Swann SW-C-MDNC User manual

Maxi Day/Night Cam
Security Camera
If this device does not work when you first plug it
in, do not take it back to the store.
Contact the Swann Helpdesk using our fast e-mail service
or call us on one of the Toll-Free
numbers shown on the back cover of this booklet.
[email protected]
Most problems can be quickly and easily fixed with a simple
e-mail or a quick chat with one of our friendly technical staff.
(Toll-Free available in the US and Australia only)
Installation Guide
Weatherproof Day & Night Camera
English
Swann Technical Support
All Countries E-mail: [email protected]
UNITED STATES toll free
1-800-627-2799
1-877-274-3695
(Su, 2pm-10pm US PT)
(M-Th, 6am-10pm US PT)
(F 6am-2pm US PT)
USA Exchange & Repairs
562-777-2551
(M-F, 9am-5pm US PT)
AUSTRALIA toll free
1300 138 324
(M 9am-5pm AUS ET)
(Tu-F 1am-5pm AUS ET)
(Sa 1am-9am AUS ET)
New Zealand toll free
0800 479 266
International
[phone]
Telephone Helpdesk
See http://www.worldtimeserver.com for information on different time zones
and the time in Melbourne Australia compare to your local time.
Swann warrants this product against defects in workmanship and material for a
period of one (1) year from it’s original purchase date. You must present your
receipt as proof of date of purchase for warranty validation. Any unit which proves
defective during the stated period will be repaired without charge for parts or
labour or replaced at the sole discretion of Swann. The repair or replacement will
be warranted for either ninety days or the remainder of the original one year
warranty period, whichever is longer. The end user is responsible for all freight
charges incurred to send the to Swann’s repair centres.
shipping from and to any country
other than the country of origin. The warranty does not cover any incidental,
accidental or consequential damages arising from the use of or the inability to use
this . Any costs associated with the fitting or removal of this product by a
tradesman or other person or any other costs associated with its use are the
responsibility of the end user. This warranty applies to the original purchaser of the
only and is not transferrable to any third party.
Unauthorised end user or third party modifications to any component or evidence
of misuse or abuse of the device will render all warranties void.
product The end user is
responsible for all shipping costs incurred when
product
product
Help Desk / Support Details
Warranty Information
www.swannsecurity.com
FCC WARNING
STATEMENT
This device complies
with Part 15 of FCC Rules.
Operation is subject to the
following two conditions:
(1) This device may not
cause harmful interference
and (2) this device must
accept any interference
received, including
interference that may
cause undesired operation
WARNING: IMPORTANT
NOTICE ABOUT CORRECT
USE OF POWER ADAPTER
The correct orientation
for the enclosed power
adapter is in a vertical
or floor mount position.
L’orientation correcte pour
L’adapteur secteur fourni
est dans une position
verticale ou plancher-
monte.
La orientacion correcta para
el adaptador electrico incluido
es en posicion vertical o instalado
en el suelo.
En130808

Introduction
Your package comes with
Connect the Maxi Day/Night Camera to your monitoring device
Installing the Camera Hood
Replacing or Changing the Camera Lens
Tips for Installing Your Camera
Important Information about this product
Tips for using your Swann Security Camera
Technical Specifications
Help Desk / Support Details
Warranty Information
2
2
3
4
4
5
6
6
7
Back Cover
Back Cover
The Maxi Day/Night Camera is a versatile Weatherproof CCD Security camera that includes 24
Infra-Red LEDs that give you the capability of viewing the images produced under most lighting
conditions, even at night. It can be used to provide your home or office with a clear picture that can
be easily displayed on a DVR, TV, VCR or Security Monitor.
The Maxi Day/Night camera is designed for best performance when used with Swann DVRs and
Security Monitors, but will just as easily work with your existing CCTV Equipment, TV, VCR or a
Computer with a video capture card. The camera can be used indoors or outdoors. The Maxi
Day/Night camera can be used for a variety of purposes including monitoring callers at the door or
keeping your car, yard, shop or children’s play area under observation.
INSTALLATION
• Maxi Day/Night Camera with fixed cable and Camera Hood
• Camera Stand
• BNC female to RCA male adapter
• BNC Extension Cable with DC Connection
• Power Adaptor
• Security Stickers
• This Instruction Sheet
If any of these items are missing, please contact your retailer.
Image Sensor:
Picture Element:
Video System*:
Horizontal Resolution:
S/N Ratio:
Minimum Illumination:
Video Output:
Power Supply:
Operating Current:
Video Cable Connector:
Infra-Red LEDs:
Infra-Red LED Wavelength:
Maximum IR Illumination Range:
IR Activation:
Housing Material:
Dimensions:
¼” SuperHAD CCD
PAL - 500 (H) x 582 (V)
NTSC - 510 (H) x 492 (V)
NTSC - USA & CANADA
PAL - AU, UK & EU
420 TV Lines
> 48db
0 Lux (IR LEDs on)
1.0v (P-P) @ 75ohm
12V DC
180mA - 280mA (IR On)
BNC female
24
850nm
66ft (20m)
Automatic from PE Cel
Auto On at Night
Auto Off during Day
Aluminium Alloy
4” (H) x 2¾” (W) x 6¾” (L)
99mm (H) x 71mm (W) x 169mm (L)
*Please note that this camera ships in the appropriate TV/Video system for the country of sale. In
countries using the NTSC TV standard for the camera will be built to the NTSC standard, and in
countries using PAL TV standard, the camera will be built to the PAL standard. The camera cannot
switched from one standard to the other.
Contents Technical Specifications
Introduction
Your package comes with…
2 7
NOTE:
All jurisdictions have specific laws and regulations relating to the use of
cameras. Before using any camera for any purpose, it is the buyer’s
responsibility to be aware of all applicable laws and regulations that
prohibit or limit the use of cameras and to comply with the applicable laws
and regulations.
The legality of watching people other than yourself changes from country
to country and even state to state. Contact your local government's
privacy information body or your local Police for more information on what
if any restrictions you may face.

