Sweetpea Baby ROSE 3-IN-1 User manual

0222R1-640
Owner’s Manual
ROSE 3-IN-1
Convertible Toddler Bed
Read all instructions before
assembling and using product.
IMPORTANT - Keep instructions for
future use.
Scan the QR code to register your product
https://www.sweetpeababy.com/customer-care/product-registration/

2
SAFE SLEEP TIPS
Adult Assembly
Required.
DO NOT use the
product if it is
damaged, broken,
and/or components are
missing or broken.
To protect your parts
during assembly,
please place them on a
soft surface.
Small parts may
present choking
hazard prior to
assembly.
Please read the
instructions
thoroughly. Identify all
parts & hardware.
Do Not Use Power
Drills or Drivers.
To clean surface, use
only water on a damp
cloth. Do not use
window cleaner or
cleaning abrasive as it
will scratch the surface
and could damage the
protective coating.
For a Safe and
comfortable Sleep
experience, we
suggest using Dream
On Me/Evolur
Greenguard Gold
Certified Crib/Toddler
Mattress.
0-6
www.sweetpeababy.com/help
Contact Sweetpea
Baby in case of any
assistance needed.

3
www.sweetpeababy.com/help
…. for choosing Sweetpea Baby and congratulations on joining our family;
a family that has been transforming lives for over 30 years!
We appreciate your feedback and wish you the very best in the
coming years with your new addition. If you have any questions
or concerns please don’t hesitate to reach out to us. One of our
trusted Customer Care representatives will be happy to assist you.
Thank you again for entrusting us to provide you with safe
and affordable baby products and accessories.
THANK YOU...
LIMITED WARRANTY:
• Sweetpea Baby warrants its product to be free from defects in material
and workmanship and agrees to remedy any such defect.
• This warranty covers 1 year from the date of original purchase.
• This warranty is valid only upon presentation of proof of purchase.
• This is solely limited to the repair or replacement of defective furniture
components and no assembly labor is included.
• This warranty does not apply to any product which has been improperly
assembled, subjected to misuse or abuse or which has been altered or
repaired in any way.
• This warranty gives you specific legal rights and you may also have other
rights which vary from State to State.

4
WARNINGS
• FAILURE TO FOLLOW THESE WARNINGS AND ASSEMBLY INSTRUCTIONS
COULD RESULT IN SERIOUS INJURY OR DEATH.
• CHECK THIS PRODUCT FOR DAMAGED HARDWARE, LOOSE JOINTS, MISSING
PARTS OR SHARP EDGES BEFORE AND AFTER ASSEMBLY AND FREQUENTLY
DURING USE.
• DO NOT USE THIS TODDLER BED IF ANY PARTS ARE MISSING, DAMAGED OR
BROKEN. CONTACT SWEETPEA BABY - 1532 S. WASHINGTON AVE,
PISCATAWAY, NJ 08854 FOR REPLACEMENT PARTS.
• DO NOT USE A WATER MATTRESS WITH THIS TODDLER BED.
• IF REFINISHING, USE A NON-TOXIC FINISH SPECIFIED FOR CHILDREN’S
PRODUCTS.
STRANGULATION HAZARD:
• TO HELP PREVENT STRANGULATION TIGHTEN ALL FASTENERS. A CHILD CAN
TRAP PARTS OF BODY OR CLOTHING ON LOOSE FASTENERS.
• DO NOT PLACE TODDLER BED NEAR WINDOW WHERE CORDS FROM BLINDS
OR DRAPES MAY STRANGLE A CHILD.
• NEVER ADD A PILLOW, COMFORTER OR PADDING.
• NEVER USE PLASTIC SHIPPING BAGS OR ANY PLASTIC FILM AS MATTRESS
COVERS, BECAUSE THEY CAN CAUSE SUFFOCATION.
• TODDLERS CAN SUFFOCATE IN GAPS BETWEEN THE SIDES OF THE TODDLER
BED AND A MATTRESS THAT IS TOO SMALL. ANY MATTRESS USED IN THIS
TODDLER BED MUST BE AT LEAST 27-1/4 IN (69 CM) BY 51-5/8 IN (131 CM), WITH
A THICKNESS NOT EXCEEDING 6 IN (15CM) AND A MINIMUM THICKNESS OF 4 IN
(10 CM). THE DIMENSIONS OF THE MATTRESS SHALL BE TAKEN FROM SEAM TO
SEAM OR EDGE TO EDGE WHERE APPROPRIATE.
FALL HAZARD:
• WHEN STORING A TODDLER BED, USE CAUTION AS EXTREME CHANGES IN
TEMPERATURE OR HUMIDITY CAN COMPROMISE THE TODDLER BED, MAKING IT
EXTREMELY DANGEROUS TO YOUR CHILD.
• USE CAUTION WHEN A VAPORIZER OR HUMIDIFIER IS IN USE. ALWAYS AIM
VAPOR AWAY FROM THE TODDLER BED AS WELL AS ANY OTHER WOODEN
FURNITURE. PROLONGED PERIODS OF HUMIDITY IN STORAGE AS WELL AS IN
THE HOME CAN COMPROMISE THE TODDLER BED.
• AVOID USING VAPORIZERS AND HUMIDIFIERS FOR PROLONGED PERIODS.
www.sweetpeababy.com/help

