Sylvox RT22R3CAZA User manual

USER’S MANUAL
22/24inch RV TV
Note: The product and illustrations in this user's manual is only for explanation purposes and may vary depending on model.
S l ox
S l ox
Model: RT22R3CAZA
RT24R3CAZA

USER'S MANUAL
BEDIENUNGSANLEITUNG
MANUALE D’UTENTE
MANUEL DE L'UTILISATEUR
MANUAL DE USUARIO
English
Deutsch
Français
Italiano
Español
English
Recycling

The terms HDMI and HDMI High-Definition Multimedia Interface,
and the HDMI logo are trademarks or registered trademarks of
HDMI Licensing LLC in the Unites States and other countries.
English
English

Table of Contents
1 2
Table of Contents
Overview of remote control
Installing Batteries in the Remote Control
Introduction
Features
Specifications
General Description
Overview of front and side panel
Overview of back panel
External Connection
Supporting signals
Basic operation
Turning the TV On and Off
3
4
5
5
11-14
11
12
13
15
15
14
6
Accessories
3
Antenna connection
7-9
10
14
Connecting DVD Player/Set-Top Box
Connecting VCR
Connecting DVD Player/Set-Top Box via HDMI
Connecting EARPHONE
Assembling Stand Process
6
10
English
English
17
18
19
Picture defects and the reason
Boot Wizard
Source
Image
Picture
Sound
OSD Menu Operations 16-27
16
Troubleshooting 34
35
16
20-21
Channel
21-22
Function
36
DVD 32-33
24
25
26
Time
Lock
Media
Home
23
26
Settings
27
Network
Android part 26-31
27
Device Preferences
28
Abot
28
Software Update
29
Date&time
29
Language
30
Keyboard
30
Storage
31
Reset
Hardware Configuration
Warranty Policy 37-38
Remote & accessories
31

Input terminals used for external equipment connection
Introduction
Features
34
Introduction
W arnings
Specifications
One VIDEO output
One MINI AV input
Two HDMI input
One USB input
One Android RJ45 input
One DVB-S2 input
One EARPHONE output
One DVB-T2 input
One CI+ input
Base
Column bracket 5 Screws
RT24R3CAZA
24"
32W
DC 12V 4A
1920 X 1080
3.7 Kg
VESA100 x 100
543.60 127.00 345.50 mm x x
Product Dimensions
(Include base bracket)
RT22R3CAZA
22"
34W
490.20 124.50 312.40 mm x x
3.2 Kg
PAL/NTSC
DVB-T2-S2
48.25MHz‐863.25MHz
Video input Format
English
English

General Description
Overview of front and side panel
General Description
Overview of back panel
56
Assembling Stand Process
1. DC 12V-24V
DC input.
2. Android RJ45
Ethernet connection.
3. VIDEO OUT
Connection for VIDEO signal output in
Composite mode.
4. HDMI1/HDMI2
Connecting for HDMI signal.
5. DVB-S2
Connection of the satellite antenna.
6. DVB-T2
Connection of the DVB-T antenna or the
cable system.
1
7
Port
Side port
2 3 4
8 9 11
5 6
10
DVB-S2
HDMI2HDMI1
Android
RJ45
DC 12V-24V DVB-T2
AV OUT R
L
VIDEO
COAXIAL
OUT
CI+
EARPHONE
OUT MINI IN
AV
USB
7. USB IN
5V 0.5A.
8. EARPHONE
Connecting for headphone.
9. CI+
Slot for CI+ modules for decoding
encrypted TV programmes.
10.MINI AV IN
Connection for VIDEO signal input in
Composite mode.
11.COAXIAL
Digital audio output for external audio
devices.
Instruction:
1.Place the TV unit on a flat and clean table.
2.Fix stand by 2 pcs screws via screw hole B and A.
3.Fix stand by 3 pcs screws via screw hole D and C.
Screw
Screw hole A Screw hole B
Screw hole C Screw hole D
Screw
SPEAKER
REMOTE CONTROL SENSOR
POWER INDICATOR
Green: In power on mode.
Red: In standby mode.
Toggles between all the available input
sources
MENU
Press to see an on-screen menu of your
TV's features.
CH+/-
Press to change channels.
In the on-screen menu, use the CH +/-
buttons as up/down arrow buttons.
VOL+/-
Press to increase or decrease the volume.
In the on-screen menu, use the VOL +/-
buttons as left/right arrow buttons.
POWER
Press POWER button to toggle between
normal and standby mode.
SOURCE
PLAY /
Play/stop DVD (in DVD mode).
EJECT /
Eject DVD.
9
10
CH+ /
MENU
CH- /
VOL+ VOL-
SOURCE POWER
English
English

