Suzuki GSX-R1000/A User manual

99011-47H57-01AGSX-R1000/A
Part No. 99011-47H57-01A May, 2015 EN
© COPYRIGHT SUZUKI MOTOR CORPORATION 2015 Printed in Japan
GSX-R1000/A
OWNER’S MANUAL
TK L6
Top
1st cover4th cover
Top
1st cover4th cover
Top
1st cover4th cover
Top
1st cover4th cover
Pantone 303C (CMYK: 100, 0, 0, 85)
Pantone 485 (CMYK: 0, 100, 100, 0 )
Pantone 294 (CMYK: 100, 70, 0, 0)
Black
4/14/14/14/1
6 mm
GSX-R1000/A (99011-47H57-01A) 6 mm GSX-R1000/A (99011-47H57-01A) 6 mm GSX-R1000/A (99011-47H57-01A) 6 mm GSX-R1000/A (99011-47H57-01A)

This manual should be considered a permanent part of the
motorcycle and should remain with the motorcycle when resold
or otherwise transferred to a new owner or operator. The
manual contains important safety information and instructions
which should be read carefully before operating the motorcycle.
Top
3rd cover2nd cover
Black
4/1
6 mm
GSX-R1000/A (99011-47H57-01A)

IMPORTANT
BREAK-IN (RUNNING-IN)
INFORMATION FOR YOUR
MOTORCYCLE
The first 1600 km (1000 miles) are the
most important in the life of your
motorcycle. Proper break-in operation
during this time will help ensure maxi-
mum life and performance from your
new motorcycle. Suzuki parts are
manufactured of high quality materi-
als, and machined parts are finished
to close tolerances. Proper break-in
operation allows the machined sur-
faces to polish each other and mate
smoothly.
Motorcycle reliability and perfor-
mance depend on special care and
restraint exercised during the break-in
period. It is especially important that
you avoid operating the engine in a
manner which could expose the
engine parts to excessive heat.
Please refer to the BREAK-IN (RUN-
NING-IN) section for specific break-in
recommendations.
 WARNING/  CAUTION/
NOTICE
/NOTE
Please read this manual and follow its
instructions carefully. To emphasize
special information, the symbol 
and the words WARNING, CAUTION,
NOTICE and NOTE have special
meanings. Pay particular attention to
messages highlighted by these sig-
nal words:
NOTE: Indicates special information
to make maintenance easier or
instructions clearer.
WARNING
Indicates a potential hazard that
could result in death or serious
injury.
CAUTION
Indicates a potential hazard that
could result in minor or moderate
injury.
NOTICE
Indicates a potential hazard that
could result in vehicle or equip-
ment damage.

FOREWORD
Motorcycling is one of the most exhil-
arating sports and to ensure your
riding enjoyment, you should become
thoroughly familiar with the informa-
tion presented in this Owner’s Manual
before riding the motorcycle.
The proper care and maintenance
that your motorcycle requires is out-
lined in this manual. By following
these instructions explicitly you will
ensure a long trouble free operating
life for your motorcycle. Your autho-
rized Suzuki dealer has experienced
technicians that are trained to provide
your machine with the best possible
service with the right tools and equip-
ment.
All information, illustrations and speci-
fications contained in this manual are
based on the latest product informa-
tion available at the time of publica-
tion. Due to improvements or other
changes, there may be some discrep-
ancies between information in this
manual and your motorcycle. Suzuki
reserves the right to make changes at
any time.
Please note that this manual applies
to all specifications or all respective
destinations and explains all equip-
ment. Therefore, your model may
have different standard features than
shown in this manual.

TABLE OF CONTENTS
1
2
3
4
5
6
7
8
CONSUMER INFORMATION
CONTROLS
FUEL, ENGINE OIL AND COOLANT RECOMMENDATIONS
BREAK-IN (RUNNING-IN) AND INSPECTION BEFORE RIDING
RIDING TIPS
INSPECTION AND MAINTENANCE
TROUBLESHOOTING
STORAGE PROCEDURE AND MOTORCYCLE CLEANING
SPECIFICATIONS
INDEX

1-1
1
CONSUMER INFORMATION
ACCESSORY USE AND MOTORCYCLE LOADING ......................................... 1-2
SAFE RIDING RECOMMENDATION FOR MOTORCYCLE RIDERS ................ 1-4
LABELS ............................................................................................................... 1-5
SERIAL NUMBER LOCATION ............................................................................ 1-6
NOISE CONTROL SYSTEM (AUSTRALIA ONLY) ............................................ 1-6

