Superchips ARCHOS43 User manual

1

SAFETY WARNING & CAUTION
Throughout this User Manual (Manual) you will see important messages regarding
your safety or the protection of your vehicle. These messages are designated by the
words WARNING and CAUTION.
WARNING indicates a condition that may cause serious injury or death to you, your
passengers or others nearby. Pay careful attention to these Warning messages, and
always comply with them. They could save a life.
CAUTION indicates a condition that could cause damage to your vehicle. It is
important to install and operate your product in conformance with instructions in this
Manual. Caution alerts you to particularly important things that will keep your vehicle
operating properly.
The device you have purchased is a high-performance product. As such, it does present
some risks of which you should be fully aware. Do not use this product until you
carefully read the following safety information and the Owner Agreement.
SAFETY
Always use your best judgment, and operate the vehicle in a safe manner. Do not
become distracted by the device while driving, and always be fully aware of all
driving conditions. Minimize the amount of time spent viewing the device screen
while driving.
Do not operate the device while driving. Perform all adjustments or changes while
stopped. Changing a setting while under way can interfere with your attention to
roadway conditions.
Use of the Speed Limiter removal, Wide Open Throttle restriction removal, and Tire
Pressure Monitor System adjustment features should only be used off the road, on the
track, or in other controlled driving environments. Do not exceed legal speed limits
on public roadways. Use any enhanced speed capabilities of this product only in
closed circuit, legally sanctioned racing environments expressly for this purpose. Loss
of control from speeding on a public road could seriously injure you, your passengers,
or others on the roadway.
Some modications may affect other parts of your vehicle. For example, if you remove/
adjust the speed limiter in your vehicle, be sure your tires and other components are
rated for the increased speeds they will have to withstand. Not doing so can lead to
loss of vehicle control. Modify the speed limiter only for use in closed-circuit, legally-
sanctioned racing environments, not for use on public roadways.
Always use and install the Superchips VIVID in compliance with the instructions and
manual provided.

INSTALLATION & OPERATION WARNINGS
When installing the VIVID LINQ and AndroidTM tablet units in the vehicle, securely
place the device so it does not obstruct the driver’s view of the road or interfere with
vehicle operating controls, such as the steering wheel, foot pedals, or transmission
levers. Do not place the Android tablet or VIVID LINQ in front of any airbag.
*Avoid cable routing that can interfere with pedal operation.
The windshield mount may not stay attached to the windshield in all circumstances.
Do not place the mount where it will become a distraction if the mount should become
detached. Keep your windshield clean to help ensure that the mount stays on the
windshield.
WARNING Misapplication or misuse of this product could lead to a serious
or fatal accident. Comply with all safety information in this manual, and your
vehicle owner’s manual. Follow safety, installation and operating instructions in
this User Manual to assure proper use.
PRODUCT HANDLING
Please observe all operating conditions relating to the Superchips VIVID.
This product is designed for normal room temperatures or temperatures suitable for
humans.
Please remove the product from the vehicle when not in use.
Do not leave the ARCHOSTM tablet on the dashboard or windshield when not in use.
If exposed to extreme temperature, the unit could become damaged. Remove
the Android tablet from the vehicle if it falls within the following scenarios:
 (1) Vehicleinteriorissubjectedto140˚Forhigher.
 (2) Vehicleinteriorissubjectedto32˚Forlower.
Do not “stack” Superchips VIVID tuning with other unauthorized tuning products.
“Stacking” performance-enhancing devices or other improper installation can cause
power train failure on the road. Other products may have features incompatible with
your VIVID device. Follow all installation and operating instructions, and do not stack
products.
Unit is sealed and is not to be serviced by user.
Unit can be damaged by violent impact.
If the vehicle will be sitting for long periods of time without being started, disconnect
the VIVID LINQ from the vehicles data port to prevent voltage draw from the battery.
NOTE: Dispose of this product consistent with local city and state codes. Return
to your electronics supplier for proper handling.

