Sven RX-260W User manual

RX-260W
ENG
USER MANUAL
Congratulations on purchasing
the SVEN mouse!
Please read this User Manual before
using the unit and retain this User’s Ma-
nual in a safe place for future reference.
COPYRIGHT
© SVEN PTE. LTD. Version 1.0 (V 1.0).
This Manual and information contained
in it are copyrighted. All rights
TRADEMARKS
All trademarks are the property of their
legal holders.
NOTICE OF RESPONSIBILITY
RESTRICTION
Despite the exerted eorts to make this
Manual more exact, some discrepancies
may occur. The information in this Man-
ual is given on«as is» terms. The author
and thepublisher do not bear any liabil-
ity toaperson or an organization for loss
ordamage which has arisen from thein-
formation contained in this Manual.
• Shipping and transportation equip-
ment is permitted only in the original
container.
• Does not require special conditions
for realization.
• Dispose of in accordance with regu-
lations for the disposal of household
and computer equipment.
SAFETY PRECAUSIONS
• Protect your mouse from high humi-
dity, dust or high temperatures.
• Do not use gasoline, spirit or other dis-
solvents for cleaning.
This may cause damage to the surface.
Clean the device with soft cloth.
• Do not attempt to disassemble or re-
pair your device.
• Protect the device against powerful
shocks and falls — they may damage
the internal electronics.
APPOINTMENT
RX-260W is an input device. It should
be used for input (entering) information
into the computer and operation on it.
PACKAGE CONTENTS
• Wireless mouse — 1 pc
• 2.4 GHz receiver — 1 pc
• AA battery — 1 pc
• User manual — 1 pc
SPECIAL FEATURES
• Switching DPI modes
• Rubber scroll wheel
• Plug&Play technology
• SYSTEM REQUIREMENTS
• Windows/Mac OS
• Free USB port
CONNECTION AND INSTALLATION
Please insert AA battery to battery tray
in accordance with polarity. Connect
the included receiver to the free USB PC
port. Activation will run automatically.

RX-260W
TROUBLESHOOTING
Problem Solution
The mouse
isnot working.
1. Disconnect the mouse from your PC and check the connector
pins for possible damage. If there is no external damage found
and the connector pins are OK, connect the mouse to your PC
again.
2. Address your nearest authorized service center.
If none of the above mentioned solutions removes the problem, please consult a near-
est authorized service center. Never try to repair the device on your own.
Technical support: www.sven.fi.
0B0124