63
Connect the Maxi Day/Night Camera to your monitoring device
BNC Female
DVR, TV, VCR or MONITOR
OUT
IN
VIDEO
VIDEO
AUDIO
AUDIO
VIDEO IN
DC Jack
DC POWER
CONNECTOR
3c
2a
1b
POWER
ADAPTOR
2
DC Jack
1a
EXTENSION
CABLE
3
BNC Male 3b
BNC Male 3d
DC Plug 3a
These step by step instructions are provided for you to enable a quick and simple installation of
your camera. Please refer to the diagram below for component identification details.
Connect the BNC female connector on the Maxi Day/Night Camera (1b) to the
BNC male connector on the extension cable (3b)
Connect the BNC extension connector (3d) to the back of your DVR or monitoring
device. Note if you are connecting to a TV or VCR use the included BNC female to
RCA male adapter
Connect the DC Jack (1a) to the DC input on the Extension Cable (3a)
Connect the DC Power Connector (2a) on the Power Adapter to the Extension
Cable (3c)
Plug in the Power Adapter (2) to an available power outlet
Turn on your DVR or monitoring device and follow the manufacturers instructions
for viewing images. If you have an with RCA sockets you may need to
switch the to the channel to view the camera. To connect the camera to
your , you will need to turn the to the selection and turn your
onto the channel you would normally use to view a tape or movie on your .
This channel may be activated by a button on your remote that is marked L1 or L2
or possibly AV1 or AV2. Please read the for your or for more
information on using their
Step 1:
Step 2:
Step 3:
Step 4:
Step 5:
A/V TV
TV AV
VCR VCR A/V Input
TV VCR
instructions VCR TV
A/V inputs.
Step 6:
!
!
!
!
!
!
Please test all devices before final installation as it is far easier to rectify problems at this stage.
To avoid the risk of damage to your product, use only the supplied power adaptors.
Areas with a bright background may caused degradation of the image. If possible position
your camera so that it doesn’t point towards a very bright light source.
Do not cut the DC power cable of the Camera to fit with another power source. This
may result in damage to the Camera & any unauthorised modifications will void your
warranty.
Best Results are achieved when the camera is looking down on the subject area.
The hood can be used to stop sunlight entering the lens and causing the picture to wash out
during bright daylight.
1. Deterrence is the best and most cost effective security method for:
- preventing criminal activity before it occurs is preferable to, and cheaper than, cleaning
up after it occurs
- the Swann Maxi Day/Night Camera is an example of cost effective security utilising
the 'art of deterrence' to outsmart thieves and criminals
2. Always place cameras high enough that they can't be closely inspected or easily accessed.
3. Position cameras and dummies where they can be easily seen for maximum deterrence.
4. Position a monitor where it can be seen but not touched.
5. If you have more than one camera use a monitor with channel switching function, a Quad
Processor or DVR with multiple views to show potential offenders the level of coverage you
have protecting your site.
6. Add extra Swann dummy cameras to give the impression of heightened security.
7. Purchase a Swann DVR to monitor and record activity on your cameras. Depending on the
settings used, DVRs can record for months.
8. Position a VCR with tapes or boxes close to your monitor for added effect,
implying there is a security video recorder even if there isn't one.
Important Information about this product
Tips for using your Swann Security camera

1. Doorways
5. Reception
areas
6. Cash
register
7. Mix
dummies
& real
cameras
8. Under eaves
2. Windows 3. Car Parks 4. Verandahs
You should position your cameras to cover the areas most exposed to risk. See
our suggestions below for some ideas:
Where to Place The Security Stickers:
1. On your front window
2. On side windows
3. Near entrance points - doors, gates
4. Next to a dummy camera mounted outside
5. On the front counter
6. On the cash register
7. Next to an obvious camera
5
4
Tips for Installing Your Camera
Installing the Camera Hood
Replacing or Changing the Lens
Installing the Camera Hood
To fit the Camera Hood use a small Philips Head screwdriver to remove the two
screws from the top mounting block. Once these are removed, place the hood on top of the
camera casing with the slots over the screw holes in the casing. Place the mounting block on
top of the hood, then using the screwdriver screw the two screws back into the casing until
the hood is firmly secured.
Replacing or Changing the Lens:
First, make sure the camera hood has been removed, then follow these steps.
(A) Unscrew the front housing of the camera in an anti-clockwise direction
(B) Remove the rubber ring around the camera lens
(C) Carefully remove the LED circuit board from the housing and turn it to one side,
taking care of the wires that go from the underside of the circuit board into the
camera
(D) Unscrew the lens in a counter-clockwise direction and remove it completely
(E) Once the lens is removed, carefully screw the replacement lens (not included) in a
clockwise direction into the lens socket and adjust it for correct focus.
(F) When the focus is correct, refit all of the components you have just removed in
reverse order. Reverse this procedure if you wish to refit the Standard supplied lens.
Note: The Maxi Day/Night Color Camera will automatically change to a black & white image
using the Infra-Red LEDs when available light is too low to support a clear color
picture.