WARRANTY INFORMATION
This warranty gives you specic legal rights, and you may also have other rights which
vary from state to state.
LIMITED 1 YEAR WARRANTY
Powerteq (hereafter “SELLER”) gives Limited Warranty as to description, quality,
merchantability, and tness for any product’s purpose, productiveness, or any other
matter of SELLER’s normal use* of the product sold herewith. The SELLER shall be
in no way responsible for the product’s open use and service and the BUYER hereby
waives all rights other than those expressly written herein. This Warranty shall not be
extended or varied except by a written instrument signed by SELLER and BUYER.
The Warranty is Limited to one (1) year from the date of sale and limited solely to the
parts contained within the product’s kit. All products that are in question of Warranty
must be returned shipping prepaid to the SELLER and must be accompanied by a
dated proof of purchase receipt. All Warranty claims are subject to approval by the
SELLER.
Under no circumstances shall the SELLER be liable for any labor charged or travel
time incurred in diagnosis for defects, removal, or reinstallation of this product, or
any other contingent expenses. This shall constitute the sole remedy of the purchaser
and the sole liability of the SELLER. To the extent permitted by law, the foregoing is
exclusive and in lieu of all warranty and merchantability or tness. In no event shall
LITHIUM-ION BATTERY CAUTION
Do not expose the ARCHOS to temperatures over 140˚ F. Failure to follow these
instructions could cause the Lithium-Ion battery to leak acid, become hot, explode or
ignite and cause injury and/or damage. Please refer to the ARCHOS tablet manual
for additional product warnings, suggestions, and FCC compliance details. If the
battery leaks and you come into contact with the leaked uids, rinse thoroughly with
water and seek medical attention immediately.
Do not leave your battery charging for more than one week. Doing so runs the risk of
overcharging the battery and shortening its total life span.
MISUSE
It is highly recommended you read and comply with all instructions included in the
product manuals provided.
Raising or lowering the center of gravity of the vehicle can affect the overall stability
of the vehicle in certain situations.
Obey all federal and state vehicle rules and regulations.
Do not exceed proper operating conditions.
Please make sure the proper speed rated tires are installed on the vehicle prior to use.

SELLER or its suppliers be liable for special or consequential damages. If the BUYER
sends back a failed unit that is out of warranty and chooses to buy a refurbished unit,
the refurbished unit will only carry a 90 day warranty. If the BUYER purchases a new
unit at a predetermined discounted rate, it will have the standard 1 year warranty.
Under no circumstances will the SELLER be liable for any damage or expenses
incurred by reason of the use or sale of any such equipment.
THE INSTALLATION OF THIS PRODUCT INDICATES THAT THE BUYER HAS
READ AND UNDERSTANDS THIS AGREEMENT AND ACCEPTS ITS TERMS
AND CONDITIONS.
IN THE EVENT THAT THE BUYER DOES NOT AGREE WITH THIS
AGREEMENT, THE BUYER MAY PROMPTLY RETURN THIS PRODUCT, IN
A NEW AND UNUSED CONDITION, WITH A DATED PROOF OF PURCHASE,
TO THE PLACE OF PURCHASE WITHIN THIRTY (30) DAYS FROM DATE OF
PURCHASE FOR A FULL REFUND.
NOTE: This warranty is void for any new products purchased through auction web
sites, classied listings, or publications. Warranty is valid only for new products
purchased through Authorized Dealers (proof of purchase required for all warranty
claims).
*Intended normal use means this item is being used as originally intended and for
theoriginalapplicationassoldbyPowerteq.Anymodicationstothisitem,orif
it is used on an application other than as marketed, will VOID the warranty. It is
the sole responsibility of the customer to determine that this item will work on the
application they intend. Powerteq will accept no liability for custom applications.
SERVICE CENTER & COMPATIBILITY CAUTIONS
CAUTION: RETURN YOUR VEHICLE TO STOCK BEFORE TAKING IT TO
A SERVICE CENTER. All programmers are built to operate with OEM powertrain
software. If you take your vehicle to a service center they may, by your request or
otherwise, update your vehicle’s calibrations. If this happens and your vehicle has
not been returned to stock your device may no longer be capable of programming
your vehicle. Therefore, it is important that you return your vehicle to stock before
taking it in for service. Superchips updates its active products (i.e. those currently
being manufactured) to work effectively with updated OEM calibrations. However,
this process can take some time as Superchips is not always made aware of calibration
changes made by the OEM. In the case of discontinued products, Superchips cannot
ensure that your unit will work effectively if you take your vehicle to a dealership and
you are given, by your request or otherwise, a new calibration.
CAUTION: If you have used another tuner/programmer on your vehicle, you will
need to program the vehicle back to OEM stock and remove the device before using
the programmer. Failure to return to stock may result in PCM failure or engine
damage. Programming your vehicle may expose existing defects in the vehicle’s PCM
that could disable your vehicle. It is advised that you do not program your vehicle in
remote locations in case of vehicle failure.

