Supera SMX10-1 User manual

SMX10-1, SMX20-1, SMX20-2, SMX30-1
MIXERS
INSTRUCTION MANUAL
This manual contains important information regarding your Supera® unit. Please read this manual thoroughly prior to equipment set-up, operation and mainte-
nance. Failure to comply with regular maintenance guidelines outlined in this manual may void the warranty.

MAIN EXTERNAL PARTS MIXER
1. Gear change hand lever
2. Stirring shaft
3. Mixer
4. Stainless barrel
5. Power switch
6. Bent lever
7. Safety guard (may choose the fitting)
8. Support
TECHNICAL PARAMETERS
DESCRIPTION
This is a type of changing speed gear mixer, with its planetary stirring design. It has
a compact structure, is highly efficient and power saving, and is easy to operate. It
will be provided to you as an ideal assistant for bread and cake making.
INSTRUCTION
MANUAL
©SUPERA V.1.0 | October 2014

INSTRUCTION
MANUAL
©SUPERA V.1.0 | October 2014
INSTALLATION
Ensure the location of the Planetary Mixer is capable of supporting its weight.
ASSEMBLY
WARNING: The Planetary Mixer is very heavy, care must be taken when moving it.
WARNING: The bowl must be attached and raised into position prior to starting
the Planetary Mixer.
We accept no responsibility for any injury caused by incorrect assembly of this appliance.
Note: Ensure the feet are level to reduce vibration during operation.
Remove the appliance from all packaging.
Fitting/Removing the Bowl
1. Turn Off the appliance.
2. Open the safety guard by turning it to the
left (SMX10-1, SMX20-1, & SMX20-2) or
lifting it above the mixer (SMX30-1).
3. Lower the bowl with the bowl handle.
4. Release the locking catches either side of the
bowl.
5. Lift the bowl. The bowl is held in place by two
pins securing the handles to the cradle and a
hole at the back of the appliance which houses
the lug on the bowl lip.
6. Reverse the procedure to fit the bowl.
Note: Ensure the handle is fully pushed back
and the bowl is completely raised or the
mixer will not work.
Changing the Mixer Attachment
1. Turn Off the appliance.
2. Open the safety guard by turning it to the left (SMX10-1, SMX20-1, & SMX20-2) or lifting it
above the mixer (SMX30-1).
3. Lower the bowl with the bowl handle.
4. Push the mixer attachment up and to the left to release it.
5. Insert the desired attachment. Push up and to the right to lock it into place.
6. Raise the bowl.
Note: Regularly grease the bowl lift mechanism to ensure smooth operation.

OPERATION INSTRUCTION
1. Standard power supply v/ HzAc. Plug in the unit into the proper outlet.
2. Set your unit to desired speed.
3. Install desired attachment. (Beater, Dough Hook, or Wire Whip)
4. Place bowl in proper place and check to make sure it is secure.
5. Raise the hand lever so that it in the highest position.
ACCESSORIES AND FUNCTIONS
1. Whisk: Light mixes, whipped cream, mayonnaise, egg whites,
pancakes and souffles. Recommended Speed: 1, 2, 3, Fast
2. Beater: Firm mixes, light pastry, cake/biscuit mix, icings, fillings, and
mashed vegetables. Recommended Speed: 1, 2, Medium
3. Spiral Dough Hook: Heavy mixes, dough, pie pastry, etc.
Recommended Speed: 1, Slow
NOTES
1. The power socket must be connected to a ground wire to guarantee optimal
operation. There is a strong risk of malfunction or shock if the mixer is not
grounded. The ground wire can never be connected to a gas pipe, water pipe,
lightning rod, or telephone line. After installation, have an electrician check for
electric leakage. If the power line is ever damaged, please consult a
professional electrician.
2. Don’t put your hand into the stirring barrel during operation. Power supply
should be disconnected before the mixer is going to be installed.
3. Don’t operate the mixer beyond the time limit. Doing so will reduce the life
of the unit.
4. The mixer should be mounted on a stable and clean place. Keep it away from
overheated or over-wet places and away from equipment which has strong
electromagnetic pull or can produce a strong electromagnetic pull.
©SUPERA V.1.0 | October 2014
INSTRUCTION
MANUAL
6.Once the hand lever is raised, close the Safety Guard completely. If Safety Guard
is not closed the mixer will not function.
7.To turn the unit on, press the GREEN power button.
8.To turn the unit off, press the RED power button.
To change the desired speed, press the RED power button to turn the unit
off. Move the hand lever into the lowest position. Select new desired speed.
Raise hand lever back into highest position. Press GREEN power button to
turn the unit back on.
We recommend the following uses for each attachment:

