Syris SYRD245-1N-PW User manual

SYRD245-1N-PW
2.45 GHzRFIDNetworkReader
User Manual
Version 2.00
2020/10/21

SYRD245-1N-PWactive RFID NetworkReaderUserManual
1
.ProductSpecification
Communication 2.45 GHzSupport read andwrite
Frequency 2.40~2.48 GHz
Channel 316
RSSI 0-255
LQI 0-255
Programmable Set Parameter
LED Multi-LEDvisualindication
Wi-Fi 802.11 b/g/n
Ethernet 10/100 base-TEthernet (RJ-45)
RS-232 RX,TX
DI/DO 4 digitalinput point and 2 relayoutput
Operation mode TCP(Server/Client), UDP
Baud Rate 2,400 bps~115,200 bps
PowerInput 7 VDC~15 VDC / 1W~6W
POE(option) IEEE802.3afcompliant
Operating Temperature -20oC to65oC, 5to 95%RH
Storage Temperature -30oC to85oC, 5to 95%RH
Dimension 107Wx138H x30D (mm)

SYRD245-1N-PWactive RFID NetworkReaderUserManual
2
Ⅱ. TheDiagramoftheSystemConnection
SYRD245-1N-PWNetworkReadercan connectwith 4different interfaces
Wi-Fi, Ethernet, RS-485 orRS-232.
Ⅲ. NetworkParameterSetting
1. Execute NET_Discover_V0110.exe”and press to search SYRD245-1N seriesproduct.
2. FactorydefaultIPis DHCP”or 192.168.1.101”.Usercan checkthe MAC address fromproductstickerwith
IPto confirmthe device.

SYRD245-1N-PWactive RFID NetworkReaderUserManual
3
3. Double clickIPto openthe web configure page(ex.http://192.168.1.101)
DefaultloginID /Password:admin/ admin
4. Defaultnetworkmode asthe following.

SYRD245-1N-PWactive RFID NetworkReaderUserManual
4
Communication Parameters FactoryDefault
SerialConfigure 115200,8,n,1
SerialFraming Length 1050
Locale/Remote Port Number 4001
IV. SwitchNetworkMode
SYRD245-1N-PWsupport 4 networkmodes: Default ETH(Ethernet) Wi-FiSTA Wi-FiAP.
Default Ethernet (DHCP)+Wi-FiAP mode(forsetting)
ETH Ethernetonly (Factory default)
WIFI(STA) Wi-Ficlient mode
WIFI(AP) Wi-FiAP mode(forsetting)
1. ETH：Standard TCP/IPReader
When usermodifythe IPandclickon Applybutton, devicewillreboot and applythe settingafter10 seconds.

SYRD245-1N-PWactive RFID NetworkReaderUserManual
5
2. Wi-Fi(STA)：SYRD245-1N-PWcan set to communicate viaWireless AP without Ethernet.
STASSID: Enterthe correct AP’sSSID.
STAEncType : SelectEncrypt type forAP connection.
STAPasswd: Entercorrect AP’spassword.
IPType: Default isDHCPmode. Ifuserneedsto setup a staticIP, please selectStatic.

SYRD245-1N-PWactive RFID NetworkReaderUserManual
6
3. Wi-FiAP mode：SetupSYRD245-1N-PWasAP (Wireless Access Point)forclientdevice to communicate.
Thismode isusuallyforsettingdevice.
APSSID: Setup SYRD245-1N-PW’sSSID.
APEncType : Select Encrypt Type forthe AP.
APPasswd: Setting SYRD245-1N-PW’sWi-Fipassword.
LANIPAdder:Setting SYRD245-1N-PW’sWi-FiIPaddress.
LAN Mask:Setting SYRD245-1N-PW’sWi-Fisubnet mask.

SYRD245-1N-PWactive RFID NetworkReaderUserManual
7
4. Default mode：Ethernet (DHCP)+Wi-FiAP mode.
It’sDual-Mode (Ethernetand Wi-FiAP，but Ethernet onlysupport DHCP.)
DefaultSSID:SerialWIFI_C57C (C57C isdependsonMACaddress)
DefaultPassword: 12345678

SYRD245-1N-PWactive RFID NetworkReaderUserManual
8
V. ResetnetworktoDefault.
1. Open the side coverofreaderwith coin orflathead screwdriver.
2. Screwthe lidofReaderbythe properscrewdriver.

SYRD245-1N-PWactive RFID NetworkReaderUserManual
9
3. Press initialbutton for10 secondsand wait readerto reboot.
4.Communication Parameters FactoryDefault
IPaddress 192.168.1.101
SerialConfigure 115200,8,n,1
SerialFraming Length 1050
Locale/Remote Port Number 4001

SYRD245-1N-PWactive RFID NetworkReaderUserManual
10
Ⅵ. TCPServerMode
In TCPServermode, SYRD245-1N readerprovidesauniqueIP:Portaddress on
aTCP/IPnetwork. SYRD245-1N readerwait passivelyto becontacted bythe
host computer, allowing thehost computerto establisha connectionwith and get
data fromthe serialdevice.
1. SettingOperating Mode

SYRD245-1N-PWactive RFID NetworkReaderUserManual
11
2. When you finished change operating mode, you canexecute SYRISXtiveutility to read TAG.
(SYRISXtiveDVD-ROM\SYRD245-1\Utility\Xtive.exe)
3. Select and modifycorrect IPaddress tocommunicate with Reader.
(You can communicate multi-readerat the same time)
Starting readTAGwillreceiveTag information fromreader.

SYRD245-1N-PWactive RFID NetworkReaderUserManual
12
4. Field Introduction:
a.UID: Tag’sidentification number.
b.RSSI: Received SignalStrength Indication (0-255). Reading range andRSSIare inverseproportion.
c.LQI: Linkqualityindicator(0-255).
d.DI: TAGstatusand indicator.
[BAT]meansTAGbatteryvoltage level.(0~15, 15 isfull voltage)
[SW]meansTAGcall button wasclicked.
[SENSOR] meanslight sensorhavedetect light. (OnlyforWristband TAG)
[START]meansTAGreboot.
e.T1: Ambient temperature sensor(OnlyforWristband TAG)
f.T2: Skin temperature sensor(OnlyforWristband TAG)
Note: T1 / T2 / SENSOR use foranti-tampercapability.
5. Select TAGID to sift the target TAGfromleft window to rightwindow.

SYRD245-1N-PWactive RFID NetworkReaderUserManual
13
6. Select ViewSelect TAG”tab togettarget TAGinformation.

SYRD245-1N-PWactive RFID NetworkReaderUserManual
14
Ⅶ. TCPClientMode
In TCPClient mode, SYRD245-1N-PWreadercan activelyestablishaTCP
connection to a pre-definedhost computerwhen serialdataarrives.
1. SettingOperating Mode
Change operating mode to TCPClient”and Remote Domain”IPaddress and Port.
2. When you finished change operating mode, you canexecute SYRISXtiveutility to read TAG.

SYRD245-1N-PWactive RFID NetworkReaderUserManual
15
3. Select TCPClient”Tab and starting readTAGwill receiveTag information fromreader.