Sure-Loc S2 SCOPE User manual
Included with your S2 Scope:
A. #10 serrated Bellville washer (1)
B. #10flatspacerwasher(1)
C. 10-32 hex nut with 3/8” hex (1)*
D. 10-32 hex nut with 5/16” hex (1)*
*Extra parts included for mounting to
various other sights
E. .035” hex key wrench (1)
F. .050” hex key wrench (1)
G. 10-32 x 1 1/8 Socket head cap screw (1)
H. 10-32 threaded rod (1)*
For more info visit:
www.fieldlogic.com
www.sureloc.com
or scan the QR codes:
A.
C.
E.
F.
H.
G.
B.
D.
Ensurefiberisroutedproperlysoit
doesn’t get pinched in this step.
Be sure not to over-tighten. 14.
10.
11.
13.
12.
S2 SCOPE Instructions
SURE-LOC
Mounting the S2 Scope to your SURE-LOC Icon sight
2nd Axis Leveling for the S2 Scope
Be careful to not over-tighten – the level
canbreak.
Modifying S2 Scope for left hand
use or use with sights other
then the Icon
Ensurefiber
is routed properly so it doesn’t get
pinched in this step.
1.
4.
5.
6.
7.
8.
9.
Bottom ber cover
set screw
2.
3.
Push pin down
into position
A. B. G.
