Surfsight RemoteFound AI-12 User manual

RemoteFound AI-12: User Guide

Need Help?
surfsight.net
[e-mail]

We are excited to introduce to you your new Surfsight
AI -12 Connected Dashcam.
Surfsight is your next step in fleet safety packed into a
sleek powerful device.
Now all you have to do is sit back. Surfsight will
capture the drive and protect you on the road.
Thank you!
01

02
Explore Surfsight
View live video from your vehicle anytime, anywhere, from
any device.
Real-time detection of harsh driving incidents and unsafe
driving behavior.
Audio-alerts provide real-time feedback for a safer driving.
Video footage from harsh driving incidents stored in the
cloud for on-demand retrievals and sharing.

What’s in the box
AI-12 Camera Mounting bracket
USB cable Specialty screwdriver
03

What’s in the box: Surfsight AI-12 Features
Mounting
bracket slot
1080P HD
adjustable 140°
angle camera
Tamper resistant
cover for SIM and
SD card slots
Road-facing camera
04

05
Cabin-facing camera
720P HD
adjustable wide
angle camera
Power & auxiliary
inputs with
locking screws
Rotating and
locking rings
SOS buttonTouch screen
IR for clear night
vision

Unscrew the safety screws that lock the tamper proof case
using the specialty screwdriver
Insert the SIM and SD cards
Attach the mounting bracket to the camera
Make sure the windshield is clean and dry
Make sure that the vehicle is parked on a level surface
Place the camera as high as possible on the driver side of
the vehicle
Remove the 3M adhesive tape cover, and mount the
camera to the windscreen
Install Surfsight AI-12
06

DO NOT INSTALL THE PRODUCT IN A LOCATION WHERE IT CAN
OBSTRUCT THE DRIVERS FIELD OF VISION.
07

Unmount the camera from the windscreen. Make sure
that the mounting bracket is not inserted, as it locks the
camera position
Use the screwdriver provided to unscrew the three
security screws on the round side of the camera
Unscrew the screws to rotate the cameras. Do not unscrew
the screws all the way
Screws
Power jack
Direct the camera
08

Mount the camera back to the windscreen
Connect the camera to a power source (page 12)
The camera will turn on automatically
To unlock the camera touch screen enter a default PIN
number 3333 (page 13)
09

On the main screen enter to the ‘Live View’ mode
Use the ‘Live View’ to direct the road facing camera and the
cabin facing camera to the proper direction. You can use
the arrow keys to switch between the views
Unmount the camera from the windscreen and screw in
the security screws. Mount the camera back on the
windscreen
Arrow keys to switch
between the views
Direct the camera
10

Live View
11

Power jack
Surfsight may only be connected to a power source using
the supplied cables
The power cable connects to the round connector located
on the round side of the camera
The power source must provide 5V DC and at least 2A
when connected through the supplied USB cable
Connect the camera to a power source
12

Press the camera touchscreen
Enter the default PIN number 3333
The camera is now unlocked. You entered the camera
main menu
Unlock the camera
13

Surfsight AI-12 contains an internal accelerometer that detects
unsafe driving events. The accelerometer is not calibrated in
advance as the installation in every vehicle is different. Please
follow the following steps to calibrate the accelerometer.
Turn on the vehicle ignition
Check that the camera turns on
Press the touchscreen and enter the default PIN number
3333
Enter the ‘Settings’ mode in the main menu
Select ‘Calibrate’
Calibrating the camera sensors
14

Enter the ‘Settings’ mode in the main menu to set your camera:
Calibration the camera accelerometer
Cabin facing camera
WiFi connectivity
Voice alerts
Distracted driver
Overlay text in the video recordings
Set a new PIN number to unlock the camera
Adjust volume and screen brightness
Setting menu
15

Live view
View live video
Enter the ‘Live View’ mode in the main menu
The live video will be displayed on the screen
Use the arrow keys below the screen to switch between
the road and cabin facing cameras
Use the arrow back button to return to the main menu
16

Arrow keys to switch
between the views Back
17

View recorded videos
Enter the ‘Recordings’ mode in the main menu
All the recorded videos on the SD card will be displayed in
a list, sorted by date and time
Use the arrow buttons to scroll through the list
Select the video you would like to view and then click the
‘Play’ button
18