CAUTION: The programmer was developed on a stock vehicle with no aftermarket
bolt-on parts; as such, the performance changes implemented by the programmer
may not be compatible with certain aftermarket power add-ons. See below for a brief
explanation of how the tuning may be affected by certain aftermarket devices.
COLD AIR INTAKE (CAI) KITS
Most modern-day vehicles use a Mass Air Flow (MAF) sensor. The MAF sensor is
generally located in the intake tube close to the factory air box. MAF sensors play
a key role in determining the amount of fuel an engine needs at any given throttle
position. MAF sensors are precisely calibrated for the factory intake systems; changes
in intake tube diameter, sensor placement, or lter ow Characteristics can adversely
affect the reading from the MAF sensor. Most of the CAI kits on the market change
intake tube diameter, sensor placement, or lter restriction. These changes may cause
the sensor to command leaner fuel conditions. Most of the CAI kits on the market are
developed on stock vehicles, where a leaner fuel curve may be acceptable. Due to the
fact that the programmer already alters the vehicle’s fueling strategies, CAI kits that
create a leaner condition used in conjunction with a programmer may cause the vehicle
to run excessively lean. Excessively lean conditions can cause pre-ignition which can
lead to detonation, a condition that could potentially damage an engine.
There are currently a large number of CAI kits on the market. These kits are designed
to improve air ow and temperature. Some of these kits may be compatible with
the programmer as is; however, others may cause a lean condition when used in
conjunction with the tuning. If you use the programmer in conjunction with a CAI
kit and you think you are experiencing a lean condition you may need to download a
revised tuning map from Superchips, if available. Please contact Superchips Customer
Service if you believe a CAI map is required for your vehicle conguration.
MECHANICAL MODIFICATIONS
Mechanical modications such as headers, upgraded camshafts, displacement
changes, cylinder head improvements, etc. will change the airow characteristics of an
internal combustion engine. The programmer is not tailored to take advantage of these
modications; for the best results we recommend vehicle-specic custom tuning.
FORCED INDUCTION (TURBOCHARGERS OR SUPERCHARGERS)
Turbochargers and Superchargers drastically change the dynamics/performance of
the engine, and its fueling/timing needs. Additional hard parts and custom tuning are
required to run a forced induction system on an engine that was originally designed as
a Naturally Aspirated (NA) engine. The programmer does not support the addition of
an aftermarket forced induction kit.

CARB/EPA COMPLIANCE
Superchips is at the forefront in bringing you up-to-date, street legal parts that comply
with federal and state emissions regulations. Superchips is working vigorously to be
street legal in all 50 states per established CARB (California Air Resources Board) and
EPA (Environmental Protection Agency) regulations.
Superchips applies for and obtains CARB executive orders (E.O.’s) for emissions-
related products and expects to be fully certied in 2011. CARB requires specialty-
parts manufacturers who sell emissions related products in California to obtain
certication for such parts. Failure to do so can result in nes and an inability to pass
routine Inspection and Maintenance (IM) tests conducted by the state.
Nationally, the EPA has similar guidelines, thus resulting in the installation of an
emission related part not supported by a CARB E.O., to be considered a violation of
the tampering provisions in both the California Vehicle Code and Federal Clean Air Act.
REGISTERING YOUR PRODUCT
Superchips recommends that you register your new VIVID online through the
Superchips website to start your warranty and make it easier to get support when needed.
BENEFITS OF PRODUCT REGISTRATION
Your Safety
Registering your product allows us to know exactly which product you have and
provide important product updates to you that improve the quality and/or safety of
the product.
Enhanced Features
Almost all Superchips products are easily updated via the internet. We are constantly
adding new features and improvements to our product that we know you will want to enjoy.
ConrmationofOwnership
Provides a record in case of product loss, theft, or required warranty work. If you call us
for support, our team will already have much of the information they need to help you.
Improved Product Development
Helps us better understand you (our customers) and design products that meet your needs.
Special Offers
Allows us to inform you about special offers on accessories and/or new products that
t your vehicle and enhance your driving experience.

