Surefire ST07 User manual

THE SUREFIRE NO-HASSLE GUARANTEE
We’ll do what it takes to keep your SureFire gear running smoothly.
SureFire warrants that if you — our customer — purchase one
of our products, and we determine that it is defective in material
and/or workmanship during your lifetime, we will repair or replace
it — no hassle!
Our warranty does not cover consumables or normal wear-and-tear
— things like batteries draining, headbands and headpads wearing
out, ink cartridges running out, and switches wearing out — or
damage resulting from abuse, alterations, unauthorized repairs, or
use contrary to SureFire’s user manuals.
Should you need a replacement product, SureFire reserves the
right to replace an obsolete product with a current production,
like model. In the event that any issue with a SureFire product is
not covered under this warranty SureFire can arrange to have the
product repaired for a reasonable fee.
STANDARD DISCLAIMER
Except as specified above or prohibited by applicable law: all express
or implied conditions and warranties, including, without limitation,
any implied warranty or condition of merchantability or fitness for
a particular purpose, or accuracy of any informational content, are
hereby excluded and disclaimed by SureFire; and in no event will
SureFire be liable for any special, direct, indirect, consequential,
incidental or punitive damages howsoever arising and regardless
of the theory of liability, even if advised of the possibility of such
damages. Products, prices, availability, specifications, and offers
are subject to change or cancellation at any time without notice.
WARRANTY CLAIMS
For claims, contact Customer Service at 714-545-9444 to obtain a
Return Merchandise Authorization number (RMA#). Then package
the unit carefully and send to (no CODs):
SureFire, LLC.
Repairs Department, RMA#____
17680 Newhope Street, Suite B
Fountain Valley, CA 92708
SureFire will pay any reasonable shipping costs to return the unit to you.
MAINTENANCE
Use a clean, dry cloth to wipe off body and window. Periodically clean
and lubricate threads. Apply a thin coat of non-migrating, silicon-based
lubricant to O-rings (do not use petroleum-based lubricants which
can harm O-rings). For additional tips on maintaining your SureFire
illumination tool, visit www.surefire.com/faqs-maintenance.
ACCESSORIES
SureFire makes a full line of accessories for most of its illumination
tools. For a complete listing, visit www.surefire.com/partsaccessories.
Revision A 3-2020
71-01-1108
18300 MT. BALDY CIRCLE,
FOUNTAIN VALLEY, CA 92708-6122
SUREFIRE.COM USER MANUAL
REMOtE tAPE SWitcHES
REMOtE tAPE SWitcHES
SR07-D-IT
SR07
ST07

INTERFACING TAILCAPS & REMOTE TAPE SWITCHES
CONNECT
To connect a tailcap and a remote tape switch, unplug the tailcap
connector cover and insert remote tape switch connector until it
clicks into place.
DISCONNECT
To disconnect remote tape switch connector from tailcap, grasp the
remote tape switch connector firmly then twist and pull.
SWITCH OPERATION
SR07
Press pressure pad for momentary activation; click pushbutton for
constant-on
SR07-D-IT
Press pressure pad with bump to activate Weapon Light
Press pressure pad w/o bump to activate auxiliary device
ST07
Press pressure pad for momentary activation
TAILCAP OPERATION
DS
Partially press for momentary activation; click for constant-on. If a
pressure pad is installed, see applicable instructions below
UE
Requires remote tape switch
XT
Push toggle switch left to enable system; Push toggle switch right
to disable (Fig 1). For momentary-on, press tailcap switch forward.
For constant-on, rotate tailcap toggle switches up or down; rotate in
opposite direction to turn light off (Fig 2).
SWITCH MOUNTING
SR07 / SR07-D-IT
Attach hook ends of remote tape switch to picatinny rail edges. Both
remote tape switches provide two areas for optional use of tie wraps
(not included) for added mounting security (Fig 3).
ST07
Use included alcohol wipe to clean the remote tape switch and
installation site of the firearm. Remove both strips of Velcro®
(included) adhesive backing and apply to the desired mounting area
of the firearm, then adhere switch to the Velcro®.
XT
Install tail cap by hooking hindges to the WeaponLight hinge pin (Fig 4).
REMOtE tAPE SWitcHES
DS00 ST07
SR07-D-IT
SR07XT00
UE
FIGURE 2 FIGURE 4
HINGE PIN
HINGE
FIGURE 3
HOOK
FIGURE 1
ENABLED DISABLED