Surfsight Transflo AI-12 User manual

2. Mount the camera
1. Insert SIM and SD Cards
surfsight.net| [e-mail]
WARNING:This type of installation should be performed by aqualified individual or professional only. Working with
your vehicle's power system can be dangerous to both you and your vehicle if you do not know what you are doing! If
you have any doubts, please consult a professional.
For up to date support articles and installation guides please visit our support web pages at surfsight.net under Docs.
In case the camera is not pre-installed with an SD and SIM cards, please follow the
following step to insert the SD and SIM cards. Using the specialty screwdriver supplied
with the product, unscrew the safety screw that locks the tamper proof case of the SD card
and SIM cards on the side of the camera.
Attach the mounting bracket to the camera, remove the 3M adhesive tape cover and
mount the camera to the windscreen. The camera should be placed as high as possible on
the driver side of the vehicle.
Make sure the glass is clean and dry before attaching the 3M adhesive mount to the
windshield.
PACKAGE CONTENTS
AT A GLANCE
INSTALLATION STEPS
The following diagrams provide an overview of the Surfsight AI-12 Dashcam
AI-12 Camera Optional: OBD
Power Adaptor
USB CableMounting Bracket Optional:
Hardwire Kit
Specialty
Screwdriver
1080p 140°wide cabin facing
Power and auxiliary inputs with
locking screws
Rotating and
locking ring
SOS buttonTouch
screen
Mounting bracket slot
1080p 140°wide
road facing
camera
Tamper resistant
cover for SIM and
SD crad slots
WARNING Do not install the product in a location where it can obstruct the drivers field
of vision.
DASH CAM Quick Installation Guide

3. Connect the camera to a power source
Option 3: Hardwire Kit
Open the vehicle fuse box and connect as follows:
1.Red Color Wire – Ignition Power, connect it to a fuse
port that has power only when the car is turned on
(verify this during installation)
2.GND – Find a reliable iron port to connect affix the
ground wire to the iron port.
The dashcam may connect to a power source either using the supplied USB cable, OBD
cable or hardwire kit. The power cable connects to the round connector located on the side of
the camera. After Power is connected, run the power cable along the headliner of the car
along the A-Pillar to the power source.
Option 1: OBD Cable
Connect to the OBD port
in your vehicle
4. Direct the cameras at the road and driver
Follow the following steps to direct the road and cabin facing cameras.
1.Unmount the camera
2.Using the security screwdriver provided, gently partially unscrew the three security screws
on the round side of the dashcam until you can rotate the front and cabin facing cameras.
Do not unscrew the screws all the way.
3.Mount the camera and connect it’s power source.
4.Tap the touch screen to enter default PIN – 3333 to entre the main menu and click on Live
View. You can use the arrow keys to switch camera views.
5.Rotate the cameras until the cameras are directed in the proper direction.
6.Unmount the camera and screw in the security screws on the side of the camera
Run the power cable along the headliner of the car along the A-Pillar to the power source.
Option 2: USB Cable
The power source should
be able to supply 5V 2A.
surfsight.net| [e-mail]
DASH CAM Quick Installation Guide

Step Done
1Insert SD card and SIM card
2Mount the camera
3Connect the camera to a power source
4Direct the cameras at the road and driver
4Calibrate the accelerometer
5Login to surfsight.net
6Check live video front front and rear camera
CHECKLIST FOR A SUCCESSFUL INSTALLATION
1. Open your internet browser and browse to surfsight.net
2. Click on the Login button and login if you already have a Surfsight account, then
login to your account.
3. If you do not have a Surfsight account, you can create a new account for your
dashcam, by clicking on the Signup page.
4. Enter a new account by entering the following:
A. Your email
B. A password
C. The device’s IMEI number. The IMEI number can be found on the
sticker on the camera itself or on the back side of the carton box
which contained the camera.
D. A unique organization name to identify your organization.
5. Turn on your car’s ignition switch
6. After about a minute you should see your dashcam’s imei number in the list of
devices with a green icon next to it indicating it is online.
7. Click on your dashcam in the web portal and choose Front and Rear camera
video icons to view live video from your dashcam
SIGN UP TO VIEW LIVE VIDEO
CALIBRATE DASHCAM ACCELEROMETER
IMPORTANT
The dashcam contains an internal accelerometer that detects dangerous driving behavior to automatically create video
events.
Cabin facing cameras must be directed at the driver
The dashcam accelerometer is not calibrated before installation as every vehicle and installation is different, please follow
the following steps to calibrate the dashcam accelerometer and direct the cameras:
1.Turn on the ignition in the vehicle
2.Make sure that the dashcam is working
3.Make sure that the vehicle is parked on a level surface.
4.Press the dashcam touchscreen and enter the default PIN code – 8888
5.Press on the Settings button and choose calibra
surfsight.net| [e-mail]
DASH CAM Quick Installation Guide