User Manual
Part Number:
300W High Powered Area Light
Important: Read all instructions prior to installation.
Included Parts
Specications
Optional Accessories
1 - 300 Watt Area Light (HPAL-NW300-BP9)
1 - Instructional Sheet
1 - Mounting Bracket
1 - Hardware
Universal Angle Mount Bracket (HPAL-UB)
Square Mount Fixed Arm (HPAL-FA)
Round Pole Slip Fit Bracket (HPAL-SF)
Rev Date: V1 12/21/2016
HPAL-NW300-BP9
HPAL-NW300-BP9
Intensity 34200 lm
Replacement For 800 Watt HID
Total Power Consumption 310 Watts
Operating Voltage Range 100~277 VAC
Beam Angle 90 / 90 degree
Color Temperature 5000 K
CRI >85
Operating Temperature -22~113°F (-30~45 °C)
IP Rating Weatherproof IP66
LED Lifetime 100,000 Hours
Fixture Weight 36.6 lbs (16.6Kg)
Standards and Certications ETL / CE / RoHS
Warranty 5 Years
Installation Instructions
Wiring Diagram
Optional Accessories
1. Remove power prior to installation.
2. Choose mounting method and preassemble light to mounting bracket.
3. Secure xture with mounting bracket to mounting surface.
4. Connect wiring to power supply. Black to Line, White to Neutral, and Green to Ground.
5. Restore power to circuit to test function then aim xture.
• This product should be installed by a fully certied electrician in accordance with local building
and electrical codes.
• Due to risk of electric shock, ensure that the main power source and circuit breakers are
switched o before performing any installation or wiring procedures.
• Failure to properly support the xture during installation may cause damage or injury, for which
the manufacturer is not responsible. Ensure the light bracket is securely mounted and will
support the weight of the xture.
Warnings
Line
Neutral
Ground
Black
L L
N N
GND GND
White
Green
HPAL-UB
Universal Angle Mount
HPAL-FA
Square Mount Fixed Arm Kit
HPAL-SF
Round Pole Slip Fit Kit
