Swiss Madison SM-WC426 User manual

®
Swiss Madison
®
INSTALLATION
INSTRUCTIONS
Wall-Hung Concealed Tank System
SM-WC426
www.swissmadison.com | 1-434-623-4766 | [email protected]
Share your pictures for a feature
using #SwissMadison

—1 —
Prior to Installation:
If you have any questions or concerns please contact us:
· Read instructions thoroughly.
· Remove existing toilet.
· Be sure to properly bleed all air from the piping system, trapped air can cause damage to the
flushing system and toilet bowl.
· We recommend a professional contractor. Customer is responsible for any damage that
may occur during installation.
· Additional floor and wall preparations may be necessary to avoid damage to the product
1-434-623-4766
[email protected]
General Recommendations: Read installation and maintenance instructions thoroughly before installation.
Be sure to use proper tools and always wear proper personal safety accessories for your protection.
· Observe all local plumbing codes.
· Swiss Madison recommends using a cement board or tile backer board for the walboard backing,
avoid gypsum board as it may compromise the load strength of the toilet installation.

Thank you for purchasing a Swiss Madison Concealed Tank System.
We appreciate your business and know you will enjoy your product for many years to come.
If you have any questions or require assistance we would be happy to help,
please contact us at 1-434-6234766 or [email protected].
Thank you for your purchase!
www.swissmadison.com
To learn more about our products, please visit:
Sincerely,
The Swiss Madison Team
—2 —

—3 —
SUGGESTED TOOLS AND MATERIALS
Wrench Plumbers Grease Hacksaw Flat File Drill LevelTape MeasurePencilSafety Goggles
0
NPT

19

12



2

0

～
7

5

～
3
47 
1
1
39

4

5 /

6

7
～
The step-by-step guidelines in the installation instructions are a general reference for installing a Swiss Madison Concealed Tank System.
Should there be any discrepancies, Swiss Madison cannot be held liable.
It is recommended to install all Swiss Madison products by hiring a licensed professional
CONCEALED TANK SYSTEM ROUGH DIMENSIONS
1. Read the complete instruction manual before beginning installation.
2. Confirm that your model will fit in intended location and plumbing fixtures are located
where legally required before beginning installation.
3. Not all drawings on this manual are drawn to scale. Please refer to the model chart.
4. Two people are recommended to install and move this product.
NOTE: Specialized tools may be necessary to install a Swiss Madison Concealed Tank.

—4 —
1. Attach Legs
· Attach legs to framing
· Adjust bowl height as desired.
Loose Parts:
SM-CPT61 Discharge pipe 2x6
SM-CPT62 Pipes inlet/outlet 2x6
SM-CPT64 4 Pcs bolts 2x6
SM-CPT66 Mounting box 2x6
SM-CPT68 Thread bolt 2x6
SM-CPT51 Actuator plastic pins
51
2
3
4
7
12
15
26
6
89
10
11
13 14
16
17
18
19
20 21
22
23
24
25
27
28
29
30
31
32
12 11
10
33
34
35 37
38
39
40
41
36
19
⁄” x 1⁄”
min.5
CONCEALED TANK SYSTEM INSTALLATION INSTRUCTIONS