SwitchBot SMS-EN-2208 User manual

文件名称: Motion Sensor-SMS-EN-2208
材质和工艺：
封面 157g铜板
内页 128g铜版纸，骑马钉
版本号: V1.2-2208
设计师：WQY
成品尺寸：60mm X 80mm
完成时间：2022/08/04
更改内容：1.更新内容文案 2.修改线框图颜色 3.增加IC警语
备注：
此页从虚线下开始印刷，表格不印刷

www.switch-bot.com
V1.2-2208
User Manual
Please read this user manual carefully before
using your device.

1. Package Contents
2. List of Components
3. Preparation
4. Getting Started
5. Safety Information
6. Detection Range
7. Light Sensor
8. How to Use
9. Battery Replacement, Firmware
Upgrades and Resetting Factory Settings
10. Troubleshooting
11. Specifications
12. Warranty
13. Contact & Support
01
02
04
05
06
07
08
08
13
15
17
18
20
Contents

0201
Package Contents List of Components
Motion Sensor × 1
AAA Battery
× 2
Base × 1
User Manual × 1
3M Double-sided
Adhesive Tape × 1
Mounting Slot
Mounting Slot
Battery Case

0403
Preparation
Reset Button
LED Indicator Light
& Light Sensor
Fresnel Lens
Base
Magnet
You will need:
•A smartphone or tablet using Bluetooth
4.2 or later.
•The latest version of our app, downloadable
via the Apple App Store or Google Play
Store.
•A SwitchBot account, you can register via
our app or sign in to your account directly
if you already have one.
Please note: If you intend to use the Cloud
Service feature, you will need a SwitchBot
Hub Mini (sold separately).
iOS 11.0+ Android OS 5.0+

06
05
Getting Started Safety Information
•Keep the device away from humid or hot
environments.
•Remove the batteries when not used for a
long period of time.
•Do not attempt to disassemble, repair, or
modify the device.
•Use only the type of batteries specified in
this manual.
Tap " + " icon at the top right of the home
page. Find the Motion Sensor icon and
select, then follow the instructions to
complete the setup.
Open the battery cover, insert two AAA
batteries following the " + " and " - "
signs. Then close the battery cover and
press it down until it clicks into place.
Open the SwitchBot app and sign in.
1
2
3

08
07
Reset Button Facing Up
Detection Range Light Sensor
How to Use
Light Sensor senses whether it is bright or
dark in the target environment. You can
define the threshold for being bright or
being dark in the app. Navigate to the
Settings page of Motion Sensor in the app
for more information.
It is recommended to install Motion Sensor
1.2 to 2 m (3.9 to 6.6 ft.) above the ground.
The detection range will be reduced when
it is placed lower than 1.2 m (3.9 ft.). There
will be detection blind spots when it is
placed higher than 2 m (6.6 ft.).
0 9m
2m
1.2m
5°
55°
0
0º
9m
55°
55°
4m
4m

1009
Reset Button Facing Down (for Pet Owners) Place Motion Sensor without the Base
If you are a pet owner, it is recommended to
install Motion Sensor 0.1 to 0.2 m (3.9 to 7.9
in.) higher than your pet(s) with the Reset
Button facing down, to prevent false alarms
triggered by your pets.
Place Motion Sensor directly on a table or
shelf or stick it to a flat surface using the
3M double-sided adhesive tape.
Note: Make sure the lens is facing towards the
desired area to be detected and is placed close
to the edge of the table or shelf.
3m
0.1m-0.2m
55°
Reset Button facing down

1211
Place Motion Sensor with the Base
Mount the base to the back or the bottom
of Motion Sensor. The base can be
attached to an iron surface or a magnet.
You can also stick the base to a flat surface
using the 3M double-sided adhesive tape.
After Motion Sensor is properly installed,
tilt it to a desired angle.
Note: Make sure the lens is facing towards the
desired area to be detected and is placed close to
the edge of the table or shelf.
iron surface

13
Tips for Applying the Adhesive Tape
Battery Replacement
Open the battery cover, remove the old
batteries and insert two new AAA batteries
following the " + " and " - " signs. Then close
the battery cover and press it down until it
clicks into place
Firmware Upgrades
In order to improve user experience, we
will regularly release firmware updates to
introduce new functions and solve any
software defects that may occur during
usage. When a new firmware version is
available, we will send an upgrade notification
to your account via our app. When
upgrading, please make sure your product
has sufficient battery and make sure your
smartphone is within range to prevent
interference.
Resetting Factory Settings
Long press the Reset button for 15 seconds
or until the LED indicator light is on.
Note: After the device is reset, all settings
will resume to default values and the logs
will be erased.
Make sure the target surface is dry and clean.
Apply pressure to Motion Sensor / the base
for 60 seconds after installation. Keep it away
from any heat source such as light bulbs.
Battery Replacement, Firmware
Upgrades and Resetting Factory
Settings
14