7
Overview of remote control
General Description
Overview of remote control
General Description
6
17
3
4
9
No. Button Description
POWER Turns the TV on or off to standby mode. 1
2MUTE Press to mute the sound. Press again to regain sound.
0-9 Press 0-9 to select a TV channel directly. The cannel will
change after 2 seconds.
5
7
8
10
11
13
14
16
15
18
19
23
20
21
22
24
25
26
27
28
29
30
CH.LIST
1
4
6
11
15
9
20
21
24
25
28
32
36
29
33
37
16
2
3
5
8
7
10
13
14
12
17
18
19 23
22
27
26
31
30
35
34
39
38
SLEEP Set the delay time for the TV to turn off automatically.
Return to the previously viewed program.
P.MODE Select the picture mode.
S.MODE Select the sound mode.
CH.LIST
DISPLAY Press to display the source and channel's info.
SOURCE Press to select signal sources for TV.
Allows you to navigate the on-screen menus and adjust the
system settings to your preference.
OK Select the option.
EXIT
MENU
Exit from the current menu or sub-menu.
Allows you to navigate the on screen menus (OSD).
12
CH+/- Press these two buttons to change channels up/down.
Press these two buttons to increase/decrease the volume.
VOL+/-
Android home screen.
HOME
ASPECT Press this button to select the aspect ratio of the screen.
Press to change the language of the audio in DTV or DVD mode.
AUDIO
I/II
Select NICAM mode.
Only be available in TV programmers with NICAM transmission,
and default mode is mono.
Delete function button.
R (DELETE)
Rename function button.
G (RENAME)
Move function button.
Y (MOVE)
Skip function button.
B (SKIP)
Eject/insert disc.
D.MENU Quick Teletext navigation or setup settings / DVD: Video
DVD Menu button.
SETUP DVD system setup.
D.DISP Quick navigation during Teletext or setup settings / DVD: DVD
Information button.
FAV Selects favorite channel(s).
EPG Press to display EPG (Electronic Program Guide).
TIME SHIFT Press to switch to TIME SHIFT mode immediately.
REC.MENU Press to switch to REC.MENU immediately.
SUBTITLE Press to select the subtitle language.
REVEAL Shows hidden words or pages by Teletext.
TEXT Switch on/off of Teletext window.
Android mouse.
Channel list.
S l ox
English
8
English

Installing Batteries in the Remote Control
Installing Batteries
1Open the battery compartment
cover on the back side.
2Insert two 1.5V AAA size batteries in
correct polarity. Don´t mix old or used
batteries with new ones.
3Closed the cover.
Point the remote towards the remote
control sensor of the wireless TV and
use it within 7 meters.
Put the used batteries into the recyc-
ling bin since it can negatively affect
the environment.
General Description
Battery
Cover
2xsize AAA 1.5V
Battery
Cover
Antenna connection
Antenna input impedance of this unit is 75ohm. VHF/UHF 75ohm coaxial cable can be
connected to the antenna jack directly, if the antenna cable is 300ohm parallel flat feeder
cable, you need to use the 300ohm/75ohm converter to connect the antenna cable to the
antenna jack. For details Please refer to the following drawing.
Use a 75ohm - 300ohm converter
300ohm coaxial cable
Antenna feeder
ANT IN
75ohm coaxial cable
Antenna cable
Antennas with 300ohm flat twins Leads Antennas with 75ohm Round Leads
External Connection
The battery (battery or batteries or battery pack) shall not be exposed
to excessive heat such as sunshine, fire or the like.
10
9
Overview of remote control
General Description
36
34
35
37
38
39
INDEX Returns to Index page by Teletext.
33
No. Button Description
31
32
Press to record the program immediately.
REC/
TV/RADIO Press to switch between DTV and radio programs
DVD: AB Segment playback.
A-B
Play and Pause Media-Player / DVD.
CANCEL Switches the Teletext window in the background, only the
current page no is visible.
Fast Rewind Media-Player and DVD.
MIX Transparency of Teletext window.
Fast Forward Media-Player and DVD.
DVD: Repetition mode button.
REPEAT
Zoom In or Out of the Teletext window.
SIZE
Stops playback Media-Player and DVD.
Holds on the current Teletext page.
HOLD
Plays the previous Media Player or DVD file/chapter.
Displays a sup-page of upper options.
SUBPAGE
Plays the next Media Player or DVD file/chapter..
English
English

