Swiss Fluid SSV-B Series User manual

PRODUCT MANUAL PM
SSV-B: Product Info
82 Inline Sampling Ball Valves PM 82 M.00 e
January 2007
Swissfluid AG, Industriestrasse 40, CH-5600 Lenzburg/Switzerland
[email protected]
Inline Sampling Ball Valves SSV-B Series
for safe and representative sampling of aggressive or even toxic liquids from pressurized pipelines or vessels,
without any process interruptions.
Modular Design
Inline Sampling Ball Valves SSV-B Series are available as DIN- or ANSI-valves, with standard handlever for
90° operation. The valves are distinguished by its dead-space-free design as well as the extremely short
outlet way for the representative sample.
The sturdy bodies are made of stainless steel casting 1.4408 (CF-8M) or optional with resistant linings such
as PFA or PFA-AS (anti-static).
Hauptmerkmale
• Full-port design, no pressure drop
• Only one opening to the atmosphere
• Easy and safe operation handlever, optionally
with pneum. quarter turn actuator
• One-piece ball/shaft, PFA-encapsulated,
for defined sampling volume of approx. 45 ml
• All-purpose valve unit – installation on large size
pipelines, vessels etc.
• Sizes DN15 - 80 PN16, ½" - 3"-150lbs
• Face to face acc. to EN 558-1, range 1
Conformity acc. to European
Pressure Equipment Directive 97/23/EC (PED)
Standard Options / Accessories
Valve with bare shaft with handlever 180°and
spring-loaded protection tube
• Bodies with heating jacket
• Bottle support, adjustable
• Flange plate for 180° operation
• Safety cabinet with inspection windows
• Flanges with groove, PN40, ANSI 300lbs etc.
• Safety padlock
• Activated carbon filter
• Vertical adapter
• Metal safety basket

PRODUCT MANUAL PM
SSV-B: Technical Data, Construction
82 Inline Sampling Ball Valves PM 82 M.01 e
January 2007
Swissfluid AG, Industriestrasse 40, CH-5600 Lenzburg/Switzerland
[email protected]
Operating Conditions
• Temperature range from –40°C up to +200°C (depending on selected materials)
• Line pressure max. 16 bar
Testing / Marking
• Pressure- and tightness testing acc. to EN 12266-1, leakage rate A, and spark testing at 35 kV
to assure lining integrity. Marking of valves on body and name plate acc. to EN 19.
• Material- resp. test certificate acc. to EN 10204-3.1
Construction of Valve
Technical Data Dimensions in mm (Kv = Cv / 1.16)
DN A
DIN
A
ANSI
B
DIN
B
ANSI C Cv m3/h Nm** Kg*
15/½" 95 95 160 160 119 14 35 5.3
20/¾" 98 98 160 160 125 25 35 6.3
25/1" 115 108 160 165 125 58 35 6.8
40/1½" 150 127 200 165 132 145 35 8.9
50/2" 165 152 230 178 137 230 35 10.6
80/3" 200 190 310 203 151 620 35 16.0
F/F acc. to DIN EN 558-1 range 1 resp. range 3 and ASME B16.10
* Weights (estim. values, without bottle) ** Break-away torque without safety factor for pneum. quarter turn actuators
Bottle adapter made of
PTFE glassfibre-reinforced,
with PVDF vent connection
Sampling bottle
acc. to DIN 168-1
Valve block made of ss casting
1.4408 (CF-8M), valve seat of
PTFE and PFA-encapsul. ball
(core made of Duplex 1.4462)
270
Handle position 1:
taking sample from
process system
Volume/operation
approx. 45 ml
Position 2:
sampling into bottle
23
Bare Shaft
ISO flange F07
Ø14/
DD11
V
ent

PRODUCT MANUAL PM
SSV-B: Function
82 Inline Sampling Ball Valves PM 82 M.02 e
March 2006
Swissfluid AG, Hirtenweg 6, CH-5102 Rupperswil
Tel. [phone] Fax [phone] [email protected]
Operating Principle SSV-B Series (Sampling under pressure, with bottle)
Valve in closed position
The valve is installed into a horizontal pipeline. The
process line still provides full passage and allows easy
cleaning at any time.
In closed valve position, the handlever is in its initial
vertical position, assured by a mechanical stop.
In order to prevent any unauthorized operation, the
lever can be equipped with a safety padlock.
Valve in opened position for sampling
Liquid product flows through the process system. For
taking out a sample, handlever is rotated counter-
clockwise, i.e. 90° (opt. 180°) towards the mechanical
stop.
Thus, the entire volume of the sampling ball is being
filled with product.
After a few seconds, lever is rotated 90° downwards
into its initial position. Trapped media is moved down-
wards in order to flow into the lab bottle as a repre-
sentative sample.
Depending on the required volume, sampling proce-
dure has to be repeated accordingly.
Applications
The SSV-B Inline Sampling Ball Valve is ideally suited when viscous or even solids-containing media has to
be handled.

PRODUCT MANUAL PM
SSV-B: Parts List Valve compl., manual
82 Inline Sampling Ball Valves, plastomer-lined PM 82 M.05 e
February 2007
Swissfluid AG, Industriestrasse 40, CH-5600 Lenzburg/Switzerland
[email protected]
Standard Version (Picture showing DN 50 PN16, Stainless Steel PFA/PTFE-lined, with handlever)
Item Qty. Description R Materials No.
Stainless Steel lined
1 1 Body DN50 PN16 1.4408 CF-8M PFA 1.4408
2 2 Ball Seat • PTFE
3 1 Valve Unit with Handlever CF-8M/PTFE PFA 1.4408
4 1 Ball Outlet PTFE-R
5 1 Spacer SS316L 1.4404
6 1 Bottle Adapter with O-Ring and Vent Connection • PTFE-R/PVDF
7 2 Fixing Clamp with Wing Nut SS316L 1.4404
8 1 Name Plate 42x14 CE A2 1.4301
9 4 Socket Head Cap Screw M10x80 A2-70 1.4310
10 2 Lock Washer M10 A2 1.4310
11 2 Hammer Screw 2.49x4.76 A2 1.4310
R= Spare Parts • = recommended • =optional
1
5
2
3
8,11
7
9,10
2
4
6