Sweetpea Baby ROSE User manual

Read all instructions before
assembling and using product.
IMPORTANT - Keep Instructions for
future use. 1221R1-6451
Owner’s Manual
ROSE
Cradle
Scan the QR code to register your product
https://www.sweetpeababy.com/customer-care/product-registration/

SAFE SLEEP TIPS
Adult Assembly
Required.
DO NOT use the
product if it is
damaged, broken,
and/or components are
missing or broken.
To protect your parts
during assembly,
please place them on a
soft surface.
Contact Sweetpea
Baby in case of any
assistance needed.
Small parts may
present choking
hazard prior to
assembly.
Please read the
instructions
thoroughly. Identify all
parts & hardware.
Do Not Use Power
Drills or Drivers.
To clean surface, use
only water on a damp
cloth. Do not use
window cleaner or
cleaning abrasive as it
will scratch the surface
and could damage the
protective coating.
0-6
2www.sweetpeababy.com/help

…. for choosing Sweetpea Baby and congratulations on joining our family;
a family that has been transforming lives for 30 years!
We appreciate your feedback and wish you the very best in the
coming years with your new addition. If you have any questions
or concerns please don’t hesitate to reach out to us. One of our
trusted Customer Care representatives will be happy to assist you.
Thank you again for entrusting us to provide you with safe
and affordable baby products and accessories.
THANK YOU...
LIMITED WARRANTY:
• Sweetpea Baby warrants its product to be free from defects in material
and workmanship and agrees to remedy any such defect.
• This warranty covers 1 year from the date of original purchase.
• This warranty is valid only upon presentation of proof of purchase.
• This is solely limited to the repair or replacement of defective furniture
components and no assembly labor is included.
• This warranty does not apply to any product which has been improperly
assembled, subjected to misuse or abuse or which has been altered or
repaired in any way.
• This warranty gives you specific legal rights and you may also have other
rights which vary from State to State.
www.sweetpeababy.com/help
3

WARNINGS
www.sweetpeababy.com/help
4
• FAILURE TO FOLLOW THESE WARNINGS AND ASSEMBLY INSTRUCTIONS COULD RESULT IN
SERIOUS INJURY OR DEATH.
• TO REDUCE THE RISK OF SIDS, PEDIATRICIANS RECOMMEND HEALTHY INFANTS BE PLACED ON
THEIR BACKS TO SLEEP, UNLESS OTHERWISE ADVISED BY YOUR PHYSICIAN.
• CHECK THIS PRODUCT FOR DAMAGED HARDWARE, LOOSE JOINTS, MISSING PARTS OR SHARP
EDGES BEFORE AND AFTER ASSEMBLY AND FREQUENTLY DURING USE.
• DO NOT USE THIS CRADLE IF ANY PARTS ARE MISSING, DAMAGED OR BROKEN. CONTACT
SWEETPEA BABY - 1532 S. WASHINGTON AVE, PISCATAWAY, NJ 08854 FOR REPLACEMENT
PARTS.
• DO NOT USE A WATER MATTRESS WITH THIS CRADLE.
• IF REFINISHING, USE A NON-TOXIC FINISH SPECIFIED FOR CHILDREN’S PRODUCTS.
STRANGULATION HAZARD:
• STRINGS CAUSE STRANGULATION! DO NOT PLACE ITEMS WITH A STRING AROUND A CHILD’S
NECK, SUCH AS HOOD STRINGS OR PACIFIER CORDS. DO NOT SUSPEND STRINGS OVER A
CRADLE OR ATTACH STRINGS TO TOYS.
• TO HELP PREVENT STRANGULATION TIGHTEN ALL FASTENERS. A CHILD CAN TRAP PARTS OF
BODY OR CLOTHING ON LOOSE FASTENERS.
• DO NOT PLACE CRADLE NEAR WINDOW WHERE CORDS FROM BLINDS OR DRAPES MAY
STRANGLE A CHILD.
• INFANTS CAN SUFFOCATE ON SOFT BEDDING.
• NEVER ADD A PILLOW, COMFORTER OR PADDING.
• NEVER PLACE ADDITIONAL PADDING UNDER INFANT.
• NEVER USE PLASTIC SHIPPING BAGS OR ANY PLASTIC FILM AS MATTRESS COVERS, BECAUSE
THEY CAN CAUSE SUFFOCATION.
• INFANTS CAN SUFFOCATE IN GAPS BETWEEN AN EXTRA PAD AND SIDE OF THE
BASSINET/CRADLE, AND ON SOFT BEDDING. NEVER ADD A MATTRESS, PILLOW, COMFORTER,
OR PADDING. USE ONLY THE PAD PROVIDED BY THE MANUFACTURER.
• IF A SHEET IS USED WITH THE PAD, USE ONLY THE ONE PROVIDED BY THE BASSINET OR
CRADLE MANUFACTURER OR ONE SPECIFICALLY DESIGNED TO FIT THE DIMENSION OF THE
BASSINET OR CRADLE MATTRESS. TO REDUCE THE RISK OF SIDS, PEDIATRICIANS RECOMMEND
HEALTHY INFANTS BE PLACED ON THEIR BACKS TO SLEEP, UNLESS OTHERWISE ADVISED BY
YOUR PHYSICIAN.
FALL HAZARD:
• WHEN CHILD IS ABLE TO PULL TO STANDING POSITION, SET MATTRESS TO LOWEST POSITION
AND REMOVE BUMPER PADS, LARGE TOYS AND OTHER OBJECTS THAT COULD SERVE AS
STEPS FOR CLIMBING OUT. AFTER RAISING SIDE, MAKE SURE LATCHES ARE SECURE
(DISREGARD FOR NON-DROP SIDE CRADLE).
• DO NOT LEAVE CHILD IN CRADLE WITH SIDES LOWERED. BE SURE SIDE IS IN RAISED AND
LOCKED POSITION WHENEVER CHILD IS IN CRADLE (DISREGARD FOR NON-DROP SIDE CRADLE).
• TO HELP PREVENT FALLS, DO NOT USE THIS PRODUCT WHEN THE INFANT BEGINS TO PUSH UP
ON HANDS AND KNEES OR HAS REACHED 15 LBS, WHICHEVER COMES FIRST.
• WHEN STORING CRADLE USE CAUTION AS EXTREME CHANGES IN TEMPERATURE OR HUMIDITY
CAN COMPROMISE THE CRADLE MAKING IT EXTREMELY DANGEROUS TO YOUR CHILD.
• USE CAUTION WHEN A VAPORIZER OR HUMIDIFIER IS IN USE. ALWAYS AIM VAPOR AWAY FROM
THE CRADLE AS WELL AS ANY OTHER WOODEN FURNITURE. PROLONGED PERIODS OF
HUMIDITY IN STORAGE AS WELL AS IN THE HOME CAN COMPROMISE THE CRADLE.
• AVOID USING VAPORIZERS AND HUMIDIFIERS FOR PROLONGED PERIODS OF TIME.
• FOLLOW DUCTS IN CRADLE.