USING THIS MANUAL
This manual includes coverage of the best known vehicle tuning applications. You
may be familiar with the some of the features on this product and this manual will help
you navigate through their operation on the device. Most of the menus, features and
operation are similar and common to each other for the various products.
When features or operations are different between OEMs, the various sections or
paragraphs will be identied to the application in most cases. Look for those pages or
sections related to your application and then choose the screen, features or option that
best t your needs.
NOTE: The display screens, menu items and operating instructions contained in the
following pages are meant to cover a wide variety of vehicles (Ford, Chevy, GMC,
Dodge, Chrysler, Jeep, Nissan, etc.). Every menu and feature is not shown in detail for
each device, but selection and changes are made in a similar manner using the different
devices. Some of the options and/or features covered in the operating instructions may
not apply to your device or vehicle. Your VIVID device will display only the menus,
options and features that are unique to your vehicle’s computer system capabilities. As
such, not every menu and screen is explained in this manual. Most screens are user-
intuitive and similar in functionality.

 n ARCHOS4
3
Android Tablet
with VIVID APP Preloaded
n VIVID LINQ
n USB Cables
n ARCHOS4
3
Windshield Mount
WHAT’S IN THE BOX
SUGGESTED TOOLS NEEDED
 n Scissors or clippers (to cut zip ties andor velcro to length)
n Glass Cleaner (to improve adhesion to windshield)
n Vehicle battery charger (ensures adequate voltage for PCM programming)
n Shade (improves your comfort during PCM programming)
ARCHOS4
3
Android Tablet VIVID LINQ
Windshield Mount
12V Car & 110V Wall Chargers
USB Cables
n 12V Car Charger
n 110V Wall Charger
n LINQ Zip Tie & Velcro Packet
n Instruction Manuals

Click on the word “Register” below user
name and password boxes.
UPDATING THE VIVID LINQ
Superchips has pre-loaded your new VIVID LINQ with all the applicable programs
for your vehicle from our vast tuning catalog. However, vehicle manufacturer’s
occasionally release new calibrations not detectable to Superchips at the time your
VIVID LINQ is manufactured. In the event your ARCHOS unit displays ‘Vehicle
Calibrationnotonle.Updateprogrammeronline.’ or ‘Needs update.’ message;
Superchips has developed an online process to provide you the up-to-date Superchips
tune for your vehicle.
Gaining access to the internet update site requires the user to rst download a free
internet driver to their Windows based PC when you visit www.superchips.com. Use
your mouse to arrow over the “Customer” icon at the top of the page and select the
“Download Internet Update Software” icon. Once on the page, read and follow the
directions. The third line has a link labeled “here” that will start the download.
Proceed to answer the questions that
come up during the process. At the
end of the questions, click on “install
the Superchips Easy Update”. Once
done you will be prompted to click on
Finish. At this point exit the web site
and look for the Superchips internet
update Icon that has been placed on
your desktop. Double click on the
Superchips internet update icon on
your desktop. A user registration box
will be shown.
REGISTERING THE VIVID LINQ
A registration box will appear where you will ll out the required information
to gain access to the update server.
You will create a unique username
and password for your security
giving you sole access to the internet
update site for downloading les and
updates when needed. Registrants
are required to ll out boxes with the
red asterisk next to them. Select the
“Submit” button at the bottom right
of the registration page to complete
the process.
You are now ready to update your
VIVID LINQ with the latest software
and options.

