Sysd SY-WIFI002 User manual

WIFI Video Doorbell
User Manual
-----------------------------------------------------------------------------------------------
Please read this user’s guide carefully before using this products

Catalogue
Products Introduction………………………………………………………1
Interface……………………………………………………………………2
Installation …………………………………………………………………3
Specification…………………………………………………………………4
Packing List …………………………………………………………………5
APP Operation………………………………………………………………6
APP Interface function setting ……………………………………………7
APP Icon ……………………………………………………………………8
Outdoor Camera Operation………………………………………………9
Failure Diagnosis…………………………………………………………10
Work environment…………………………………………………………11
Notice………………………………………………………………………12
Warranty……………………………………………………………………13
Attention:The illustrations in this manual, the screen display, All in order to
more directly in detail expound the operation of the products, due to the
different version upgrades and production batch, they might a little different
from the machine with you, If mentioned in this manual content does not
accord with your machine, please refer to our machine.

1. Products Introduction
WiFi video doorbell connects to network via wireless router or network
cable.Mobile devices include smartphone or tablet,could connect to the
doorbell;After the visitor rings,mobile devices could interact with doorbell via
real time video and audio,user can view the visitor,then decide to whether
intercom or open the door etc.
WiFi doorbell support PIR and motion detection alarm,with IR night
vision,12V power supply.
2.4G Wifi,real time viewing,max to support 100M broadband,support
Android and IOS operation system.
Multi doorbell and multi mobile device can work at the same time.
With CE and ROHS certificate.
Functions：
1.With touch calling button；
2.With rain-proof cover,
3.With unlock function(suitable DC 12V often open/often atresia lock),can
connect to access control power supply.
4.Can connect door exit.
5.One doorbell can support max to 5 mobile devices
6.One mobile device can support multi WiFi doorbells.
7.With intercom function,voice loudly.
8.Support PIR .
9.Support motion detect alarm

11.With IR night vision.
11.Support monitor function through mobile device.
12.Can take photo
13.Can take video(the video file will store on the mobile device)
14.Can open the door by ID card,password,remote controller.
15.P2P cloud service could push messages of visitor calls、visitor photos and
motion detect alarm to mobile device.
Device Requirement:
1. Smartphone or tablet above Android 4.2 version,IOS.
2. Home network above 2M.
3. Mobile Phone network 2G,3G,4G
2. Product Description
Front: Back：

1. Black Door exit（-）
2. Red Door exit（+）
3. Yellow Power off Unlock（+）
4. Black 电锁共锁
5. Red Power on Unlock（+）
6. Black 12V Power（-）
7. Red 12V Power（+）
8. Network Port
9. Doorbell reset Key
10.wifi Reset Key
Note:(Doorbell reset Key is for restore the programming code,wifi reset key is
for restore the APP default code)

3. Installation:
4. Specification
Model
SY-WIFI002
Lens
1/4 / F2.4 / 92 degree
Pixel
1 million
IR Led
5 PCS
IR distance
3-5 meters
Power supply
DC12V 2A
Power
standby:1.5W work:3.8 W
Size
168*110*65MM
Series
List
Index
1
Working voltage
DC：Voltage 15V electric current less than
200mA
2
Memory capacity
500 ID cards、500 code、10 group universal code
3
Cards read distance
0－5CM
4
Cards type
EM or EM compatible card

5. Packing List
1). wifi Outdoor Unit*1
2). 12V/2A Power supply*1
3). Network wire*1
4). Unlock wire*1
5). Screws*1
6). Tool *1
7). Remote controller*1
8). ID Card * 1
9). Rainproof Shield*1
10).Manual*1
6. APP Operation
Support OS：Android & IOS（V4.1 version）
1. APP install:
For Android:
Search “SYSD” in the HIMARKET APP store or Scan the QR Code which on
the back of this wifi video doorbell,then download and install it . (If no
HIMARKET APP store on your mobile device,please search HIMARKET APP
store and then install it first)
For IOS:
Search “SYSD” in the IOS app store which on the back of this wifi video
doorbell,then download and install it.

2. After installation,it appears icon ,click to run the wifi video
doorbell APP.
3. Connect the power supply and network wire to the outdoor unit,run the wifi
video doorbell APP,it shows below picture:
There are 2 ways to login: By Mobile or By Email/ID.For new user,it need to
register first,then log in.
4. After log in,it appears “ Discover 1 new device” as picture:
5. Click icon “>” to enter into the “New equipment list”,click the green icon “+”
to add device,put the password (the default password 123 ),then save,it will
show the new device name,like as picture:

6. If no “ New equipment list “,can select “Manual Add”.Press the calling
button of outdoor unit,then can view the visitor information on mobile
device,click “ignore”,then click “+” to select “Manual Add”,input the device ID
(it is the number just you saw),device name (any one is ok),password ( the
default password 123),like as picture:

7. APP Interface Function Setting
Under the Device list,click “online”,it shows Playback、Settings、Edit，like as
picture:
Click “Playback” to view the record video;click “Edit” to edit the device name.
Click “Setting” to enter into setting interface,as picture: