SuperMax AC 9200 Power Plus User manual

USER’S GUIDE

General Safet (Warning)
Please read the following recommended instructions carefully to avoid the risk of your physical
injury before the product is operated.
- Check the receiver's operation voltage : AC90-250V, 50/60Hz.
General
Safet
y
(Warning)
- Do not cover the receiver and keep a clear space around the receiver for sufficient ventilation.
- Keep a liquid away from the receiver.
- The receiver shall not be exposed to dripping or splashing and the objects that filled with
liquids such as vases shall not be placed on the receiver.
- Unplug the receiver from the wall outlet before cleaning.
- Use a soft cloth and a mild solution of washing-up liquid to clean the casing.
- Do not block the receiver's ventilation slots which are provided for ventilation and
protection against overheating.
-
Maintain the receiver in the free airflow
-
Maintain
the
receiver
in
the
free
airflow
.
-Do not allow the receiver to be exposed to the hot, cold or humid condition.
- Do not use any cable and attachment that is not recommended as that may damage
your receiver.
- Unplug the receiver from the wall outlet and disconnect the cable between the
receiver and antenna when you will not use it for a long time.
- The wall outlet shall be placed near the receiver and shall be easily accessible
- Do not remove the cover to reduce the risk of electric shock.
1
- Do not attempt to service the receiver for yourself.
- Refer to a qualified service personnel for all technical supports.

Ctt
C
on
t
en
t
s
1. Overview
(1) The front of the digital receiver
(2) The back of the digital receiver
2. Remote control unit
3M Gid
3
3
4
5
3
.
M
enu
G
u
id
e
3.1 Manager
(1) Channel Manager
(2) Event Timer
(3) USB Manager
3.2 Installation
(1) Dish Setup
(2) Positioner Setup
(3) Auto Scan
5
5
5
6
6
6
6
(3)
Auto
Scan
(4) Blind Scan
(5) Factory Reset
(6) Information
3.3 System Setting
(1) GUI
(2) Video
(3) Parental Lock
(4) Time
6
6
7
7
7
7
7
8
8
(4)
Time
(5) Color setting
3.4 Interface
(1) Config
(2) Card
(3) CAM
(4) Ethernet
3 5 Utility
8
8
8
8
8
8
3
.
5
Utility
(1) Calendar
(2) Calculator
(3) Tetris
4. EPG (Electronic Program Guide)
5. Channel List information
6. Software upgrade by USB stick memory
8
8
9
9
10
2
7. Software upgrade by Serial (RS-232 cable)
8. Trouble shooting Guide
9. Specification
10
11
13

1Overview
1
.
Overview
(1) The front of the digital receiver
STANDBY Switches the receiver power On and Standby.
VOL UP/DOWN Volume up / down or selects the item of menu.
CH UP/DOWN
Channel up / down or selects the item of menu.
CH
UP/DOWN
Channel
up
/
down
or
selects
the
item
of
menu.
USB Connects your USB devices to USB Port.
Firmware update, data transfer and Save recording files available.
Card Slot [Optional] Insert Smart Card to this slot.
CI Slot [Optional] Insert CAM to this slot.
(2) The back of the digital receiver
LNB IN Satellite broadcasting signal input socket.
LNB OUT Satellite broadcasting signal output socket through the LNB IN
socket for another digital receiver.
RS-232 Connects to personal computer for software upgrade.
TV SCART [Optional] Composite video output socket for the television set
TV OUT Connects to RF-Modulator Cable.
Y/Pb/Pr [Optional] Component video output socket for the television set.
VIDEO Composite video output socket for the television set(yellow).
AUDIO L/R
Stereo audio output socket for the television set or the audio
AUDIO
L/R
Stereo
audio
output
socket
for
the
television
set
or
the
audio
system(white/red).
S/PDIF [Optional] Dolby digital output socket for the audio system.
LAN [Optional] This is allows you to set network Configuration for network
applications.
3

2 Remote Control Unit
STANDBY ( ) Switches between operation and standby
modes
SOURCE Switching among TV/AV/VCR mode
NUMERICAL BUTTONS (0~9) Used to enter a service
2
.
Remote
Control
Unit
number for service change or to specify values for menu
options
POSITIONER Control Diseqc1.2 or USALS miscellaneous
TUNING Control tuner signal miscellaneous
MUTE ( ) Mutes or un-mutes the audio temporarily
AUDIO Used to select alternative audio track and
audio channel (stereo, mono, etc)
SAVE
Si hh lAdi l
SAVE
S
av
i
ng eac
h
c
h
anne
l
s
A
u
di
o vo
l
ume.
BACK Recall
MENU Go to Menu
SAT Display Satellite list
EPG Electronic Program Guide
EXIT Exit
FAV Display Favorite channels list
INFO
Display channel detail information
INFO
Display
channel
detail
information
TV/RADIO Switching TV / RADIO channel
COLOR KEYS (CA+, F+ …) Special functions
TELETEXT ( ) Enters the digital text service
SUBTITLE ( ) Displays the subtitle language list
SLEEP TIMER ( ) Sets the sleep timer
UHF RF-Modulator Channel control
COLOR Adjust Video color
MULTICH Multi feed
REWIND ( ) Reverse playback
PLAY/PAUSE( ) Play files or Pause
FORWARD ( ) Fast Forward
RECORD ( ) Starting channel record (PVR)
STOP ( ) Stop recording
Record List ( ) Display Record list
4