5. Keep the machine clean constantly. Disconnect power supply before
maintenance. Clean it with a piece of soft and damp cloth. Don’t clean it with
liquid or spraying detergent.
MAINTENANCE
The transmission gear box is greased in a factory, for best practice we recommend
checking the grease every 6 months. To add or refill grease, open the top cover,
then fill grease from aperture or replace the grease directly.
©SUPERA V.1.0 | October 2014
INSTRUCTION
MANUAL
Overload Switch
The Overload switch is situated at the
back of the machine beside the cable
entry. If the appliance becomes too
hot the Overload switch will stop the
machine automatically. If this
happens:
1. Turn Off the mixer.
2. Reduce the load in the mixing bowl.
3. Push the Overload switch back in to reset it.
4. Allow the appliance to cool for 20 minutes.
Note: In the event of a power cut the Overload switch will
cut in to prevent the appliance from restarting
automatically when power is restored.
Note: Always disconnect the Planetary Mixer from the mains
powers supply when not in use.
Overload
switch
•Always turn off the mixer and disconnect from the power supply before cleaning.
• Use warm soapy water to clean the bowl and mixing attachments. Do not use abrasive
cleaning chemicals as these can leave behind harmful residues.
• Clean the exterior of the appliance with a damp cloth.
• Dry all parts thoroughly after cleaning.
• Do not use jet/pressure washers to clean the appliance.
• Clean the appliance regularly.

TROUBLESHOOTING
WARNING!
If the equipment is out of function, please have it serviced by a professional.
©SUPERA V.1.0 | October 2014
INSTRUCTION
MANUAL
Fault Probable Cause Action
The appliance is not
working
The unit is not switched on Check the unit is plugged in
correctly and switched on
Turn button clockwise to releaseThe Stop button not released (HLM30)
Plug and lead are damaged Call agent or qualified
Technician
Fuse in the plug has blown Replace the fuse
Power supply Check power supply
The overload switch has activated See overload switch information in
the Operation section of this manual
Safety Guard not closed Close Safety Guard fully
Appliance not in gear Put in gear
Bowl not fully raised Ensure the Bowl lever is pushed
back fully
Bowl will not fit back in to
place
Bowl pins or surrounding area clogged
with mix
Clean the appliance
The appliance is
overheating
The mixing bowl is overloaded Turn off the appliance and empty
some of the contents
The appliance has been operating for too
long
Turn off the appliance and allow to
cool down for 30 minutes
The appliance is noisy Bowl or mixing attachment not
correctly fitted
Remove and refit bowl/mixing
attachment
Worn bearings/damaged gears Call agent or qualified
Technician
The mixing attachment
fails to rotate properly
The belt has become loose Call agent or qualified
Technician
Cannot select gear Gearing cogs misaligned Turn Off appliance and manually turn
the whisk attachment slightly. Select
the gear again.

PARTS OF SMX10-1
INSTRUCTION
MANUAL
©SUPERA V.1.0 | October 2014

INSTRUCTION
MANUAL
©SUPERA V.1.0| October 2014

PARTS OF SMX20-1
INSTRUCTION
MANUAL
©SUPERA V.1.0 | October 2014

INSTRUCTION
MANUAL
©SUPERA V.1.0 | October 2014

INSTRUCTION
MANUAL
©SUPERA V.1.0 | October 2014
PARTS OF SMX20-2

INSTRUCTION
MANUAL
©SUPERA V.1.0 | October 2014

PARTS OF SMX30-1
INSTRUCTION
MANUAL
©SUPERA V.1.0 | October 2014
©SUPERA V.1.0 | October 2014
SER.NO. PART.NO. DESCRIPTION SER.NO. PART.NO. DESCRIPTION
130-1 Hook 49 30-49 Support
230-2 Beater 50 30-50 Clamp Plate
330-3 Wire Whip 51 30-51 Nut
430-4-Version 4 Safety Guard 52 30-52 Base
530-5 Bowl 53 30-53 Bearing
630-6 Top Cover 54 30-54 Transmission Shaft Support
730-7 Screw 55 30-55 Key
830-8 Spring 56 30-56 Circlips for Shaft
930-9 Pin Shaft 57 30-57 Gear
10 30-10 Shifting Yoke 58 30-58 Bushing
11 30-11 Cam-Gear Shifter 59 30-59 Front Housing
12 30-12 Plate-Shifter Index 60 30-60 Worm Wheel
13 30-13 Handle-Shifter 61 30-61 MARK
14 30-14 Handle Set 62 30-62 Case
15 30-15 Turnset 63 30-63 Back Cover
16 30-16 Speed Handle 64 30-64 Internal Gear
17 30-17-Version 4 Plug Attachment Hub 65 30-65-Version 4 Switch Axle
18 30-18-Version 4 Overload Switch 66 30-66 Seal Up Ring
19 30-19-Version 4 Power Cord 67 30-67 Gear Shaft
20 30-20-Version 4 Power Supply Waterproof Connectors 68 30-68 Gear
21 30-21-Version 4 Contact Switch 69 30-69 Bushing
22 30-22 Hood Ring 70 30-70 Gear
23 30-23 Circlips for Shaft 71 30-71 Gear
24 30-24 Planet Gear 72 30-72 Plate
25 30-25 Operating Shelf 73 30-73 Plug 1
26 30-26 Bearing 74 30-74 Nut
27 30-27 Oil Seal 75 30-75 Spring Plate
28 30-28 Pin 76 30-76 Bearing
29 30-29 Working Shaft 77 30-77 Shaft Worm Gear
30 30-30 Declutch Shift Shaft 78 30-78 Key
31 30-31 Plate 79 30-79 Circlips for Shaft
32 30-32 Main Shaft 80 30-80 Circlips for Shaft
33 30-33 Nut 81 30-81 Plug 2
34 30-34 Top Batter Valve Cap 82 30-82 Buffalo 230V/50HZ Motor (with tool)
35 30-35 Flat valve Cap 83 30-83-Version 4 Stop Block
36 30-36 Bearing 84 30-84 Green Button
37 30-37 Spacer-Lower 85 30-85 Red Button
38 30-38 Super Machine Parts 86 30-86 Crank Lever
38-1 30-38-1 Super Machine Parts 87 30-87 Handle-Shifter
38-2 30-38-2 Gear 88 30-88 Connecting Rod
38-3 30-38-3 Roller 89 30-89 Spring
38-4 30-38-4 Spring 90 30-90 Spring Plate
39 30-39 Gear 91 30-91 Clamp Plate
40 30-40 Bushing 92 30-92 Distance Switch
41 30-41 Sleeve 93 93-Version 4 Capacitor
42 30-42 Gear 94 94-Version 4 Capacitor
43 30-43 Clamp Plate 95 95-Version 4 Switch Mounting Collar
44 30-44 Bearing 96 96-Version 4 Switch Compression Spring
45 30-45 Bushing 97 97-Version 4 Split Washer
46 30-46 Oil Seal 98 98-Version 4 The Left Guard
47 30-47 Body Housing 99 99-Version 4 The Right Guard
48 30-48 Bowl Hold Kits

