CPU
/CPU FAN
USB 0/1
AUDIO FP
DIMMB1
DIMMB2
HD AUDIO
USB4/5 USB6/7
DIMMA1
DIMMA2
JF1
Always populate blue sockets first;
Unbuffered ECC/Non-ECC DDR3 DIMM required
SLOT4 PCI-E 3.0 X8 (IN X16)
SLOT6 PCI-E 3.0 X16
SLOT7 PCI-E 2.0 X1
COM2
COM1
VGA/DVI
USB10/11(3.0)
T-SGPIO2
A-SATA0
A-SATA1
BIOS
Intel PCH
I-SATA0
BATTERY
The X10SAE supports up to 32GB of Unbuffered (UDIMM) DDR3 ECC/non-
ECC 1600/1333/1066 MHz in 4 memory slots. Populating these DIMM modules
with a pair of memory modules of the same type and same size will result in
interleaved memory, which will improve memory performance.
Note: For memory optimization, use only DIMM modules that have been validated by Supermicro.
For the latest memory updates, please refer to our website at http://www.supermicro.com/
products/motherboard.
Motherboard Layout and Features Jumpers, Connectors and LED Indicators
Note: Graphics shown in this quick reference guide are for illustration only. Your components may or may not look exactly the same as drawings shown in this guide.
Back Panel IO Connectors
Memory Support
Note: Refer to Chapter 2 of the User Manual for detailed information on memory support and CPU/
motherboard installation instructions.
Note: Refer to Chapter 2 of the User Manual for detailed information on jumpers, connectors, and LED indicators.
=mounting hole
A
B
C
H
I
DIMMB2
DIMMA2
DIMMB1
DIMMA1
Note:Up to 32GB of memory are supported. See chapter 2 of the User Manual for
complete memory population information.
Towards the CPU
Jumpers
Connectors
LED Indicators
DIMM Memory Installation
Memory Population Guidelines
When installing memory modules, the DIMM slots should be populated in the fol-
lowing order: DIMMA2, DIMMB2, then DIMMA1, DIMMB1.
•Always use DDR3 DIMM modules of the same size, type and speed.
•Mixed DIMM speeds can be installed. However, all DIMMs will run at the speed
of the slowest DIMM.
Recommended Population (Balanced)
DIMMA2 DIMMB2 DIMMA1 DIMMB1 Total System Memory
1GB 1GB 2GB
1GB 1GB 1GB 1GB 4GB
2GB 2GB 4GB
2GB 2GB 2GB 2GB 8GB
4GB 4GB 8GB
4GB 4GB 4GB 4GB 16GB
8GB 8GB 16GB
8GB 8GB 8GB 8GB 32GB
JBT1 CMOS Clear(See Chpt. 2)
JI2C1/JI2C2 SMB to PCI Slots Off (Disabled)
JHD_AC1Pins 1-2 (Enabled)
JPAC1Front Panel Audio Enable Pins 1-2 (Enabled)
JPI1 1394_1/1394_2 Enable Pins 1-2 (Enabled)
JPL1/JPL2 LAN1/LAN2 Enable Pins 1-2 (Enabled)
JWD1 Watch Dog Enable Pins 2-3 (NMI)
1394_1/21394 Connectors 1/2
Audio FP Front Panel Audio Header
HD AUDIO
BATTERY Onboard Battery
COM1/COM2 COM1/COM2 Port Headers
Fan1~Fan5 System/CPU Fan Headers (Fan1: CPU Fan)
HDMI/DP
JD1 Speaker/buzzer (Pins 3-4: Buzzer, Pins 1~4: External Speaker)
JF1 Front Panel Control Header
JL1 Chassis Intrusion Header
JLED1 Power LED Indicator Header
JPW124-pin ATX Main Power Connector (Required)
JPW2+12V 8-pin CPU power Connector (Required)
JSD1 SATA DOM (Device_On_Module) Power Connector
JSPDIF_OUT Sony/Philips Digital Interface (SPDIF)_Out Header
JSTBY1 Standby Power Header
JTPM1 Trusted Platform Module/Port 80 Connector
JVR1/JVR2PWM SMB programming headers 1/2(for debugging only)
JWOR1 Wake_On-Ring Header
KB/Mouse Keyboard/Mouse Connectors
LAN1/LAN2Gigabit (RJ45) Ports (LAN1/2)
SP1Internal Speaker/Buzzer
A-SATA0/A-SATA1 (ASMedia) Serial ATA (SATA 3.0) Ports 0/1 (6Gb/sec)
I-SATA0-I-SATA5 (Intel) Serial ATA (SATA 3.0) Ports 0-5 (6Gb/sec)
Slot 3/Slot 5/Slot 7 PCI-Express 2.0 x1 Slots
Slot 6 PCI-Express 3.0 x16 Slot (x8 if Slot 4 is used)
Slot 4 PCI-Express 3.0 x8 in x16 Slot
Slot 1, Slot 2 PCI 33MHz Slot (5V)
T-SGPIO 1/2 Serial_Link General Purpose I/O Connection Headers 1/2
USB 0/1, 2/3 Backpanel USB 2.0 Ports 0/1, 2/3
USB 10/11 Backpanel USB 3.0 Ports 10/11
USB 4/5, USB 6/7, USB 8/9 Front Panel Accessible USB 2.0 Headers 4/5, 6/7, 8/9
USB 3.0 12/13, 14/15 Front Panel Accessible USB 3.0 Headers 12/13, 14/15
VGA/DVI Backpanel VGA/DVI (Digital Video Interface) Port
LED1 Onboard Standby PWR LED Green: Solid on Power On
Front Panel Control (JF1)
CPU Installation
Power Button
OH/Fan Fail LED
1
NIC1 LED
Reset Button
2
HDD LED
Power LED
Reset
PWR
LED_Anode+
LED_Anode+
LED_Anode+
LED_Anode+
Ground
Ground
XX
NIC2 LED LED_Anode+
Backplane I/O Panel
A. USB 2.0 Port 0 G. Display/Port Connector N. SPDIF Out
B. USB 2.0 Port 1 H. USB 3.0 Port 10 O. Surround Out
C. Keyboard/Mouse I. USB 3.0 Port 11 P. Center/LFE Out
D. DVI Port J. Gb LAN Port 1 Q. Mic In
E. VGA Port K. USB 2.0 Port 2 R. Line Out
F. HDMI Port L. USB 2.0 Port 3 S. Line In
(N-S: HD Audio Jacks)
J
K
L
M
N
O
P
Q
R
HD Audio
S
Heatsink Installation
Heatsink
with Fan
Motherboard
Mounting Hole
Rev. 1.00