5
WARNINGS (cont.)
• DO NOT USE THIS TODDLER BED IF YOU CANNOT FOLLOW THE
ACCOMPANYING INSTRUCTIONS.
• DO NOT PLACE IN OR NEAR THIS TODDLER BED ANY CORD, STRAP, OR SIMILAR
ITEM THAT COULD GET WRAPPED AROUND A TODDLER’S NECK.
• DO NOT PLACE THIS TODDLER BED NEAR A WINDOW OR A PATIO DOOR WHERE
THE TODDLER COULD REACH THE CORD OF A BLIND OR CURTAIN AND GET
STRANGLED.
• CHECK THIS TODDLER BED REGULARLY BEFORE USING IT. DO NOT USE IT IF
ANY PARTS ARE LOOSE OR MISSING OR THERE ARE ANY SIGNS OF DAMAGE.
DO NOT SUBSTITUTE PARTS. CONTACT THE MANUFACTURER IF REPLACEMENT
PARTS OR ADDITIONAL INSTRUCTIONS ARE NEEDED.
• USE A CRIB MATTRESS THAT IS NO THICKER THAN 15 CM AND IS OF SUCH A
SIZE THAT, WHEN IT IS PUSHED FIRMLY AGAINST ANY SIDE OF THE TODDLER
BED, IT DOES NOT LEAVE A GAP OF MORE THAN 3 CM BETWEEN THE
MATTRESS AND ANY PART OF THE SIDES OF THE TODDLER BED.
• TODDLERS CAN SUFFOCATE ON SOFT BEDDING. DO NOT PLACE PILLOWS,
COMFORTERS, OR SOFT MATTRESSES IN THIS TODDLER BED.
www.sweetpeababy.com/help

6
PARTS
If there are any missing parts, please contact Sweetpea Baby before using the
product.
www.sweetpeababy.com/help
Left Headboard
Leg
1Right Headboard
Leg
2Headboard Bottom
Rail
3Headboard Top
Rail
4
Left Footboard
Leg
5
Footboard and Headboard
Panels (x2)
9Right Guard Panel (x2) 10 Left Guard Panel (x2) 11
Right Footboard
Leg
6Footboard Bottom
Rail
7Footboard Top
Rail
8

7
PARTS (cont.)
If there are any missing parts, please contact Sweetpea Baby before using the
product.
www.sweetpeababy.com/help
Center Bar (x2)
12
Bed Rail (x6)
15
Center Bed Rail (x2)
13 Bottom Bed Rail (x2) 14

