SVAGO SV-395 User manual

CHAIR ASSEMBLY 4
SERIAL NUMBER LOCATION 6
5
7
8
9
10-13
14
15
16-18

Step 2
Push the headrest frame forward.
Step 1
Unfold the backrest frame, x the “L” shaped latch
on both sides, then attach the rear fabric cover
with velcro.
Step 3
Unzip the zipper of the back cover to the end,
then pull up the pad and put it onto the headrest
frame.
Step 4
To ensure the pad set will not occur any damage
during assembly, review the notes below:
• The backrest pad is one piece from head to feet.
Before putting on the pad, please check and
ensure the feet and seat parts are already tightly
attached.
• Make sure the back cover is unzipped before
placing the pad.
• Do not pull the pad up too high or pull it
strongly.
CHAIR ASSEMBLY
4

5

6
SERIAL NUMBER LOCATION
Serial number can be found in
the tag on back of the chair.

7

8

9

10

11

12

13

14

15

16

17

18