Sunrich Tech C-160 User manual

Nov/04 MNCB8169S001
1
10/100/1000 Gigabit Ethernet
CardBusAdapter
User Manual
Ver. 1.00
All brand names and trademarks are properties of their
Respectiveowners.

Nov/04 MNCB8169S001
2
Overview
This CardBus Ethernet PC Card supports 10Mbps, 100Mbps and
1000Mbps and automatic speed detection and connection. With its
32-bit high speed bus, the card provides high bandwidth networking
capability to notebook PCs.
General Features
zRealtek RTL8169SBL chipset
zAuto-Negotiation with Next Page capability
zCrossover Detection & Auto-Correction
zWake-on-LAN and remote wake-up support
zSupport Full Duplex flow control(IEEE 802.3X)
zFully compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
zSupports IEEE 802.1P Layer 2 Priority Encoding
zSupports IEEE 802.1Q VLAN tagging
System Requirements
zWindows® 98SE, Me, 2000, XP
z64MB of RAM
zAvailable Type II CardBus Slot
zCD-ROM Drive (for driver installation)

Nov/04 MNCB8169S001
3
Package Contents
zOne CardBus Ethernet PC Card
zOne Driver CD
Hardware Setup And Driver Installation
Before installing the PCMCIA 10/100/1000 Ethernet Adapter,
understand the usage of the connectors on the CardBus Card.
LED Status
LED Indicators Color State Indication
On Connection at 1000MbpsF Red
Flash Sending/Receiving Data
On Connection at 100MbpsL Green
Flash Sending/Receiving Data

Nov/04 MNCB8169S001
4
Windows® 98SE/ME/2000/XP Driver Installation
Note: Please take notice of the installation order. First, run the
InstallShield Wizard, and then plug in the PCMCIA Ethernet
Adapter to the CardBus Slot.
1. Power on your computer and boot to Windows.
2. Insert the Driver CD into the CD-ROM Drive, and then please
browse CD and locate the Driver Folder “\Cardbus\Gigabit
LAN” and double click the InstallShield driver setup program
“Setup.exe” to start the application installation procedure, and
follow the on-screen instructions to complete the installation.