sure fit 83140D User manual

Wheelchair Cover and Cushion
Instruction Sheet for
Style # 83140D
Fits desk wheelchair
Patented U.S. Patent No. 7,278,649
Sure Fit wheelchair covers are compatible with manual wheelchairs, with
or without foot rest extensions. We recommend familiarity with manual
wheelchairs prior to applying cover. Please read entire instruction sheet
before applying wheelchair covers.
2/6/2012
1
Step 4 Install The Seat Cover and Cushion
1
23
4
Seat Cover
If you require additional assistance, call 800-914-7298.
If you require additional assistance, call 800-914-7298.
Easy Folding
a. On the inside of the frame cover, near the
seat, there are four flaps with gripper strips.
Tuck the two back flaps behind the seat, between
the back and the seat.
b. The seat cover has four gripper strips. Place
the seat cover onto the seat, aligning the two
side gripper strips with those on the frame
cover and press firmly to secure them together.
c. Pair the gripper strips on each side of the seat
cover’s skirt with strips inside the front of
the frame cover’s skirt and press them firmly
together to secure.
d. Pull the back flaps up onto the top of the seat
cover.
e. Place the covered cushion on the chair with the
zipper facing towards the back and align the
gripper strips to secure the cushion to the seat.
Note: The cover can remain on the wheelchair
when it is folded; simply remove the cushion
prior to folding. Always secure all gripper
strips after folding the wheelchair.
Frame Cover
4 Flaps

Step 1 Select a side of the foam cushion
Place the white memory foam face up if you prefer more comfort or the blue
layer face up if you prefer more support.
Step 2 Insert Cushion Into Cushion Cover
The top of the cushion cover is quilted. Keeping
the foam cushion in its plastic poly bag (open side
first), insert the cushion into the cushion cover;
then pull off and discard the poly bag and zip
shut. Set it aside.
Note: The cushion may be spot cleaned with a
damp cloth and mild detergent. Never submerge
it in water or try to machine wash or dry it.
Always allow the cushion to dry completely
before inserting it into the cover.
Tip: Fold the cushion in half before
reinserting it into the cover.
Your wheelchair cover has four separate pieces:
1) Foam cushion 2) Cushion Cover
3) Frame Cover 4) Seat Cover
Always apply brakes of wheel chair before applying cover.
Comfort
Support
2
Step 3 Install the frame cover
a. Lay the frame cover on a flat surface (non-quilted side up) and locate the two
handle openings at the top back. Stand behind the wheelchair and place the cover
over the back of the wheelchair, inserting the two handles through the openings.
3
b. Turn the arms inside out to locate two
interlocking sets of gripper strips.
c. Unhook and wrap back set of gripper strips over
and around the arm frame behind the arm rest
on the right side of the chair; firmly press the
entire length of the gripper strips together to
secure them onto the frame. Repeat on the left
side of the chair.
d. Firmly press the entire length of the vertical
gripper strips at the base of the right arm to
secure. Repeat on left side.
e. Wrap fabric flap around desk arm pipe
attaching horizontal gripper strips. Repeat on
the left arm pipe. Allow the skirt to fall between
the frame and the wheel.
The brake handle is located between the small
skirt and large skirt at the side of the chair.
Horizontal
gripper strip
Step e.