. When you are finished managing your files, click the "Safely Remove Hardware"
icon on your toolbar and confirm the operation.
5. When your PC says you may remove your hardware, unplug the USB cable from
your PC, and resume use of your DPF.
Chapter 2 I Connection DPF
16

Chapter 3
Usage
20
18
23
26
Photos
Music
Background Music
Movies
E- Book
Additional Functions
24
27
Chapter 4 I Settings DPF
28
Additional Functions
BACKGROUND MUSIC
Press the BACK MUSIC button to begina slideshow with music in
the background.
Note: Music must bein MP3 or WMA format.
SETUP
In the MainMenu use the navigation buttons on the remote
control to selectthe SETTINGS icon and pressENTER.
Setup: Refer to page 33-38 for instructions on changing your
settings.
Setup Initialize: Returns settings to default.
Internal Memory: Perfors a quick format check.
AV IN
Press AV IN to switch the player to AV input mode. Your DPF will
now receive it'saudio/video signal through its AV IN jacks.
COLOUR
Press COLOUR to select acolor setting from the following
options: bright, soft,user, nature.

Photos
Chapter 3 I Usage DPF
18
Viewing a Photo in Full Screen
Accessing Your Photo Directory
Press PHOTO then ENTER to enter the device selection
screen.
Use your directional buttons to select the
desired device and press ENTER to enter
the file display screen.
Press "right" orENTER to enter your file list. Press "up"
or "down" toselect a picture, and press ENTER to view it.
Selecting a Device
Press MENU atany time toreturn to theMAIN MENU.
Addtional Functions
Chapter 3 I Usage DPF
27
During photo playback,pressing ZOOM repeatedly will magnify
the image inthe following cycle:
Zoom
SLIDE SHOW
Press the SLIDE SHOW button.
Your Frame will automatically create a slideshow of the images
on your internalmemory.
STEP SHOW
Press the STEP SHOW button during aslide show. The slide
show will pause,displaying the image currently on the screen.
Each press willadvance your slide show one picture.

Photo
Rotating a Photo
After selecting the desired photo,press ROTATE to
rotate the photo clockwise.
Chapter 3 I Usage DPF
19
Chapter 3 I Usage DPF
26
E- Book
Note: This Frame isonly compatible withTXT formatted text.
Select the E-BOOKicon from themain menu andpress ENTER to
activate the deviceselection screen. Usethe directional buttons
to select the device you have stored your TXT documents in.
Press ENTER andthen press "right"to enter thefile list. Youwill
arrive at the following screen:
Use "up" and"down" to selecta document. PressENTER to
view the selecteddocument.
While viewing yourdocument:
1. Press "left"to go to the previous page.
2. Press "right"to advance to the next page.
3. Press "up"to go to the line above.
4. Press "down"to advance to the next line.