LOCATING THE MICRO USB PORT ON THE VIVID LINQ
The Micro USB port can be located at the bottom edge of the VIVID LINQ as seen
in the image.
Attach the micro USB cable to the
device in preparation for connecting to
the internet through your Windows PC.
Once the VIVID LINQ is plugged into
the USB port on your PC the server will
check to see what updates are available
for the device. If an update is available
the software will automatically be
updated. Superchips recommends you
update the VIVID LINQ prior to the
rst installation into your vehicle so
your product has the latest and greatest
les.
Some les and options are only presented to the user if the VIVID is vin-locked to your
vehicle. If you want to get the full list of options specic to your vehicle (some vehicles
have different options than others) it is recommended you install the programming
into your vehicle and then log back into Internet Update for a full list of features you
can take advantage of. The VIVID software needs to read the vehicle information in
order to accurately display available options in Internet Update. All software updates
are free. There are additional tuning options available for most applications that the
If at any point you need to update
your VIVID LINQ in the future,
look on your computers desktop for
the Superchips Internet Update Icon.
The icon is there so you have
a quick access point to the
internet update page.
Simply double click on the icon to
start the connection to the Internet
update server. You will be prompted
to log in with the username and
password you previously created in
the registration form.
**One way to speed up the login
process is by selecting the “Remember me on this computer” tab at the top right hand
side of the screen.
Once you’re logged in the VIVID LINQ will start downloading the latest updates. This
is an automatic process. Once the software update is complete you will be prompted to
“Safely plug the VIVID LINQ into a USB port on your PC.”

user can download as well. Some are available at no cost while others require the
user to purchase them to use. Select the appropriate options you want, and follow the
prompts to complete the download to your device.
Superchips has a large database of vehicle calibrations in inventory for most
applications but sometimes a few are missed, newer calibrationshave been created
since the product was manufactured requiring an update through Internet Update.
In the event you received the message, ‘Calibration for your vehicle is not currently
supported. Information about your vehicle has been sent to our engineers. You will
benotiedviae-mailwhentheSuperchipstuneisavailableforyourvehicle’ on
your VIVID even after updating online; you have a unique engine and /or transmission
le we have not seen before. At that point our engineering staff will take the data that
has been uploaded from your VIVID LINQ through Internet Update and create a new
custom le for your vehicle’s specic calibration.
In most cases, les are created and available online to download through Internet
Update within 2-4 business days. When the le has been completed and is loaded up
on Internet Update for you to download you will automatically receive a conrmation
email stating that your le is available.
Connect your VIVID LINQ to the Internet Update site. Once logged in, the LINQ will
automatically be updated with those les. When you are prompted, disconnect the
LINQ and program the vehicle.
UPDATING YOUR ARCHOS UNIT
It is recommended you check for ARCHOS updates at the same time you update your
VIVID LINQ so both units are running at the latest software available.
Connecting ARCHOS to the internet through a Wi-Fi connection:
nTouch the Home icon
nTouch the Menu icon
nTouch the Settings icon
nTouch Wireless & networks
nTouch Wi-Fi to add green checkmark
nTouch Wi-Fi settings to nd access point
nView Wi-Fi Access Point under Wi-Fi networks
nTouch Access Point to connect
Update the ARCHOS thru a Wi-Fi connection:
 n Touch the Home icon
n Touch the Grid icon
n Touch the AppsLib icon
You will be directed to the ARCHOS site where you can update to the latest les
available.
Apps can only be updated through a Wi-Fi connection.

UPDATING THE ARCHOS THROUGH USB ON YOUR PC
Use the supplied Micro USB
cable supplied in the VIVID box
to connect your ARCHOS unit
to your PC. The Micro USB port
can be located at the bottom edge
of the ARCHOS unit.
Attach one end of the micro USB
cable to the ARCHOS unit and
the other end to a USB port on
your PC.
The enclosedARCHOS handbook offers instructions
for updating the device or you can visit the Superchips
web site for a link to the ARCHOS update directory.
Before disconnecting your ARCHOS from your PC,
please make sure the battery in the device is charged
to 100%. If not, please charge the unit by either
leaving it connected to your PC or by using the wall
outlet charger included in the product box.
iCharging the ARCHOS battery to 100% will
ensure safe operation of the product when using the
VIVID software to tune your vehicle.
MOUNTING ON WINDSHIELD
The windshield mount supplied with your VIVID PAQ is designed to give you
exibility in mounting your device anywhere you’d like on your windshield.
The windshield mount allows the user a
hands free option for ease of tuning or
while using one of the additional software
features included in the product. The mount
is equipped with a locking suction cup, a
vertically adjustable arm, and a 360˚ pivot
head with spring loaded clips providing a
secure grip on the ARCHOS while allowing
the ability to ne tune the viewing angle to
your preference.
iBefore using the suction cup mount on your windshield, check the state and local
laws and ordinances where you drive. Some state laws prohibit drivers from using