External Connection
Connecting VCR
External Connection
These instructions assume that you have already connected your TV to an antenna or a
cable TV system. Skip step 1 if you have not yet connected to an antenna or a cable
system.
Follow the instructions in Viewing a VCR or Camcorder Tape to view your VCR tape.
Each VCR has a different back panel configuration.
When connecting a VCR, match the color of the connection terminal to the cable.
We recommend the use of cables with a Ferrite Core.
1. Unplug the cable or antenna from the back of the TV.
2. Connect the cable or antenna to the ANT IN terminal on the back of the VCR.
3. Connect an RF Cable between the ANT OUT terminal on the VCR and the ANT IN
terminal on the TV.
4. Connect a Video Cable between the VIDEO OUT jack on the VCR and the VIDEO IN
jack on the TV.
5. Connect Audio Cables between the AUDIO OUT jacks on the VCR and the AUDIO L and
AUDIO R jacks on the TV.
If you have a mono (non-stereo) VCR, use a Y-connector (not supplied) to hook up to
the right and left audio input jacks of the TV. If your VCR is stereo, you must connect
two cables.
This connection can only be made if there is a HDMI Output connector on the external
device.
What is HDMI?
HDMI, or high-definition multimedia interface, is a next-generation interface that enables
the transmission of digital audio and video signals using a single cable without
compression.
Multimedia interface is a more accurate name for it especially because it allows multiple
channels of digital audio (5.1 channels).
The difference between HDMI and DVI is that the HDMI device is smaller in size, has the
HDCP(High Bandwidth Digital Copy Protection) coding feature installed, and supports
multi-channel digital audio.
Each DVD player/STB has a different back panel configuration.
We recommend the use of cables with a Ferrite Core.
1. Connect an HDMI Cable between the HDMI connector on the TV and the
HDMI connector on the DVD player/Set-Top Box.
Connecting DVD Player/Set-Top Box via HDMI
11 12
VCR Rear Panel
Video Cable (Not supplied)
RF Cable (Not supplied)
TV Rear Panel
TV Rear Panel
HDMI Cable (Not supplied)
DVD Player/Set-Top Box
RF IN
IN
HDMI
MINI AV I N
English
English

External Connection
13 14
Connecting DVD Player/Set-Top Box
The rear panel jacks on your TV make it easy to connect a DVD to your TV.
and the AUDIO OUT jacks on the DVD player.
the TV and the COMPONENT [Y, PB, PR] jacks on the DVD player.
Component video separates the video into Y (Luminance (brightness)), Pb (Blue) and Pr
(Red) for enhanced video quality.
Be sure to match the component video and audio connections.
For example, if connecting the video cable to COMPONENT IN, connect the audio
cable to COMPONENT IN also.
Each DVD player/STB has a different back panel configuration.
When connecting a DVD player/STB, match the color of the connection terminal to the
cable.
We recommend the use of cables with a Ferrite Core.
1. Connect a Component Cable between the COMPONENT IN [Y, PB, PR] jacks on
2. Connect Audio Cables between the COMPONENT IN [R-AUDIO-L] jacks on the TV
Component Cable (Not supplied)
DVD Player/Set-Top Box
Audio Cable (Not supplied)
R
L
AUDIO
OUT Pr
Y
COMPONENT IN
Pb
Supporting signals
Connecting EARPHONE
1.Plug EARPHONE out connector into EARPHONE out jack on the TV the TV speaker will
be muted.
Phone Out
EARPHONE
OUT
External Connection
1360X768
1920X1080
English
English