Syba SY-UB20078 User manual

USB 3.0 7-Port Hub
User Manual
Ver. 1.00
All brand names and trademarks are properties of their
respective owners.

Contents:
Chapter T ee EOIN caccorsocevicnsoiaccocioncacicaciónonccnensereoreconas 3
LI PINE HN leila E 3
I MOS Se dis adios a di died +
Ps A a 4
A eiid -4
a DTO i . 00.0... N E E TN 5
Chapit T: Gotta Started .......:i0....ssccccossseesosssssscecassecaees Fi
A A DRON ... cite RA, 7
Chapter 3: Troubleshooting Tip..................sccccssscssssssesseees 8
E
MN3000000067 Page 2

Chapter 1: Introduction
1.1 Product Introduction
SuperSpeed USB 3.0 interface is the next revolution in I/O
interconnect standards that will deliver the bandwidth and features
required by PCs, consumer electronics and communications devices.
With 10 times faster throughput than USB 2.0 standard and backward
compatible with current USB device features, USB 3.0 interface will
be the trendy of IT technology.
SuperSpeed USB 3.0 Hub data transfer rate up to 5 Gbps when
connecting to USB 3.0 compliant peripherals. With USB
Hot-Swapping and Plug-n-Play function, you don’t have to worry
about running out of system resource on your motherboard or
complicated hardware installation process. USB 3.0 Hub supports USB
3.0 SuperSpeed device and backward compatible with USB 2.0
High-speed and USB 1.1 Full-speed device. It is an ideal choice for
external storage devices, MP3 players, enclosure, external writer,
digital cameras, webcam, networking and video devices, and all other
USB devices.
PARA ASAS RAE EA ERA O ee eee
MN3000000067 Page 3
1.2 Features
O Connects up to 7 USB devices
Provide
two
USB
3.0
and
five
USB
2.0
ports
Compliant
with
USB
3.0
Specification
1.0
Supports
simultaneous
operation
of
multiple
USB
3.0,
USB
2.0
and
USB
1.1
devices
Up to 5Gbps data transfer rate
Hot-swapping
feature
allows
you
to
connect/disconnect
devices
without
powering
down
the
system
No
device
drivers
required
for
Hub
installation
LED to indicate Hub power
1.3 System Requirements
e
Windows®
XP/Vista/7
(32/64
bit)
O
Available
USB
port
(USB
3.0
recommended)
1.4 Package Contents
©
1x
USB
3.0
7-Port
Hub
UUU
MN3000000067
Page
4

a 1 x USB 3.0 Cable
e 1 x User Manual
e 1.x Power Adapter (Optional)
Note: Contents may vary depending on country/market.
v
1.5 Hardware Description
Figure 2. Back
o Power Switch: When power adapter was attached, turn this
switch to ON will power hub by external power adapter
(self-powered). Otherwise the hub will be powered by upstream
USB port (bus-powered). When the PC is off or in standby mode,
put this switch in OFF position to switch off the hub for energy
Power awiicí saving.
Figure 1. Front
@ Power LED: The light will be on when the USB 3.0 7-Port Hub
is powered up. i
AA AA ARA ARAS RE ARS ¡EA a ke aaa aT a Ee Se IS ERA A |
MN3000000067 Page 5 MN3000000067 Page 6

Chapter 2: Getting Sta rted host controllers, and are provided by your USB 3.0 host controller
vendor.
2.1 Hardware Installation
If system can not install USB 3.0 7-Port Hubdriver properly, be
1. Plug the power adapter into the power jack of the USB 3.0 7-Port sure to confirm system’s USB 3.0 host controller’s driver working
Hub. properly. We do suggest that you may re-install your USB 3.0 host
2. Plug the USB 3.0 7-Port Hub into your computer’s Superspeed controller driver again.
USB 3.0 port.
3. Upon powering up your computer, the USB 3.0 7-Port Hub will be Chapter 3 j Trou bleshooting Tips
recognized by the computer’s operating system.
O I can not run USB 3.0 SuperSpeed data transfer rate over this
Hub.
1. USB 3.0 Hub must connects to USB 3.0 Port of your system.
4. Once complete, you are ready to plug all peripheral devices into
your new USB 3.0 7-Port Hub.
2. Be sure to use true USB 3.0 device connection. Traditional
USB 3.0 or USB 1.1 devices can NOT run USB 3.0
Note: Be sure to connect USB 3.0 7-Port Hub to USB 3.0 port on
the system, USB 3.0 Hub will NOT enhance USB data transfer rate,
SuperSpeed data transfer rate.
3. USB 3.0 Hub will NOT enhance USB data transfer rate, if
if you connect it to traditional USB 2.0 or USB 1.1 port.
There is no addition driver for USB 3.0 7-Ports Hub. Drivers for user connect it to traditional USB 2.0 or USB 1.1 Port.
USB 3.0 7-Port Hub is always supplied with drivers for USB 3.0
@ How to expand USB 3.0 SuperSpeed Port on my system?
AETAT T aS eA ISS A E A E A RAIS BEI ES E A SE E KER IS
MN3000000067 Page 7 MN3000000067 Page 8

You can purchase an USB 3.0 SuperSpeed Host Card adding on your
current system, or a new motherboard with USB 3.0 Port.
e How about connecting USB 3.0 Hub to traditional USB 2.0 Host
Port?
USB 3.0 Hub works, but only running under USB 2.0 High Speed
mode.
@ My USB 3.0 device does not work when connect to USB 3.0
Hub?
Please confirm your settings as below one by one.
1. Affirm USB connection cable between USB device and Hub
firmly.
2. Connect addition power adapter to your USB device, such
as enclosure.
3. Make sure PC’s USB 3.0 Port works where USB 3.0 Hub
connection.
e Should I use power adapter connecting to the USB 3.0 Hub?
It depends on user’s application. USB 3.0 Bus power only supports
_ _ ___ ___ => __ __ _zz>—— zE A
MN3000000067 Page 9
+5V@900m<A standard from PC Host. If user’s device cost higher
power current, an additional power adapter is necessary. User can use
5V j
D JO power adapter for connection.
¡( AG U AA SASSI
MN3000000067 Page 10