Syrp Capstan Genie II Linear User manual
SETUP GUIDE / CAPSTAN
INSTALL THE CAPSTAN /
Align the markings and insert
the Capstan.
Correct Rope Direction
Incorrect Rope Direction
Turn the Capstan counter clockwise
until you hear a CLICK!
The rope shouldn’t
exit the channels and
cross back over itself.
01
02
REMOVE THE CAPSTAN /
Push the Capstan Release button
and hold in.
Turn the Capstan clockwise and pull
it out to remove it.
UNLOCK
01
02
THREAD THE CAPSTAN /
Holding the Capstan with the bayonet
end down, thread the rope in through
the bottom channel from the right to
the left.
Thread the rope around the Capstan
until you can count 4 rope winds
through the capstan window.
Pull the rope up out through the
top channel.
1x
2x
3x
4x
Wind 4x around
The Capstan is pre-wound, avoid
removing unless absolutely necessary.
01
02
03
www.syrp.co
youtube.com/syrptube
vimeo.com/syrp
instagram.com/syrp_
facebook.com/syrp.co.nz
twitter.com/syrp_
syrp@syrp.co.nz
STAY IN TOUCH /
Please stay in touch with us, join our
community and show us your work.
Table of contents
Other Syrp Camera Accessories manuals
