
10
Rescue parachute assembly
Thanks for reading carefully ! We recommend the initial rescue
parachute assembly and installation is made by a qualied person.
Connecting the handle to the rescue parachute’s deployment bag
A
B
C
D
A :
B :
A
B
C
D
DELIGHT rescue para-
chute handle
Parachute folded ac-
cording to manufacturers
specication and in de-
ployment bag.
Parachute rigging lines
Parachute risers (Y-risers
or standard risers)
1. Place the handle inside
the middle webbing loop and
make a lark’s head knot with
the handle.
2. Fasten tightly the lark’s
head knot and verify the so-
lidity of the link.
A : Y-Risers : make a lark’s
head and connect the risers
to the harness using Maillon
Rapide ® Inox 6 or 7 mm (x2)
see page 12
B : Standard Risers : use one
Maillon Rapide ® Inox 7 mm.
See page 13
Rescue parachute pocket characteristics
•4 aps back pocket.
•Cable locking.
•Handle on the right-hand side.
•Volume: 3 to 6,5 litres.
•Compatible with the SUPAIR light and X-tralite res-
cue parachutes and other solo rescue parachutes.