SVAGO SV-630 User manual

SV-630
STEP 6: : Unzip the zipper to open the rear cover of back pad. Then attach the back portion of
the back pad onto backrest frame. Then zip the zipper.
STEP 7: Attach the pillow onto the head portion of back pad.
All manuals and user guides at all-guides.com

STEP:1 Unpacked, take the chair, back pad, pillow and power adaptor out.
SV-630 Assembly Instructions
STEP 2: Unfold the backrest frame, fix the “L” latch, and attach the rear fabric cover by Velcro.
STEP 4:
STEP 3:
STEP 5:
Power adaptor
“L” latch
Velcro
chair
pillowBack pad
Connect the power adaptor to the chair and insert the power plug to the electrical
socket. Press the foot rise button to lift up the legrest frame. Then attach the
legrest portion of the back pad onto legrest frame.
Pull the air hoses in the back pad through the fabric cover pocket on the seat. Please
align hoses in the back pad at the connectors. Connect to the connectors and the
heat coils, and then zip up.
Pull the back pad to aline the velcro. Then attach the seat portion of the back pad onto
seat frame.
All manuals and user guides at all-guides.com