www.sweetpeababy.com/help
5
WARNINGS (cont.)
• Do not use this cradle if you cannot exactly follow the accompanying instructions.
• Do not use this cradle for a child who can climb out of it or who is taller than 90
cm.
• Do not place in or near this cradle any cord, strap or similar item that could
become wrapped around a child’s neck.
• Do not place this cradle near a window or a patio door where the child could
reach the cord of a blind or curtain and be strangled.
• Check this cradle regularly before using it and do not use it if any parts are loose
or missing or if there are any signs of damage. Do not substitute parts. Contact
the manufacturer if replacement parts or additional instructions are needed.
• Use a cradle mattress that is no thicker than 15 cm and is of such a size that,
when it is pushed firmly against any side of cradle, it does not leave a gap of
more than 3 cm between the mattress and any part of the sides of the cradle.
• Children can suffocate on soft bedding. Do not place pillows, comforters or soft
mattress in this cradle.
WARNING
• Ne pas utiliser le lit a moins d’ ètre en mesure de suivre précisément les
instructions qui l’ accompagnent.
• Ne pas uliliser le lit si l’ enfant est capable d’ en sortir on mesure plus de 90 cm.
• Ne pas mettre dans le lit on à proximité de celui-ci des cordes, courroies on
objects semblables qui risqueraient de s’enrouler autour du cou de l’ enfant.
• Ne pas placer le lit près d’ une fenètre on d’ une porte-fenètre on l’ enfant
pourrait se saisir de codes d’ un store ou d’ un rideau et s’ etrangler.
• Vérifier régulièrement le lit préabablement à son utilisations et ne pas l’ utiliser en
cas de détection d’ une pièce desserrée, de pièce manquante ou de tout signe
de dommages. Ne pas substituer une pièce a une autre. Communiquer avec le
fabricant pour obtenir, au besoin, une pièce de rechange ou des instructions
supplémentaires.
• Utiliser un matelas pour lit d’ enfant dont l’ épaisseur est d’ au plus 15 cm et
dont la superficie perment d’ empêcher, lorsqu’il est poussé fermement contre
un côté quelconque du lit, qu’un espace de plus de 3 cm soit créé entre le
matelas et une partie quelconque de tout côté.
• L’ enfant peut s’ étouffer en présence d’ articles de literie mous. Ne pas mettre
dans le lit d’ oreiller, d’ édredon ou de matelas mou.
MISE EN GARDE

PARTS
www.sweetpeababy.com/help
6
If there are any missing parts, please contact Sweetpea Baby before using the
product.
Headboards (x2)
1 2 Side Rails (x2)
Mattress Support Panel
3 4 Mattress Pad

HARDWARE
www.sweetpeababy.com/help
7
If there are any missing parts, please contact Sweetpea Baby before using the
product.
Bolt 1-3/4” (×8)
ABolt 1-3/16” (×2) B
Screw (x2)
CAllen Key D
Cradle Lock (x2)
EPlastic Washers (×2) F
Philips Screw Driver (NOT INCLUDED)
Tools Needed:

CRADLE ASSEMBLY - SIDE RAILS ASSEMBLY
www.sweetpeababy.com/help
8
Bolt 1-3/4” (×8)
A
(1)
(1)
(1)
(2)
(2)
(2)
(A)
1
1a. Align the Side Rails (2) in
between two Headboards(1)
as shown in the diagram.
1b. Locate the holes on the
Side Rails (2) and
Headboards, insert the
Bolts (A) on all the four
corners from inside the Side
Rails.
1c. Tighten all the bolts using
Allen Key (D) provided.

www.sweetpeababy.com/help
9
Screw (x2)
C
(C)
(3)
(3)
CRADLE ASSEMBLY- MATTRESS SUPPORT PANEL
ASSEMBLY
2
2a. Place the Wooden Mattress
Support Panel (3) in between the
previously assembled Side Rails.
Refer to the diagram shown.
2b. Locate the holes at the center of
the Wooden Support Panel (3)
on both sides, insert the Screw
(C) and tighten it with Philips
Screwdriver (Not included in the
box).

www.sweetpeababy.com/help
10
Bolt 1-3/16” (×2)
B
Plastic Washers (×2)
F
(B)
(E)
(F)
(4)
CRADLE ASSEMBLY - CRADLE LOCK ASSEMBLY
AND MATTRESS PAD PLACEMENT
3
3a. To attach the Cradle Lock (E) to the
cradle, locate the hole on the legs of
the Headboards (1). Place the Plastic
Washer (F) on it, align the Cradle
Lock (E) and Insert the Bolt (B) into
both. Tighten the Bolt (B) with a
Phillips ScrewDriver (Not Included in
the box). Follow the same on the
diagonally opposite side of the Foot
of the Headboard.
3b. Make sure the Cradle Lock is facing
downwards as shown in the diagram
to ensure proper cradling/rocking
movements.
3b. Place the Mattress Pad (4) on the
Wooden Mattress Support Panel.

www.sweetpeababy.com/help
11
CONVERSION MODE - BASSINET MODE
1
1a. To use the Cradle as a
Bassinet, simply turn the
Cradle Lock upwards as
depicted in the diagram.
1b. Follow the above step for
both the Cradle Locks.

