Supernote Supernote A6 X User manual

Applicable Models
This manual will guide you to use Supernote, and the applicable model is
Supernote A6 X.
¾
Specifications
zSupernote
A6 X
Resolution͹
1872*1404
300DPI
Storage͹32G
RAM͹2G
Battery
capacity ͹
2900mAh
¾Structures
zSupernote
A6 X
Resolution͹
1872*1404
300DPI
Storage͹32G
RAM͹2G
1.
Battery
capacity͹
2900mAh

Quick start
1.1 Power on and the initial settings
1
澝Hold the power button on the top
right corner of device, until the
Supernote logo appears
If
cannot
turned on, the device might need
to be charged (Please refer to FAQ:
Unable
to power on or freezing problem
for help).
2
澝After first power on, please follow the instructions to complete initial settings͹
zSystem languages: English, Japanese, Simplified Chinese and Complex
Chinese
Please refer to the chapter language  date& time for more help
zWi-Fi settingsPlease refer to Connect to Wi-Fi
zAccount registration and login(Please refer to Register and login)
zPreferred Setting( Please refer to Preferred settings, all
Illustrations in this user
manual take the right-hand mode as an example.
zUser experience project(Please refer to User experience project on/off
zCreate your first E-NotebookPlease refer to Create a notebook

1.2 Connect to Wi-Fi
1
澝
Activate the top status
bar
Swipe down from the top of
the screen
z
Tap the settings icon
“
” on the top status
bar
zTap “WiFi”
2澝Wi-Fi
zTap “WLAN ON”
zSelect a SSID to
connect (enter
password if needed)
zTap “Other” to join
a
hidden network (enter
SSID, security and
password)
If the Wi
-Fi icon “
” is lit up, the device is connected. (You can try to log in your
account from your
device to confirm the connection status).

1.3 Register and log in
澝
Activate the top status bar
zTap the setting icon “ ”
澝 My account
zTap“Account
number
registration”
(If already registered, you
can login directly)
澝 Account
number
registration: both
mobile phone
number and email are available
z
Enter mobile phone number
or email address
zTap “Get code”
(The
verification code will be
sent via SMS or email)
z
Enter the verification code
zTap “Next”

澝 Set account password
zEnter the password twice
zTap “Register”
*Note͵After completing registration, it will jump to "Successful login" page to bind your
account to the device (Refer to "Cloud register and log in" or "Mobile APP quick login" to
get more registration methods).
The device can be only bound to a sole account and you have to reset the device to factory
settings if you want to switch to another account (Refer to "Reset" to restore factory
initialization settings).