3MenuGuide
3.1 Manager
(1) Channel Manager
You may sorting, moving, delete and edit Channel
names.
3
.
Menu
Guide
Press OK button. Then you can control channels by
Favorite, Lock channel, Hide channel, Move, Delete,
Edit name and Edit PID.
Note:
Detail usage is at Chapter 5. ‘Channel List information’
in this manual.
(2) Event Manager
Displaying record reservation list on this menu.
Event timer is possible to add EPG Menu and
Event Timer menu.
Event manager: Press RED (Insert) , you can see
the Edit event popup menu.
Event : you can setup as like “Record, Live, Wakeup,
Sleep”. And then setup other items and then press
Save. You can use event manager.
(3) USB Manager
USB functions are,
Press Sort key(Green button) then it shows Software →
Music → Photo → Movie
- S/W upgrade: Detail usage is at chapter 6. ‘S/W
upgrade by USB Stick memory.
- Music: MP3 format is available.
- Photo display: *.jpeg format is available.
- Movie: PVR/*.ts file format is available.
Press PVR file, you can play recorded channels.
- Delete: You ma
y
delete file b
y
p
ress Yellow button.
5
yyp

32I ll i
3
.
2
I
nsta
ll
at
i
on
In this chapter you can Searching channels,
Satellite Scan, Provider Scan, Edit TP/Satellite,
DiSEqC Positioner and Factory Reset.
(1) Dish Setup
This Chapter describes how to searching channels.
You can set Dish and LNB Information for channel
sea
r
c
hin
g.
sea c g.
Note:
Save: Red button.
Initialize: Green button.
Auto Scan : Yellow button.
Edit : Blue button.
(2) Positioner Setup
You can control several dishes by DiSEqC1.2 or USALS.
When you use USALS, please set Longitude
and Latitude in your area accurately.
Note
:
Auto Scan: Red button
Limit Setting: Yellow button.
(3) Auto Scan
Auto scan is convenient way searching
Multi-satellite in one time
Press Start scan, It will start searching.
Start Scan: Red button
Manual Scan: Green button
-you can search advance way as like PID search and
edit frequency also.
(4) Blind Scan
Searching all channels without TP information.
If you don’t know information about TP and dishes,
this function will help you searching channels easily.
6
Start Scan: Red button

(5) Factory Reset
(5)
Factory
Reset
Restore the product to the factory default.
Warning : Please note that once you perform Factory
reset, all data such as the antenna setting information,
channel list and user configured data will be deleted.
(6) Information
Display installed S/W information. You can check S/W
installed S/W version.
3.3 System Setting
In this chapter you can set options for System settings
Likes GUI languages, Video, Parental Lock, Time and
Color Setting options.
(1) GUI
- Language: English and various languages.
- GUI Timeout: You can select 1sec ~ 30sec
l
- GUI Transparency: You can se
l
ect 0% ~ 80%
- GUI Animation: None, Fade
(2) Video
-
Ch Zapping Mode: Pause, Blank, Fade
Ch
Zapping
Mode:
Pause,
Blank,
Fade
- Aspect Mode: 4:3, 16:9, Auto
- Screen Type: Letter Box, Center, Combined, Full
- Display Mode: PAL, NTSC, SECAM, PAL&NTSC
- Video Output: RGB, CVBS
- RF Channel: Insert channel number
- RF Tuning: M.N, B.G, I, D.K
7

(3) Parental Lock
Parental Lock
(4) Time
Adjust Time
- Auto: Adjust time from satellite signal automatically
-
Manual: Setting manually
Manual:
Setting
manually
.
(5) Color Setting
You can adjust Brightness, Contrast, Saturation.
3.4 Interface
[
O
p
tional
]
[p
]
In this chapter you can set Smart Card, Common
Interface, Network and Additional functions.
(1) Config
(2) Card [Optional]
(3) CAM [Optional]
(4) Ethernet [Optional]
3.5 Utility
In this chapter you can set Calendar, Calculator
(1) Calendar
(2) Calculator
8

4
EPG (Electronic Program Guide)
The Electronic Program Guide displays program
information about each channels, based on the date
and time. You can also schedule your recording using
the information given.
Press the EPG button.
4
.
EPG
(Electronic
Program
Guide)
1. Program Guide Information
You can view program information for all channels.
- More: Red button (You can see more EPG info.)
- 7days: Green button
- Booking: Yellow button
2. Booking
You can Record, Sleep, Wakeup channel as you select.
First you must to check in Event Manager menu
First
,
you
must
to
check
in
Event
Manager
menu
.
5. Channel List information
You can sorting channels by various way.
Di thi TVP OKbtt
D
ur
i
ng wa
t
c
hi
ng
TV
P
ress
OK
b
u
tt
on.
- All channels: Red button
- Sort: Green button
(Alphabet, CAS, Transponder, Satellite)
9