8
HARDWARE
If there are any missing parts, please contact Sweetpea Baby before using the
product.
www.sweetpeababy.com/help
Bolt 2-3/4” (×4)
A
Bolt 1-3/4” (×8)
CBarrel Nuts (x32) DHalf Moon Washer (×4) E
Wooden Dowels
1-1/4” (×4)
FWooden Dowels
1-5/8” (×4)
GAllen Key (x1) H
Bolt 2-1/8” (×28)
B
Screw Driver (NOT INCLUDED)
Tools Needed:

9
www.sweetpeababy.com/help
Bolt 2-3/4” (×2)
ABolt 1-3/4” (×2)
C
Barrel Nuts (x2)
D
Wooden Dowels
1-1/4” (×2)
F
(3)
(A)
(A)
(A)
(C)
(C)
(9)
(4)
(1)
(1)
(3)
(D)
(F)
(2)
1
TODDLER BED ASSEMBLY - HEADBOARD ASSEMBLY
1a. Place the Headboard Panel (9)
on a soft surface and align the
Headboard Top Rail (4) and
the Headboard Bottom rail (3)
as shown in the illustration.
1b. Align Left Headboard Leg (1)
and Right Headboard Leg (2)
to the sides of the Panel.
1c. Attach the Bolts (C) in the
insertions provided on the top
of both legs.
1d. Attach the Barrel Nuts (D) in
the insertions provided on the
bottom rail. Similarly, attach
the Bolts (A) in the insertions
given on the bottom of both
legs.
1e. Tighten the Bolts (C) into the
Barrel Nuts (D) using the Allen
Key (H) provided.
NOTE:
Do not over-tighten the bolts.

10 www.sweetpeababy.com/help
Bolt 2-3/4” (×2)
ABolt 1-3/4” (×2)
C
Barrel Nuts (x2)
D
Wooden Dowels
1-1/4” (×2)
F
(5)
(5)
(6)
(7)
(7)
(8)
(A)
(A)
(A)
(C)
(C)
(9)
(D)
(F)
2
TODDLER BED ASSEMBLY - FOOTBOARD ASSEMBLY
2a. Align the Footboard Top
Rail (8) and the Footboard
Bottom Rail (7) to the
Footboard Panel (9) as
shown in the illustration.
2b. Align Left Footboard Leg (5)
and Right Footboard Leg (6)
to the sides of the Panel.
2c. Attach the Bolts (C) in the
insertions provided on the
top of both legs.
2d. Attach the Barrel Nuts (D) in
the insertions provided on
the bottom rail. Similarly,
attach the Bolts (A) in the
insertions given on the
bottom of both legs.
2e. Tighten the Bolts (C) into
the Barrel Nuts (D) using
the Allen Key (H) provided.

11
www.sweetpeababy.com/help
Bolt 2-1/8” (×3)
BBarrel Nuts (x3)
D
(11)
(11)
(B)
(D)
3
TODDLER BED ASSEMBLY - TOP BED FRAME ASSEMBLY
3a. Align the Left Guard
Panel (11) to the
assembled Headboard
Panel as shown in the
illustration.
3b. Attach the Barrel Nuts
(D) in the insertions
provided on the Left
Guard Panel. Similarly,
attach the Bolt Nuts (B)
in the insertions of the
Headboard as shown in
the illustration.
3c. Tighten the Bolts (B) into
the Barrel Nuts (D) using
the Allen Key (H)
provided.
3d. Repeat the above steps
to attach the Left Guard
Panel (11) to the
assembled Footboard
Panel, putting together
the bottom bed frame.

12 www.sweetpeababy.com/help
Bolt 2-1/8” (×2)
BBarrel Nuts (x2)
D
(11)
(11)
(9)
(D)
(B)
(B)
(14)
(14)
(15)
(15)
(15)
(15)
4
TODDLER BED ASSEMBLY - BED FRAME ASSEMBLY
4a. Attach the Bed Rails (15) in
the insertions provided on
the Left Guard Panel (11).
4b. Attach the Barrel Nuts (D)
in the insertions provided
on the Bottom Bed Rail
(14). Similarly, attach the
Bolt Nuts (B) in the
insertions of the Left
Guard Panel as shown in
the illustration.
4c. Tighten the Bolts (B) into
the Barrel Nuts (D) using
the Allen Key (H) provided
to attach the Bottom Bed
Rail to the Left Guard
Panel.
4d. Repeat the above steps to
assemble the bottom bed
frame.

