Switch-Ed DOO-ZY User manual

doo-zy.co.uk
User
TM
Pat Pending 1016779-9
doo·zy/ˈdoozē/ - Noun: Something outstanding or unique of its kind
Register your Doozy at
Copyright Switch-Ed 2011
Doo-zy manual Ver 1A

Index
List of contents
Introduction
Unique features
Doo-zy tour
How it works
Batteries and charging
Select Button
Programs and functions
Select button and function menu
LOC - Special function
Helpful information
Turning On and Off
Record sound and playback with inbuilt mic
Volume control
Switch output programs
Eye function
Vibration function
Display function
Switch pad illumination function
Record with MP3 player or external microphone
Infrared remote control learner
Wireless infrared function
Default and reset function
1
2
3
4
5
6
7
7
8
9
9
10
10
11
11
12
12
13
13
14
15
16
16
Hello!
The Doo-zy
is easy to use. This
manual will guide
you through.
Introduction
Using Doo-zy
Quick Start
Jump to page 10

© 2011 Switch-ed Pat Pending 1016779.9
How programs affect the output
Direct output
Timed output
Latch output
Sequence output
Opposite output
Timed Out output
Positioning your switch
Fitting low prole pad
Graphic card slot
Cradle switch bracket
Cradle for table top
Mounting point for adjustable arm
Replacing the batteries and charging
Technical specication
Factory defaults
Trouble shooting & hard reset
Compliance and legals
Consumer Warranty
17
18
19
20
21
23
24
25
25
26
26
27
27
28
29
29
30
31
32
Switch Output & Programs
Attachments & Mounting
Technical
Warnings
Doo-zy should always be used under
supervision and especially with children and
users with special needs!
Doo-zy is designed for use indoors only and
must not be used in wet and humid areas.
!

1
List of Contents
Thank you for purchasing the Switch-Ed Doo-zy. Please check the contents of the
package and ensure you have all the parts listed below. Your switch comes with a one
year warranty from date of purchase. A copy of our guarantee and warranty is listed at
the rear of this booklet.
This manual is designed using lots of friendly graphics and symbols to help you learn
how to understand and operate the switch as quickly as possible. We suggest you have
the switch next to you together with this manual and work through whilst quickly cross
referencing when required.
Doo-zy Quick Start guide
3-5 mm jack adaptor
Graphics card Carry bag
Low prole clip
Lead
User Manual
Cradle bracket
Power supply charger
Quick Start Guide
1x 1x
1x
1x
1x
1x
10x 1x 1x

2
What is the Doo-zy Switch?
Doo-zy Switch is a unique device designed for people with a wide range of special
needs. It is a recordable switching communicator that can be used as a standalone
device or with toys or assistive technology control systems such as automatic doors and
curtain openers.
Doo-zy Switch combines a number of devices already available in the market place and
builds them in to one package along with some very unique features.
The case is robust and constructed from extremely strong glass lled ABS plastic.
It uses micro electronics and is virtually a small computer using rmware developed
exclusively by Switch Ed.
Doo-zy is extremely exible and easy to use.
Doo-zy can be used as a :-
-Recordable Talking Switch
-Step communicator
-Infrared universal remote control
-Infrared transmitter
-Music player
-Magic Eye switch
-Count up, count down switch
with counting display
-Switch controller for toys with built in
direct/momentary, latch, opposite,
timed, timed off and sequence programs.
External devices and toys
Doo-zy allows you to connect an external switch tted with a 3.5 mm jack plug so
functions and programs can be used with a favourite switch.
A reward device such as a toy can also be connected using a 3.5 mm jack lead.
We can also program the Doo-zy as a simple universal remote control. It can be trained
to control infrared devices such as toys or even your television.
Introduction
Wow!
8 features
in 1