1-2
CONSUMER
INFORMATION
ACCESSORY USE AND
MOTORCYCLE LOADING
ACCESSORY USE
The addition of unsuitable accesso-
ries can lead to unsafe operating con-
ditions. It is not possible for Suzuki to
test each accessory on the market or
combinations of all the available
accessories; however, your dealer
can assist you in selecting quality
accessories and installing them cor-
rectly. Use extreme caution when
selecting and installing the accesso-
ries on your motorcycle and consult
your Suzuki dealer if you have any
questions.
ACCESSORY INSTALLATION
GUIDELINES
• Install aerodynamic-affecting
accessories, such as a fairing,
windshield, backrests, saddle-
bags, and travel trunks, as low as
possible, as close the motorcycle
and as near the center of gravity
as is feasible. Check that the
mounting brackets and other
attachment hardware are rigidly
mounted.
• Inspect for proper ground clear-
ance and bank angle. Inspect that
the accessory does not interfere
with the operation of the suspen-
sion, steering or other control
operations.
• Accessories fitted to the handle-
bars or the front fork area can cre-
ate serious stability problems.
This extra weight will cause the
motorcycle to be less responsive
to your steering control. The
weight may also cause oscillations
in the front end and lead to insta-
bility problems. Accessories
added to the handlebars or front
fork of the machine should be as
light as possible and kept to a
minimum.
• Select an accessory which does
not limit the freedom of rider
movement.
• Select an electric accessory
which does not exceed motorcy-
cle’s electrical system capacity.
Severe overloads may damage
the wiring harness or create haz-
ardous situations.
• Do not pull a trailer or sidecar.
This motorcycle is not designed to
pull a trailer or sidecar.
WARNING
Improper installation of accesso-
ries or modification of the motor-
cycle may cause changes in
handling which could lead to an
accident.
Never use improper accessories,
and make sure that any accesso-
ries that are used are properly
installed. All parts and accesso-
ries added to the motorcycle
should be genuine Suzuki parts or
their equivalent designed for use
on this motorcycle. Install and use
them according to their instruc-
tions. If you have any questions,
contact your Suzuki dealer.

1-3
LOADING LIMIT
• Never exceed the G.V.W. (Gross
Vehicle Weight) of this motorcycle.
The G.V.W. is the combined
weight of the machine, accesso-
ries, payload, rider and passen-
ger. When selecting your
accessories, keep in mind the
weight of the rider as well as the
weight of the accessories. The
additional weight of the accesso-
ries may not only create an unsafe
riding condition but may also
affect the riding stability.
G.V.W.: 390 kg (860 lbs)
at the tire pressure (cold)
Front: 250 kPa (2.50 kgf/cm
2
, 36 psi)
Rear: 290 kPa (2.90 kgf/cm
2
, 42 psi)
LOADING GUIDELINES
This motorcycle is primarily intended
to carry small items when you are not
riding with a passenger. Follow the
loading guidelines below:
• Balance the load between the left
and right side of the motorcycle
and fasten it securely.
• Keep cargo weight low and as
close to the center of the motorcy-
cle as possible.
• Do not attach large or heavy items
to the handlebars, front forks or
rear fender.
• Check that both tires are properly
inflated to the specified tire pres-
sure for your loading conditions.
Refer to page 6-38.
• Improperly loading your motorcy-
cle can reduce your ability to bal-
ance and steer the motorcycle.
You should ride at reduced
speeds, less than 130 km/h (80
mph), when the cargo is loaded or
accessory is fitted.
• Adjust suspension setting as nec-
essary.
WARNING
Overloading or improper loading
can cause loss of motorcycle con-
trol and an accident.
Follow loading limits and loading
guidelines in this manual.
WARNING
Placing objects in the space
behind the fairing can interfere
with steering and can cause loss
of control.
Do not carry any objects in the
space behind the fairing.

1-4
MODIFICATION
Modification of the motorcycle, or
removal of original equipment may
render the vehicle unsafe or illegal.
The frame of this motorcycle is made
of an aluminium alloy. Therefore,
never make any modifications such
as drilling or welding to the frame as it
weakens the strength of the frame
significantly. Failure to heed this
warning could result in an unsafe
vehicle operating condition and sub-
sequent accident. Suzuki will not be
responsible in any way for personal
injury or damage to the motorcycle
caused by frame modifications. Bolt
on accessories that do not modify the
frame in any way may be installed
provided that the GVW is not
exceeded. For the GVW, refer to the
ACCESSORY USE AND MOTORCY-
CLE LOADING section of this owner’s
manual.
SAFE RIDING
RECOMMENDATION FOR
MOTORCYCLE RIDERS
Motorcycle riding is great fun and an
exciting sport. Motorcycle riding also
requires that some extra precautions
be taken to ensure the safety of the
rider and passenger. These precau-
tions are:
WEAR A HELMET
Motorcycle safety equipment starts
with a quality helmet. One of the most
serious injuries that can happen is a
head injury. ALWAYS wear a properly
approved helmet. You should also
wear suitable eye protection.
RIDING APPAREL
Loose, fancy clothing can be uncom-
fortable and unsafe when riding your
motorcycle. Choose good quality
motorcycle riding apparel when riding
your motorcycle.
INSPECTION BEFORE RIDING
Review thoroughly the instructions in
the “INSPECTION BEFORE RIDING”
section of this manual. Do not forget
to perform an entire safety inspection
to ensure the safety of the rider and
its passenger.
WARNING
Modification to an aluminum alloy
frame, such as drilling or welding,
weakens the frame. This could
result in an unsafe operating con-
dition and may lead to an acci-
dent.
Never make any modifications to
the frame.