suction mounts on the windshields while operating motor vehicles. Other state laws
allow the suction mount to be located only in specic locations on the windshield.
Many other states have enacted restrictions against placing objects on the windshield
in locations that obstruct the driver’s vision. It is the user’s responsibility to mount
the Superchips VIVID device in compliance with all applicable Laws and
Ordinances. Always mount your Superchips VIVID device in a location that does not
obstruct the driver’s view of the road. Superchips does not assume any responsibility
for any nes, penalties, or damages that may be incurred as a result of any state or local
law or ordinance related to the use of your VIVID device.
LOCATING OBD-II
The VIVID LINQ has a 16 pin OBD-II connector attached that plugs into your
vehicle’s OBD-II port located under the driver’s side dashboard.
The purpose of this connector is to provide a communication link between your vehicle
and your device as well as provide a power and ground source.
FORDDODGEGM/CHEVY
OBD-II port located under the driver’s side dashboard
(Locations may vary by make/model)

VIVID LINQ LED INFORMATION
Once connected to the vehicles data port the VIVID LINQ will have several LED
lights that become active.
Power LED (status light)
 n Device has Power: If the Red LED blinks (this light blinks at its own
interval when powered)
 n Device is in ERROR state: If the Red LED is solid and not blinking
or a long blink
 n Device has not paired yet with VIVID dongle: If only the Red LED
is blinking
Bluetooth connection LED
 n Device is IDLE if the Blue LED blinks every 2 seconds
 n Device is communicating: If the Blue LED is ashing very rapidly
(DAQ is on if constant rapid ash)
Your vehicle is already tuned (VIN-Locked) if both Red and Blue LEDs come on at
the same time for 1 second once plugged into vehicle port.
The VIVID LINQ can be attached indenitely to the vehicles OBD-II port if you plan
to use our Advanced Data Acquisition software included in the VIVID software suite.
If the vehicle will be sitting for long periods of time without being started periodically,
please disconnect the VIVID LINQ from the vehicle’s data port to prevent voltage
draw from the battery.
iThis cable must remain plugged into the vehicles OBD-II port throughout the
tuning process. Removal of the cable from the OBD-II port while tuning can result in
a vehicle no start.
POWERING UP THE ARCHOS FOR THE FIRST TIME
Make sure your ARCHOS device is 100% charged before tuning. After updating the
VIVID LINQ to the latest les online, plug the VIVID LINQ into the vehicle’s Data
Port and make sure the lights are NOT in one of the error conditions.
If the power light is blinking like it should (as described in the section above), the
ARCHOS can be connected to the LINQ via Bluetooth.
The power button is located on the lower right hand side of the ARCHOS unit. Pressing
the button will initiate the power on sequence.

USING THE VIVID SOFTWARE
Identify the VIVID application icon on the Android desktop. Touch the
icon to open the VIVID application. Wait for the connection between the
ARCHOS and VIVID LINQ to be made. When the connection has been
made a small “q” icon in the upper left hand side of the product will turn
blue. Once the two are paired the LED’s on the VIVID LINQ will be idle. You will
now have access to the VIVID application and all options available for your specic
vehicle application.
**In the Large Icon environment users can press the center icon and swipe left or right
to view additional icons.
Users can switch between views by touching the Grid Icon at the upper left
portion of the screen.
The Grid View
(Primary View)
The Large Icon View**
(Secondary)
The VIVID software offers
two optional views for users
to choose from:
PROGRAMMING YOUR VEHICLE
iThe programming process takes only a few minutes to install the tuning into the
vehicle. Please make sure all other power consuming devices such as the vehicles
stereo, blower motor, accessories using the cigarette lighter or power plugs (aside
from the VIVID charger), and dome light are turned off and any additional items that
require vehicle battery power to operate aside from the engine computer.
 n Warm-up vehicle prior to use in cold weather then switch
ignition OFF to start tuning.
 n Do NOT start vehicle during tuning process.
 n Do NOT leave device unattended while tuning.
 n Stay with the vehicle as you will be prompted to turn the ignition
switch ON/OFF a number of times depending on vehicle.