3
Unique Features
Its unique features includes a superior audio sound quality of 12 khz. This is
immediately evident when recordings are played back. An on board micro SD memory
card is capable of storing hours of recorded sound. Record with the in built microphone
or record your favourite music from any audio source including MP3 players.
A transparent switch pad with a graphics card slot allows you to make your own
symbols and graphics quickly and easily. An added bonus is that it illuminates
making it a great visual reference point.
An on board Magic Eye uses infrared technology that detects human heat which allows
users to operate the switch without touching the switch pad. In other words an invisible
beam with two ranges short and long.
A vibration device gives vibratory and tactile feedback when the switch pad is pressed.
Program and function menus are selected using easy to use up, down and select
buttons. The LED bright 7 segment display shows which program or functions are
running at any one time.
All functions are also de-selectable and can be switched off if they are a distraction to
users.
On board infrared receivers and transmitters allow Doo-zy to learn infrared codes from
household equipment such as TVs . This effectively turns Doo-zy into a remote control
to operate a wide range of equipment. Optional IR receiver gives wire free operation with
non infrared equipment if required.
The use of surface low power micro technology allows the rechargeable batteries to
last for a long period of time whilst an overnight charge completely replenishes the
batteries. Doo-zy will run for weeks in standby mode.
Recording with an MP3 player

4
Doozy Tour
Rear view
Front view LED
program
display Magic
Eye
Mic
Illuminated
switch
pad
Infrared
Transmitter
Infrared
Receiver
Line/Mic in
socket
Power
Supply
Socket
Switch
Input
Switch
Output
Playback
record
LED
Graphic
card slot
The select is the most
important thing to
remember! This also
doubles as the on and
off button.
Press scroll up or scroll down to select a sub-menu

5
Doo-zy & how it works
Microprocessor
CPU
The Brain
OutputsInputs
Microphone
MP3/Line in
Infrared Receiver
Speaker
Relay
Switch Pad
Switch
Output
Switch Input
Magic Eye
Infrared
Transmitter
Doo-zy uses micro technology to operate external devices but how the switch pad
reacts and interacts with the users and devices depends on how the built in programs
and functions are set.
Below is a schematic that may make it a little easier to understand.

6
Batteries & charging
Doo-zy is supplied tted with a special rechargeable battery pack. An operation time of
around 6.5 hours constant use should be possible depending which features are being
used. If, for example the vibration is used constantly this would reduce battery
operation time. Doo-zy has an on board low power battery indicator, when Bat is
shown in the display they need recharging.
Battery Life
We suggest that batteries should only be charged when the Bat indicator is displayed
and then fully charged for 5-6 hour period. This will ensure maximum battery longevity
and should be good for around 500-800 charges. When displays constantly it is
time to replace batteries.
Battery Replacement – See page 28.
Charging
Doo-zy is supplied with a world wide power supply charger. It can be used with a range
of voltages from 110-240V. A range of four plugs are supplied for different areas of the
world. USA/North America, Europe, UK and Australia.
Choose the correct adapter for your country and simply slide on the power supply until a
click can be heard. To remove push the indicated pressure point and remove
We suggest a full charge of at least 5 hours when you rst unpack your Doo-zy.
Insert the small plug on the power supply into the rear of the Doo-zy marked with this
symbol and plug into the mains power supply.
When the battery is charging a ashing decimal point indicates it is receiving power from
the charger. This is a good way to check the power supply is working correctly. This only
ashes when Doo-zy is turned on.
Note: Under no circumstances use any other charger, permanent damage
may occur.
USA, Europe, UK & Australia Power
Supply adapters Slide until you hear a click

7
Select button
Switch Output Programs and functions
The Doo-zy uses internal pre-set programs to make the switch output perform complex
or simple tasks that involve the recorded sound.
More information on the switch output programs on page 17.
Doo-zy has a range of features called functions that can be enabled or disabled. Some
functions could be distracting to some users. A good example may be the vibration and
LED display. All can be disabled in the menus.
More information on function page 8.
Vibration & LIT function on. Vibration & LIT function off.
The select button is the most important button to remember as it allows access to
almost all of the functions and sub menus of Doo-zy!
When using the select button the LED display will inform you which menu you are in.
LED display