Turn on Bluetooth, click “Pair new device”. Press and hold + until lights run.
Once succeed, light stays on. Press only, to connect with the device has
ever been paired (ensure Bluetooth is on).
Connect to Android
Find the device “Gamepad” to pair.
Bluetooth
On
Pair new device
Paired devices
+
Bluetooth
On
Paired devices
Connected
Gamepad
Pair new device
Gamepad
Available devices
Pair new device
Pro Controller
Available devices
OK
Controllers
Controllers
Change Grip/Order
1 2 3 4
Press when you are ready.
Pairing only need to be done once. Thereafter,
just press Home button to connect ,
unless the controller was paired with another
devices via Bluetooth, in which case pairing
need to done again.
Operate by Joy-con, touch, or a paired controller. Ignore the instruction on the last screen.
From the HOME screen, select “Controllers”, then “Chang Grip/Order”, enter pairing screen, stay here.
Press and hold + until lights run.
When the console is on (in any screen), press
and hold until lights run.
Connect to Switch
Enable wired communication in Settings.
Connect.
System Settings
Controllers and Sensors
Pro Controller Wired Communication On
Once succeed, certain light(s) stays lit.
Up to eight wireless controllers can be paired
to a Nintendo Switch system.
Note
Pairing method for Switch
also applies to Android. The
controller will be paired as
Switch Pro Controller, work in
supported games.
Wired Connection
