Sunjoy L-OF117PST-A User manual

Heirloom Slate Fireplace with Cover
Item# L-OF117PST-A
Congratulations on your purchase of our SUNJOY Heirloom Slate Fireplace with Cover. Our
clear, easy to follow, step-by-step instructions will guide you through the assembly process
from start to finish.
WARNING:
Keep all children and pets away from assembly area. Children and pets should be supervised
when they are in the area of the Fireplace construction.
Keep assembly area at least 6ft/1.8m from any obstruction such as a fence, garage, house,
overhanging branches, laundry line or electrical wires.
Some parts may contain sharp edges. When assembling and using this product, basic safety
precautions should always be followed to reduce the risk of personal injury and damage to the
product. Please read all instructions before assembly and use.
Check all bolts for tightness before use, and periodically check and tighten bolts as necessary.
Assemble on level ground.
For outdoor use only.
IMPORTANT
Please take time to read these instructions thoroughly and follow each step carefully for safe
and easy operation. Keep this manual for future reference.
For technical assistance on assembly or replacement parts, call Sunjoy Industries at
1-866-578-6569 from 8:30AM to 5:30PM EST, or email us at [email protected], or visit
www.sunjoydirect.com for assistance.

No. Description Qty
A Chimney Top 1
B Chimney 1
C Upper Base 1
D Side Mesh 2
E Rear Board 1
F Post 4
G Door 1
H Slice 1
I Door Holder 1
J Fire Bowl 1
K Base 1
L Poker 1
N Cover 1
AA Bolt M6x15 26
BB Flat Washer M6 26
CC Nut M6 1
DD Wrench M6 1
Step 1:
Put Upper Base (C) upside down and
attach the four Posts (F) on it as shown
above. Then lock them by Bolt (AA), Flat
Washer (BB) and Wrench (DD). Do not lock
tightly.
Step 2:
Set Rear Board (E), Side Mesh (D) and Door
(G) between the four Posts (F). Then fix
them by Bolt (AA), Flat Washer (BB) and
Wrench (DD). Do not lock tightly.
Please follow the direction of the arrow label
when installing the Door (G).
Parts List

Step 3:
Put the assembled part on Base (K), then fix
Base (K) with Post (F) by Bolt (AA), Flat
Washer (BB) and Wrench (DD). Lock all the
bolts tightly.
Step 4:
Attach Door Holder (I) to Door (G) by through
Door (G), and Slice (H), then fix it by Nut (CC)
as shown above.
Step 5:
Attach Chimney Top (A) with Chimney (B) as
shown above. Lock them tightly by Bolt (AA), Flat
Washer (BB) and Wrench (DD) from the inside of
Chimney (B). Then turn the Chimney Top (A)
upward after assembly completed.
Step 6:
Put Chimney (B) on Upper Base (C). Open
the door and put Fire Bowl (J) in Base (K).
Put Poker (L) and Cover (N) nearby.

Care & Maintenance
Before using, clean the fireplace completely with a soft dry towel. When not in use, wipe free of any dirt
or loose objects, wash with a mild solution of soap and water; rinse thoroughly and dry completely.
Do not use strong detergent or abrasive cleaners. When not in use, recommend the use of patio
furniture covers.
Steel components of garden accessories and furniture are treated with rust inhibiting paint. However,
due to the nature of steel, surface oxidation (rusting) will occur if this protective coating is scratched.
To minimize this condition, it is recommended that care be taken when assembling and handling the
product, in order to prevent the paint from being scratched.
Like all topical coatings, cleaning should be with a non-abrasive neutral pH cleaner, you may call the
toll free number 877-738-7325 to obtain it from V-SEAL Sealers.
Limited Warranty
Sunjoy Industries warrants to the original purchaser that this item is free from defects in workmanship
and materials for a period of 1 year from the date of purchase, provided the item was factory-sealed at
the time of purchase and is maintained with care and used only for personal, residential purposes.
Should any manufacturing defect arise within this warranty period, Sunjoy Industries will repair or
replace (at our option) any defective merchandise upon proof of purchase; however, transportation and
delivery costs, as well as payments to a third party for assembly or disassembly of the item, remain the
responsibility of the purchaser. A purchaser of an "open box," previously-returned, or "clearance" item,
as well as original purchasers outside of the warranty period, may obtain replacement parts from
Sunjoy Industries for products in current production, at nominal cost.
Exclusions
Items used for commercial, contract, or other non-residential purposes, or items damaged due to acts
of nature, vandalism, misuse, or improper assembly are not covered. Corrosion or rusting of hardware
is not covered. Proof of purchase (dated register receipt) is required for warranty claims. Warranty is
to the original purchaser and is non-transferable. Any replacement of warranted items will be in the
original style and color, or a similar style and color if the original is unavailable or has been
discontinued. As some states do not allow exclusions or limitations on an implied warranty, the above
exclusions and limitations may not apply. This warranty gives you specific rights, and you may also
have other rights, which vary from state to state.