INSTRUCTION
MANUAL
©SUPERA V.1.0 | October 2014

INSTRUCTION
MANUAL
©SUPERA V.1.0 | October 2014
Number:
Certificate:
DECLARATION OF CONFORMITY
Equiment Type:
Model:
Supera Food Mixer

www.SuperaCo.com
© Supera 2014 Version 1 | October 2014
LIMITED WARRANTY
SUPERA PLANETARY MIXER EQUIPMENT MODELS:
Planetary Countertop Mixers: [SMX5-1, SMX7-1, SMX10-1, SMX20-1, SMX20-2]
Planetary Floor Mixers: [SMX30-1]
SUPERA, LLC warrants to the original purchaser of new equipment that said equipment, when installed in accordance with
our instructions within North America and subjected to normal use, is free from defects in material or workmanship for one
year. Warranty includes onsite service calls within 60 miles of an authorized service company. End user is responsible for
all extra travel and mileage at prevailing rates and for original call to Supera expressing need for warranty service. Any
service provided without authorization from Supera, LLC will not be covered by Supera, LLC.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, WHETHER EXPRESSED OR IMPLIED. SUPERA, LLC
EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR EXPRESSED OR IMPLIED
WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. SUPERA, LLC HAS FINAL DESCRETION ON ALL
WARRANTY REQUESTS.
SUPERA, LLC’S OBLIGATION AND LIABILITY UNDER THIS WARRANTY IS EXPRESSLY LIMITED TO REPAIRING
AND REPLACING EQUIPMENT WHICH PROVES TO BE DEFECTIVE IN MATERIAL OR WORKMANSHIP WITHIN THE
APPLICABLE WARRANTY PERIOD. All repairs pursuant to this Warranty will be performed by an Authorized Designated
SUPERA, LLC Service Location during normal working hours. This warranty does not cover services performed at
overtime or premium labor rates. End user is responsible for the difference between normal service rates and premium
service rates. This warranty does not cover any service technician errors. IN NO EVENT SHALL SUPERA, LLC BE
LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES TO BUYER OR ANY THIRD PARTY, INCLUDING,
WITHOUT LIMITATION, LOSS OF PROPERTY, PERSONAL INJURY, LOSS OF BUSINESS OR PROFITS OR OTHER
ECONOMIC LOSSES, OR STATUTORY OR EXEMPLARY DAMAGES, WHETHER IN NEGLIGENCE, WARRANTY,
STRICT LIABILITY, OR OTHERWISE.
This warranty is given only to the first purchaser from a retail dealer. No warranty is given to subsequent transferees.
Installation in a residential application will void all warranties.
Warranty does not cover product failures caused by: failure to maintain, neglect, abuse, damage due to excess water,
fire, normal wear, improper set up and use. Periodic maintenance is not covered. Warranty does not cover service
requests for free replacement and/or recall parts.
THE FOREGOING WARRANTY PROVISIONS ARE A COMPLETE AND EXCLUSIVE STATEMENT BETWEEN THE
BUYER AND SELLER. SUPERA, LLC NEITHER ASSUMES NOR AUTHORIZES ANY PERSONS TO ASSUME FOR IT
ANY OTHER OBLIGATION OR LIABILITY IN CONNECTION WITH SAID EQUIPMENT.
Example of items not covered under warranty, but not limited to only these items:
1. Acts of God, fire, water damage, burglary, accident, theft.
2. Freight damage.
3. Improper installation or alteration of equipment.
4. Use of generic or after market parts.
5. Repairs made by anyone other than a SUPERA, LLC designated servicer.
6. Lubrication.
7. Expendable wear parts, adjustable feet, blown fuses, lamps, etc.
8. Cleaning of equipment.
9. Misuse or abuse.

Supera Customer Care Toll-Free Service Line:
1-866-953-3288
For additional product and warranty information,
please visit our website at:
www.SuperaCo.com