www.sweetpeababy.com/help
12
CRADLE CARE INSTRUCTIONS
ROOM CLIMATE CONTROL:
• Wood, when first cut contains more than 50 percent water. When it is prepared for
furniture construction it is placed in a Kiln and the moisture content is brought down
to 8 to 10 percent. Wood is porous and responds to its environment. If the room has
high humidity it will absorb it and expand and if the humidity is low it will lose
moisture and shrink.
• It is important that the humidity levels in the room be controlled from extremes of
too much humidity or too little. Furniture should not be placed close to the
air-conditioning outlets, fire places, radiators, space heaters, humidifiers or
dehumidifiers. Exposure to extreme variations of temperature and humidity can
damage any fine wood product.
THE IDEAL ENVIRONMENT FOR FINE FURNITURE:
• Fine wood furniture will have fewer problems when its environment is controlled at a
temperature between 65 and 75 degrees and a relative humidity between 35 and 40
percent. Wood placed in an environment outside of those limits can and will shrink
or expand and may develop some small cracks which are not material or structural
defects.
STICKING DOORS AND DRAWERS:
• With the minor changes in temperature and humidity, doors and drawers may swell
and be difficult to open or close. Tolerances have been built into the units but
extreme conditions may still cause sticking. This will adjust back to normal over
time but until it does consider using a dehumidifier or rub candle wax or paraffin on
sides that stick.
AVOID DIRECT SUNLIGHT:
• Keep the furniture out of direct sunlight. Ultraviolet rays will fade colors and in some
cases darken them. It can also cause crazing or hair line cracks in the finish. White
finishes will yellow naturally over time and exposure to direct sunlight will hasten
this natural process along with some woods darkening naturally over time; this is
not considered to be a quality defect.
PROPER STORAGE:
• If you need to put your furniture in storage for any period of time do not store them
in a damp basement or hot dry attic. Allow air movement around the furniture and
do not stack anything on it.

www.sweetpeababy.com/help
13
CRADLE CARE INSTRUCTIONS (cont.)
IN GENERAL:
• Protect furniture surface from hot or extremely cold items.
• Use coasters under hot or cold beverages.
• Do not use synthetic fabric under accessories or lamps.
• Protect tops from pens, markers and crayons.
• Oils from potpourri and other scented items can damage the finish of the furniture.
• Do not drag items across the surface of the furniture.
• Allow the surface to breath by rotating your accessories and lamps.
• Do not over polish the furniture, do it only two or three times a year. Over polishing
can distort the natural finish of the product.
• Do not wax the furniture, as wax build up can destroy natural finish of the product.
• When moving furniture always lift the unit. Do not push or drag it to avoid damage
to legs.
• Keep the furniture level so doors and drawers open and close freely.
• Clean with a damp, not wet, cloth. Use only a mild soap. Do not use the abrasive
cleaners.
• Do not scratch or chip the finish.
• Inspect the product periodically, contact Sweetpea Baby Inc for replacement parts
or questions.
• Do not store the product or any parts in extreme temperatures and conditions such
as a hot attic or a damp, cold basement. These extremes can cause a loss of
structural integrity.
• To preserve the luster of the high-quality finish on your product, it is recommended
to place a doily or felt pad under any items you place on the finish.
• Clean with a damp cloth, then a dry cloth to preserve the original luster and beauty
of this fine finish.
• Do not use abrasive chemicals.
• Do not spray cleaners directly onto furniture.
• Lift slightly when moving on carpeting to prevent leg breakage.
• Use of a vaporizer near furniture will cause wood to swell and to peel.
YOU DID IT!
Congratulations Mom & Dad!
It's time to create your dream nursery. A safe, elegant
handcrafted cradle that grows with your little one.

1532, S. Washington Avenue
Piscataway, NJ 08854
E-mail: [email protected]
www.sweetpeababy.com
Follow us on
to get your nursery featured on our social media.
@Mysweetpeababy @mysweetpea_baby
Enter our monthly giveaway!
Simply scan the QRcode to register.
Chat with us!
For any questions or concerns or feedback.