Swann USB EXTERNAL HUB SW-U-4PMH User manual

• Dual-power - self-powered and external-powered
• Plug & play, hot-swappable
• Works with full speed & low speed devices
• Multi-Power: Self-powered or external-powered
• Multi-Port: 4 downstream ports with over-current protection per port
• Multi-Function: Works with both full speed (12mbps) & low speed (1.5mbps) devices
• Multi-Devices: USB protocol allows for connection of up to 127 devices, with true plug
& play and hot-swapping
www.swann.com.au
Enquiries: [email protected]
Product Code: SW-U-4PMH
USB External Hub
Multi Hub
4 Port Powered USB Hub
USB

Multi-connectivity couldn’t be easier
When you want to use several USB devices at once, or you are working on
a Mac or PC, the Swann Multi Hub has four bidirectional ports which allows
easy hot-swapping.
Supporting bus-powered and self-powered USB peripherals (including printers,
scanners, modems, keyboards, mice, joysticks and more), it provides convenient
access to a USB port, instead of the rear panel of your computer.
Multi-connectivity couldn't be easier.
USB External Hub
Multi Hub
4 Port Powered USB Hub
Technical Specifications
Auto-external shut down
Full compliance with USB Spec Rev 1.1
UHCI and OHCI compatible
1.5Mbps/12Mbps transmission rate
Dual-Powered
1 host port, 4 downstream ports
Over-current protection in gang mode, or per port mode
External power adapter DC 6v 2.1A
Dimension & Weight:
160 x 95 x 30mm
200g
Allows connection of up to 127 USB devices:
High Powered Devices: Scanners, Printers
Low Powered Devices: Mice, Keyboards,
Modems, Joysticks, Digital Cameras, Speakers
Minimum Requirements
PC
Microsoft® Windows® 98 or later
A spare USB port
Pentium 200mmx or higher
32MB Ram
MAC
Mac with spare USB port
System 8.6 or higher
32MB Ram minimum
200MHz minimum
www.swannsecurity.com
Please note that the information
contained within this document is
subject to change without notification.