Verify the Bluetooth signal to the VIVID LINQ has been achieved by checking that the
LED lights are powered on the VIVID LINQ itself.
Next, select the “Tuning” icon to begin tuning your vehicle. You will be prompted
with two tuning options: Quick Tuning using Superchips-preferred vehicle settings or
Advanced Tuning with user adjustable vehicle settings.
Once in the tuning feature you will be prompted to select either a Quick Tune or
an Advanced Tune. The Quick tune provides the user with predetermined
Superchips optimized tuning levels. The Advanced Tune provides the user with the
opportunity to not only tune the performance of the vehicle but also a number of
drivetrain features depending upon the specic vehicle. Features such as transmission
shift point and rmness tuning, increases to the speed and rev limiters, Speedometer
corrections for tire and gear swaps, and much more...
Select the VIVID icon located
on the Android desktop to gain
access to the VIVID program.
A stock vehicle PCM
memory read will be
performed:
QUICK TUNING
This feature provides the user with predetermined Superchips optimized tuning levels.
ADVANCED TUNING
Allows the user not only the ability to change the power level of your vehicle it
also allows you the ability to select all of the options available for your application.
**Options may vary by OEM and vehicle type.

Depending upon your vehicle application
a series of tuning levels will be
provided to you for selection.
Once the engine tuning of your choice
has been selected and you have chosen
to use the Advanced Tuning feature
a list of user adjustable options will
be shown. A wireframe
model will be shown
detailing tunable options
available to that particular
vehicle on the vehicle
body as well as in the
icons at the bottom of the
screen.
Select the appropriate options you would like to revise using the touch screen menus.
We will use the Speed Limiter option as an example; however, there are numerous
options available depending on vehicle application. VIVID will only offer options
available for your specic application.
**The wireframe image shown will be custom to your application – Truck, Car, or SUV.
TUNING LEVELS

Select OK to verify your settings and
return to the previous screen. You
can select another option to adjust
other parameters or begin the PCM
programming process.
To begin programming the vehicle with
the setting you selected, click on the
Program icon located in the upper right
hand corner of the screen.
iPlease do not leave the device unattended while tuning the vehicle. You may be
required to cycle the ignition switch from the off position to the ignition on [engine
off, do not start] position several times during the tuning process.
Listing options to Raise the
value or leave it stock.
Selecting the Raised value will
increase the Speed Limiter to a
Superchips set increase in the limit.
iDo not start the vehicle at any point
in the tuning process or the process will
be interrupted. This causes issues with
communication between the device and
the vehicles computer and prompts the
VIVID to go into recovery mode.

Several bars detailing programming percentages as the VIVID installs the les into the
vehicles computers.
At this point the VIVID has completed its engine and transmission programming.
You will now be allowed to explore the additional VIVID options in the app.
iWhen asked to move the key forward do not start the vehicle.
SWITCHING TUNING LEVELS OR RETURNING TO STOCK
The diversity of the Superchips VIVID
programmer allows the user the ability
to change tuning levels and settings as
often as they see t. For instance, the user
might tow during the week but not on the
weekend. The user simply connects to
the tuning software portion of the VIVID
app. and re-tunes the vehicle to the chosen
tuning level the same way as described
in the, Programming Your Vehicle,
segment of this manual.
Once the vehicle has been tuned by the VIVID, a Stock Tuning Option
becomes available. Simply click on the VIVID tuning icon and search for
the Stock Icon in the list of tuning levels:
Follow the prompts
and your vehicle will
be returned to stock:
Your vehicle is now
returned to its original
stock programming.