SUNWAYTEK H510 User manual

WIRELESS CONTROLLER H510
USER MANUAL
Please visit sunwaytek.com for specifications and support.

Quick Start
Pair*
Link
Disconnect
Operation
WIRELESS WIRED
Press and hold for 2 sec
Plug in via USB
Unplug
Press and hold for 1 sec
Option 1 - Force Sleep: press and hold Home button for 5 sec.
Option 2 - Auto Sleep: leave the controller without operation in 5 min.
Option 3 - Passive Sleep: Disconnect from the connected device side.
For Android, Steam, Stadia, if connect as Switch Pro Controller, please refer to Switch profile.
Fire devices may support all the 4 types of profiles depending on the pair method.
ABXY caps are removable for reposition as Switch or Xbox layout.
1Including Linux and Raspberry Pi.
2Starting with iOS 13, iPadOS 13, tvOS 13, and macOS Catalina.
3Currently unavailable for TV.
4Switch Pro Controller mode only.
Platform Compatibility Keymapping Profiles
21 3
4
USB Type C
Motion Control
Wireless
Wired
home home
capture
select
start
+
-
Y
YX
X
B
BA
A
Xbox button
back
start
Y
X
B
A
Xbox button
view
menu
Y
X
B
A
Pair & Link
Pair refers to the first time sync with the device.
If wirelessly paired with another device thereafter,
the stored info of the 1st device will be erased,
new pairing has to be done when back to the 1st
device.
Link refers to the reconnection to an ever paired
device, whose device info has been stored in the
controller automatically.
Pair methods listed here are the typical to each platform.
Read the following guides for more options.
Fire devices may support all the 4 pairing methods.
Charge the battery
Charge via type C USB cable on DC power supplies (output Voltage 5V, current ≥ 250mA),
including but not limited to:
• AC adapter
• Switch dock
• USB port of computer
• others with USB electricity output, like power bank, etc.
The controller supports playing during charging. The 4 LED lights stay lit once full charged.
WARNING: Battery Safety
Do not connect to high voltage outlets.
Use only approved charger and cord.
Periodical charging is necessary when unused for long.
Remove the battery if they are worn out and dispose of properly.

Connect to Switch
OK
Controllers
Controllers
Change Grip/Order
1 2 3 4
Press when you are ready.
Operate by Joy-con, touch, or a paired controller. Ignore the instruction on the last screen.
From the HOME screen, select “Controllers”, then “Chang Grip/Order”, enter pairing screen, stay here.
Press and hold + until lights run.
Once succeed, certain light(s) stays lit.
When the console is on (in any screen), just
press to link.
Enable wired communication in Settings.
Connect.
System Settings
Controllers and Sensors
Pro Controller Wired Communication On
Wired Connection
Up to 8 controllers can be paired at the same time to a
Nintendo Switch system.

Connect to PC
Option 3: USB (Xbox 360 Controller)
Controller Settings
Detected Controllers:
Xbox 360 Controller
Control Panel > Hardware and Sound > Devices and Printers
Devices
Xbox 360
Controller for
Windows
>
Devices
Turn on Bluetooth, add the device “GamepadX”.
Option 1: Bluetooth (Xinput)
Work as Bluetooth XINPUT device in Windows, and
Xbox One Controller in Steam.
Control Panel > Hardware and Sound > Devices and Printers
Devices
GamepadX
>
Controller Settings
Detected Controllers:
Xbox One Controller
Press and hold + until lights run.
Settings
Bluetooth & other devices
Bluetooth & other devices
Add Bluetooth or other device
Bluetooth
On Add a device
Bluetooth
Add a device
GamepadX
Press and hold + until lights run.
Devices
Turn on Bluetooth, add the device “Pro Controller”.
Option 2: Bluetooth (Switch Pro Controller)
Work as Nintendo Switch Pro Controller in Steam.
Support motion control.
Controller Settings
Detected Controllers:
Nintendo Switch Pro Controller
Settings
Bluetooth & other devices
Bluetooth & other devices
Add Bluetooth or other device
Bluetooth
On Add a device
Bluetooth
Add a device
Pro Controller

Connect to Android
Turn on Bluetooth, click “Pair new device”. Press and hold + until lights run. Find the device “Gamepad” to pair.
Bluetooth
On
Pair new device
Paired devices
+
Bluetooth
On
Paired devices
Connected
Gamepad
Pair new device
Gamepad
Available devices
Just press to link to the device ever paired
(ensure Bluetooth is on).
Once succeed, light stays on.
Pair new device
Pro Controller
Available devices
Option 1: Android Gamepad
Option 2: Switch Pro Controller
Pairing method for Switch (see Connect to Switch) also applies to Android.
The controller will be paired as Switch Pro Controller, work in supported games.
Connect to Linux
Option 1 also applies to Linux or Raspberry Pi, as
long as the device has Bluetooth enabled.

Connect to iOS
Connect to Fire TV
Just press to link to with the device ever paired
(ensure Bluetooth is on).
Press and hold + until lights run. Turn on Bluetooth, connect the device “Xbox Wireless
Controller”.
< Settings
Bluetooth
Xbox Wireless Controller
OTHER DEVICES
Bluetooth
Amazon Fire OS devices support NIntendo Switch Pro controller, Xbox 360 Controller, Xbox One Controller and Android Gamepad,
so all the previously introduced 4 pairing methods may be applicable.
Ver. 1.04
Contents in this documents may change without notice.
The names of actual companies and products mentioned herein maybe the
trademarks of their respective owners.
© 2020 Sunwaytek Limited. All rights reserved.
INFO:
This pairing mode will pair the controller as Xbox One
Controller. Same applies to other Apple devices like iPad,
Mac and Apple TV, and Google Stadia.