Sunnydaze Decor SSS-492 User manual

MZ13153BA Page 1 / 204/2022
1. Attach the pump to the built-in tubing inside fountain topper.
2. Fill the base with enough water to keep the pump fully submerged during operation,
approximately 3.5 cups.
3. Plug the power cord into a properly grounded GFCI outlet.
NOTE:

CERAMIC OWL
INDOOR TABLETOP WATER FOUNTAIN

Read all assembly and care instructions carefully before using this product. Save this manual for future reference.

 
Fountain 1
Electric Submersible Pump 1
Ensure all parts are
accounted for before
disposing of packaging.
NOTE: The water tubing is built into the fountain. Take care when handling the water tube; detaching the
water tube from the fountain will damage the fountain and automatically void the product warranty.
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
[e-mail], or via our contact us page at https://tiny.cc/SunnydazeContact
ASSEMBLY
Very quiet, minimal water sounds

04/2022 Page 2 / 2
WARNING!
             



• If water is not flowing within several moments of the fountain being plugged in, ensure that the pump is fully submerged
underwater. Add water to the reservoir if necessary. The pump may have air bubbles in the filter, which can prevent
water from circulating properly and can also cause excess pump noise. Unplug the power supply for a few moments
and plug it back in.
• Check the flow control on the body of the pump, as it may need to be adjusted to achieve the desired water flow rate.
• Inspect the pump and tubing for obstructions.
• Pump noise can be caused by trapped air, low water level, or the pump being too close to the walls of the fountain.
While the pump is fully submerged, try gently tapping the pump with your finger to help release the trapped air. Also,
check if adding water or moving the pump helps to reduce noise.
• Check to make sure the power outlet is working; consult a certified electrician if in doubt about electrical connections.
• For indoor use only.
• Keep fountain out of reach of children and pets.
• Keep the power cord away from all heat sources. Do not use electrical cords in areas with high temperatures.
• Check the water level frequently to ensure the pump remains fully submerged; never allow the pump to run dry as it
will burn out the motor.
• Only use water in this fountain. Distilled water will help prevent mineral buildup but is not required. Avoid heavily
chlorinated water as it may damage the fountain or pump.
• Periodically change the water to reduce scale and buildup — clean components regularly for optimal performance and
appearance. DO NOT use harmful additives such as bleach, chlorine, etc. OR abrasive materials to clean the fountain
or pump.
• Always unplug the fountain before cleaning and/or maintaining the fountain and the recirculating pump.
• Take care when handling the pump; only pick it up by the body of the pump, never by the power cord.
• Although this fountain was designed for indoor use, there is potential for splashing or slow leaks. Test the fountain on
a water-safe surface. Always protect surfaces that can be damaged by water.
Care & Maintenance
IMPORTANT SAFETY INFORMATION
• For indoor use only.
• Keep fountain out of reach of children and pets.
• Fountains may splash or leak; always protect surfaces that can be damaged by water.
• Prevent water loss or damage to electrical sockets by ensuring the power cord has a drip loop; a diagram
of a drip loop is shown on the right.
• Make sure the power cord is away from traffic areas.
• Keep power cord away from all heat sources. Do not use electrical cords in areas with high temperatures.
• Check the water level frequently to ensure the pump remains fully submerged; never allow the pump to
run dry as it will burn out the motor.
• Always unplug the power supply before cleaning and maintaining the fountain and the recirculating pump.
• Take care when handling the pump; only pick it up by the body of the pump, never by the power cord.
Drip Loop
Drawing is for visual reference only,
cord placement and plug type
vary by fountain style.
Troubleshooting
If you experience issues with assembly, pump operation, or the product was damaged during shipping,
please contact our customer service team through one of the methods mentioned at the top of page 1.
Please have the item number and order information ready to expedite response time.
MZ13153BA