13
www.sweetpeababy.com/help
Bolt 2-1/8” (×5)
BBarrel Nuts (x5)
D
(10)
(12)
(B)
(D)
(D)
(B)
5
TODDLER BED ASSEMBLY - TOP BED FRAME ASSEMBLY
5a. Align the Right Guard Panel
(10) to the assembled
Headboard Panel as shown
in the illustration.
5b. Attach the Barrel Nuts (D) in
the insertions provided on
the Right Guard Panel and
the Bottom Bed Rail (14).
5c. Attach the Bed Rails (15) in
the insertions provided on
the Right Guard Panel.
5d. Attach the Bolt Nuts (B) in the
insertions of the Headboard
and the Right Guard Panel as
shown in the illustration.
5e. Tighten the Bolts (B) into the
Barrel Nuts (D) using the
Allen Key (H) provided.
5f. Repeat the above steps to
assemble the bottom bed
frame.

14 www.sweetpeababy.com/help
Bolt 2-1/8” (×8)
BBarrel Nuts (x8)
D
(12)
(12)
(13)
(13)
(13)
(D)
(B)
(B)
(12)
6
TODDLER BED ASSEMBLY - CENTER BED FRAME
ASSEMBLY
6a. Align the Center Bar (12) and
the Center Bed Rail (13) as
shown in the illustration.
6b. Attach the Barrel Nuts (D) in
the insertions provided on
the Center Bed Rails.
Similarly, attach the Bolts
(B) in the insertions
provided on the Center bar.
6c. Tighten the Bolts (B) into the
Barrel Nuts (D) using the
Allen Key (H) provided.

15
www.sweetpeababy.com/help
Bolt 1-3/4” (×4)
CSpacer (×4)
E
Wooden Dowels
1-5/8” (×4)
G
(G)
(E)
(C)
7
TODDLER BED ASSEMBLY - BED FRAME ASSEMBLY
7a. Align the Center Frame and
the assembled Top and
Bottom Bed Frames.
7b. Position the Wooden
Dowels (G) between the
insertions of the Center Bed
Frame and Top/Bottom Bed
Frame as shown in the
illustration.
7c. Insert the Bolts (C) into the
Half Moon Washer (E) on all
the ends of the Center Bed
Frame attaching it to the
Top and Bottom Bed Frame.
7c. Tighten the Bolts (C) using
the Allen Key (H) provided.

16 www.sweetpeababy.com/help
1
CONVERSION MODES - KID-SIZED SOFAS
1a. To convert the Toddler Bed to
two Kid-Sized Sofas, you
must first separate the Center
Bed Frame from the Top and
Bottom Bed Frame.
1b. Keep aside the Center Bed
Frame for converting it to a
Table.
NOTE:
*The Bed can be converted
into two Kid-Sized Sofas
without a conversion kit.
“Remove the Center
Bed Frame”

17
www.sweetpeababy.com/help
2
CONVERSION MODES - TABLE
2a. To convert the Toddler Bed to a Table,
use the Center Bed Frame kept aside
from before.
2b. Make sure to follow the complete
instructions provided with the Toddler
Bed Convertible Kit.
NOTE:
*Make sure to use the Dream On Me
Universal 3-in-1 Toddler Bed
Conversion Kit (SKU-649B) to convert
the Toddler Bed to a Center Table
Toddler Bed Conversion Kit (NOT INCLUDED, SOLD SEPARATELY)

