suprema Secure Tamper User manual

2021/03/06 00:29 / How to configure Secure Tamper
- https://kb.supremainc.com/knowledge/
Table of Contents
How to configure Secure Tamper 1 ....................................................................................................
How to configure 1 ..........................................................................................................................
Case 1: 2 .....................................................................................................................................
Case 2: 3 .....................................................................................................................................

2021/03/06 00:29 1/4 How to configure Secure Tamper
- https://kb.supremainc.com/knowledge/
How to configure Secure Tamper
If the device is separated from the bracket (Tamper On event happens), the information on all users,
logs, encryption key and SSL certificates configured in the device will be deleted promptly.
Supported device:
Once the Tamper On event is generated, the users saved in BioStar 2 cannot be no longer
●
synchronized with the device. In this case, you should transfer users to the device manually.
Slave device is not supported.
●
How to configure
There are two cases to configure.

2021/03/06 00:29 2/4 How to configure Secure Tamper
- https://kb.supremainc.com/knowledge/
Case 1:
If you do not set Secure communication with device to Not Use in Setting > SERVER, you
should follow below instructions to configure secure tamper.
1. Go to Device Setting > Advanced.
2. Change Secure Tamper into On.
3. When the Tamper On event happens, you can see below message in BioStar 2.
Then, you can see the below event logs in Monitoring section. Especially, if you check the users and
logs on the device directly, they would be deleted completely.

2021/03/06 00:29 3/4 How to configure Secure Tamper
- https://kb.supremainc.com/knowledge/
Case 2:
If you set Secure communication with device to Use in Setting > SERVER, you can see
additional options below. Please see Server & device encryption key manual management.
If you change Server & device encryption key manual management into Use, you can see
below warning message. Please note that, if you configure this setting, the function Secure Tamper
will be applied automatically. Before you apply this setting, please be careful.

2021/03/06 00:29 4/4 How to configure Secure Tamper
- https://kb.supremainc.com/knowledge/
From:
https://kb.supremainc.com/knowledge/ -
Permanent link:
https://kb.supremainc.com/knowledge/doku.php?id=en:how_to_configure_secure_tamper
Last update: 2018/04/03 10:11