Super Amart TORELLI 1600 User manual

Imported by Super Amart Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone
Super Amart Ewing Road, Customer Service Free call 1800 351 084
ASSEMBLY INSTRUCTION
TORELLI 1600 DINING TABLE
ITEM CODE 48723
Imported by Super Amart Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone
Super Amart Ewing Road, Customer Service Free call 1800 351 084
1ITEM CODE 48723
760mm

PRE-ASSEMBLY PREPARATION
Before you start:
1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may
damage the product
2. Take care when lifting. Product should be assembled as near as possible to
the point of use
3. Ensure that you have all required contents for complete assembly
4. Always read the assembly instructions carefully before beginning assembly.
5. Keep all hardware parts and packaging out of reach of small children.
6. Do not over tighten the screws and bolts as this may damage the threads
2 ITEM CODE 48723
ALLOW 20 MINITES 2 PEOPLE REQUIRED

3 ITEM CODE 48723
PARTS LIST
1 TABLE TOP X1
2 TABLE SHELF X1
3 TABLE LEG X4
4 CONNECTION ROUND TUBE X4
A.ROD M8X125mm
4PCS
B.CAP Ø43mm
4PCS
C.FLAT WASHER Ø20mm
4PCS
D.FLAT WASHER M8
4PCS
E.HEX CAP NUT M8
4PCS
F.SPANNER
1PC
G.ROD M10X730mm
4PCS
H.FLAT WASHER M10
4PCS
I.SPRING WASHER M10
4PCS
J.SCREW NUT M10
4PCS
K.FOOT Ø76mm
4PCS
L.SPANNER
1PC

STEP 1: Screw rod to table top .Do not fasten it.Then
put connection round tube and cap on it.
STEP 2:Assemble table shelf to table top (after Step
1)with flat washer / and hex cap nut by using
spanner .
4 ITEM CODE 48723

5ITEM CODE 48723
STEP 3: Screw rod to table.Do not fasten it.
STEP 4: Assemble table leg to table with flat washer
/spring washer and screw nut by using spanner .

6
STEP 5: Put the foot on table leg.Then using two people
and carefully turn table upright.
ASSEMBLY IS COMPLETE
ITEM CODE 48723

7ITEM CODE 48723
CARE AND MAINTENANCE
If the glass is chipped or broken,stop using the product and
consult the place of purchase.
WARNING:
Do not place very hot or cold items on the glass surfaces unless
adequately thick table mats are used to prevent such items from
coming in contact with the glass.
Do not sit or stand upon the glass surfaces.
Do not use the glass as a chopping surface.
Do not strike the glass with hard or pointed items.
When cleaning the glass panels use a damp cloth or leather with
washing up liquid or soft soap if necessary,do not use washing
powders or any other substances containing abrasives since
these substances scratch glass.