Super Amart BISBEE 53849 User manual

ASSEMBLY INSTRUCTION
BISBEE 1800 DINING TABLE CODE - 53849
Imported by Super Amart Pty Ltd, Qld, Brisbane Australia.
for any assistance with assembly or for missing parts please phone
Super Amart Ewing road, Customer Service Freecall 1800 351 084
770mm
Imported by Super Amart Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone
Super Amart Ewing Road, Customer Service Free call 1800 351 084
1 53849

BEFORE YOU START :
1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may
damage the product.
2. Take care when lifting. Product should be assembled as near as possible to
the point of use.
3. Ensure that you have all required contents for complete assembly.
4. Always read the assembly instructions carefully before beginning assembly.
5. Keep all hardware parts and packaging out of reach of small children.
6. Do not over tighten the screws and bolts as this may damage the threads.
PRE-ASSEMBLY PREPARATION
ALLOW 15 MINUTES 2 PEOPLE REQUIRED
X 2
A. BOLT
M8 X 60MM :12PCS
B. WASHER
1.2MM X Ø8/Ø20 :12PCS
C. SPRING WASHER
1.2MM X Ø8 :12PCS
D. ALLEN KEY
M4 : 1PC
1 TABLE TOP
2TABLE LEGS (LEFT)
1PC
TABLE LEGS (RIGHT)
3 2PCS
2PCS
2 53849

Attach Table legs(left) (2) and Table legs(right)(3) to table top (1) With bolts (A) and washers
(B),(C) using Allen Key (D)
B
C
AD
ASSEMBLY IS COMPLETE
3 53849
WITH 2 PEOPLE CAREFULLY TURN OVER

Congratulations! You have just purchased a quality product from
Super Amart, Australia’s largest discount furniture retail store. Please
read on for important information regarding your purchase…
A multi-step finish is applied to all our furniture, but all wood comes from nature.
Because of this, there will be natural variations in surface texture and grain like
knots, mineral streaks and sap runs that may affect the finish.
These differences in character are not defects, but distinctions that make each
piece of furniture unique.
Our furniture is built to last. Following these steps for basic care should protect
your investment for years to come.
Dust frequently with a clean damp lint-free cloth. This will help remove
abrasive build up which can damage a finish over time.
Do not place hot objects on any furniture surface. Always use a hot plate or
placemat. Laminate and lacquer finishes on table tops provide added scratch
and heat resistance to our furniture, but they can still be damaged without
proper care.
Avoid exposing your furniture to strong sunlight, heat outlet, open windows or
dampness. Prolonged exposure to direct sunlight can fade the finish of your
furniture, while extreme temperature and humidity changes can cause
cracking or splitting.
Do not expose your furniture to any liquids. Never allow water to sit on your
furniture. Alcohol, nail polish and perfume are also dangerous as they will
dissolve the lacquer finish on contact and may require professional repairs.
Do not allow plastic to come in direct contact with your furniture. Chemicals in
the plastic of placemats etc may soften and mark the finish if left in contact
with the furniture for a period of time.
care and maintenance
4