18 www.sweetpeababy.com/help
FURNITURE CARE INSTRUCTIONS
ROOM CLIMATE CONTROL:
• Wood, when first cut contains more than 50 percent water. When it is prepared for
furniture construction it is placed in a Kiln and the moisture content is brought down
to 8 to 10 percent. Wood is porous and responds to its environment. If the room has
high humidity it will absorb it and expand and if the humidity is low it will lose
moisture and shrink.
• It is important that the humidity levels in the room be controlled from extremes of
too much humidity or too little. Furniture should not be placed close to the
air-conditioning outlets, fire places, radiators, space heaters, humidifiers or
dehumidifiers. Exposure to extreme variations of temperature and humidity can
damage any fine wood product.
THE IDEAL ENVIRONMENT FOR FINE FURNITURE:
• Fine wood furniture will have fewer problems when its environment is controlled at a
temperature between 65 and 75 degrees and a relative humidity between 35 and 40
percent. Wood placed in an environment outside of those limits can and will shrink
or expand and may develop some small cracks which are not material or structural
defects.
STICKING DOORS AND DRAWERS:
• With the minor changes in temperature and humidity, doors and drawers may swell
and be difficult to open or close. Tolerances have been built into the units but
extreme conditions may still cause sticking. This will adjust back to normal over
time but until it does consider using a dehumidifier or rub candle wax or paraffin on
sides that stick.
AVOID DIRECT SUNLIGHT:
• Keep the furniture out of direct sunlight. Ultraviolet rays will fade colors and in some
cases darken them. It can also cause crazing or hair line cracks in the finish. White
finishes will yellow naturally over time and exposure to direct sunlight will hasten
this natural process along with some woods darkening naturally over time; this is
not considered to be a quality defect.
PROPER STORAGE:
• If you need to put your furniture in storage for any period of time do not store them
in a damp basement or hot dry attic. Allow air movement around the furniture and
do not stack anything on it.

19
www.sweetpeababy.com/help
FURNITURE CARE INSTRUCTIONS (cont.)
• Protect furniture surfaces from hot or extremely cold items.
• Use coasters under hot or cold beverages.
• Do not use synthetic fabric under accessories or lamps.
• Protect tops from pens, markers and crayons.
• Oils from potpourri and other scented items can damage the finish of the furniture.
• Do not drag items across the surface of the furniture.
• Allow the surface to breathe by rotating your accessories and lamps.
• Do not over polish the furniture, do it only two or three times a year. Over polishing
can distort the natural finish of the product.
• Do not wax the furniture, as wax build up can destroy the natural finish of the
product.
• When moving furniture, always lift the unit. Do not push or drag it to avoid damage
to legs.
• Keep the furniture level so doors and drawers open and close freely.
• Clean with a damp, not wet, cloth. Use only a mild soap. Do not use the abrasive
cleaners.
• Do not scratch or chip the finish.
• Inspect the product periodically, contact Sweetpea Baby for replacement parts or
questions.
• Do not store the product or any parts in extreme temperatures and conditions such
as a hot attic or a damp, cold basement. These extremes can cause a loss of
structural integrity.
• To preserve the luster of the high-quality finish on your product, it is recommended
to place a doily or felt pad under any items you place on the finish.
• Clean with a damp cloth, then a dry cloth to preserve the original luster and beauty
of this fine finish. Do not use abrasive chemicals.
• Do not spray cleaners directly onto furniture.
• Lift slightly when moving on carpeting to prevent leg breakage.
• Use of a vaporizer near furniture will cause wood to swell and to peel.
YOU DID IT!
Congratulations Mom & Dad!
It's time to create your dream nursery. A safe, elegant
handcrafted toddler bed that grows with your little one.

1532, S. Washington Avenue
Piscataway, NJ 08854
E-mail: [email protected]
www.sweetpeababy.com
Follow us on
to get your nursery featured on our social media.
@Mysweetpeababy @mysweetpea_baby
Enter our monthly giveaway!
Simply scan the QRcode to register.
Chat with us!
For any questions or concerns or feedback.

