Takeuchi TB240 User manual
HYDRAULIC EXCAVATOR
TB240
®
From World First to World Leader
-RKQ(GZDUGV
*RYHUQPHQWDO6DOHV0DQDJHU
MHGZDUGV#FRZLQFRP
FSA
3URGXFW)HDWXUHV6SHFLÀFDWLRQV
Angle Blade with Reversible Bolt On Cutting Edge Track Options - Rubber or Steel
ENGINE
86(3$)LQDO7LHU&RPSOLDQW
'2&'3)([KDXVW$IWHU7UHDWPHQW
$XWRPDWLF)XHO%OHHG6\VWHP
'XDO(OHPHQW$LU)LOWHU
$XWRPDWLF,GOH
:RUNLQJ0RGHV3RZHU(FRDQG+LJK
$OWLWXGH
(QJLQH3UHKHDW6WDUWLQJ$LG
+LJK&DSDFLW\5DGLDWRU
+LJK&DSDFLW\)XHO)LOWHUV
ELECTRICAL
/&',QIRUPDWLRQDO'LVSOD\FDQRS\
´&RORU0XOWL,QIRUPDWLRQDO'LVSOD\
FDE
6HDOHG5RFNHU6ZLWFKHV
YROW6\VWHPZLWKDPS$OWHUQDWRU
+DORJHQ:RUN/LJKWV%RRPDQG6LGH
&RYHU
7UDYHO$ODUP
+RUQ
HYDRAULIC & WORKING EQUIPMENT
9DULDEOH'LVSODFHPHQW2SHQ&HQWHU
+\GUDXOLFV
+LJK&DSDFLW\+\GUDXOLF2LO&RROHU
/DUJH+\GUDXOLF5HVHUYRLUZLWK)OXLG
/HYHO6LJKW*DXJH
&XVKLRQHG%RRP$UPDQG6ZLQJ
&\OLQGHUV
0DLQ%RRP&\OLQGHU*XDUG
+\GUDXOLF3LORW&RQWUROV
3URSRUWLRQDO$X[LOLDU\&RQWUROVZLWK
'HWHQW
$GMXVWDEOH$X[LOLDU\)ORZ
3ULPDU\$X[LOLDU\+\GUDXOLF&LUFXLW
3OXPEHGWR$UP
0XOWLSOH$WWDFKPHQW3UHVHWV
)ORZ6HOHFWRU9DOYH3ULPDU\$X[LOLDU\
&LUFXLW
3DWWHUQ&KDQJH9DOYH,62RU6$(
3LORW$FFXPXODWRU
/RQJ$UPZLWK,QWHJUDWHG7KXPE
0RXQW
'XDO3LQ3RVLWLRQ%XFNHWRSWLRQDO
0HFKDQLFDO%XFNHW4XLFN&RXSOHU
RSWLRQDO
0DLQ3LQ+\GUDXOLF7KXPERSWLRQDO
OPERATOR’S STATION
5236723623*,62
/HYHO)RXU3RVW&DQRS\
'HOX[H+LJK%DFN6XVSHQVLRQ6HDW
$GMXVWDEOH$UP5HVWV
3URSRUWLRQDO6OLGH6ZLWFKIRU$X[LOLDU\
+\GUDXOLFV
´5HWUDFWDEOH6HDW%HOW
´5HWUDFWDEOH6HDW%HOWRSWLRQDO
&DEZLWK$LU&RQGLWLRQHU+HDW
'HIURVW:LQGVKLHOG:LSHUDQG
:DVKHU6N\OLJKWZLWK6XQVKDGH
$0)0035DGLRY3RZHU
2XWOHWRSWLRQDO
UNDERCARRIAGE AND FRAME
7ULSOH)ODQJHG7UDFN5ROOHUV
7ZR6SHHG7UDYHOZLWK$XWRPDWLF6KLIW
+LJK7RUTXH3ODQHWDU\)LQDO'ULYH
+HDY\'XW\'R]HU%ODGHZLWK)ORDW
/DUJH:UDS$URXQG&RXQWHUZHLJKW
´5XEEHU7UDFNV
´6WHHO7UDFNVRSWLRQDO
3RZHU$QJOH%ODGHZLWK)ORDWDQG
%ROWRQ&XWWLQJ(GJHRSWLRQDO
TAKEUCHI FLEET MANAGEMENT
<HDU6WDQGDUG6HUYLFH
0LQLPL]H'RZQWLPH
5HPRWH'LDJQRVWLFV
8WLOL]DWLRQ7UDFNLQJ
3URDFWLYH0DLQWHQDQFH
&RQWURO&RVWV
OPERATING PERFORMANCE
2SHUDWLQJ:HLJKW&DQRS\ OE NJ
&DE OE NJ
0D[LPXP%XFNHW%UHDNRXW)RUFH OE NJ
0D[LPXP$UP'LJJLQJ)RUFH OE NJ
$UP/HQJWK IWLQ PP
6OHZ6SHHG USP
7UDFWLRQ)RUFH OE NJ
*URXQG3UHVVXUH&DQRS\ SVL N3D
&DE SVL N3D
0D[7UDYHO6SHHG
/RZ5DQJH PSK NPKU
+LJK5DQJH PSK NPKU
ENGINE
0DNH0RGHO <DQPDU719&
'LVSODFHPHQW FXLQ /
+RUVHSRZHU#USP KS N:
0D[LPXP7RUTXH#USP IWOE 1P
HYDRAULIC SYSTEM
7RWDO+\GUDXOLF)ORZ JSP /SP
$X[LOLDU\+\GUDXOLF)ORZ JSP /SP
6\VWHP2SHUDWLQJ3UHVVXUH SVL 03D
FLUID CAPACITIES
(QJLQH/XEULFDWLRQ TW /
&RROLQJ6\VWHP TW /
)XHO7DQN&DSDFLW\ JDO /
)XHO&RQVXPSWLRQ
RI)XOO/RDG
JDOKU /KU
+\GUDXOLF5HVHUYRLU&DSDFLW\ JDO /
+\GUDXOLF6\VWHP&DSDFLW\ JDO /
$77$&+0(176
7ᄀ
6HH\RXUDXWKRUL]HG7DNHXFKLGHDOHUIRUDGGLWLRQDOLQIRUPDWLRQDQGDWWDFKPHQWRSWLRQV
TB240 Lifting Capacities at Ground Level*
/LIW3RLQW5DGLXVIURP5RWDWLRQ$[LV IWPP IWPP
/LIWLQJ&DSDFLWLHV
2YHU)URQW%ODGH'RZQ OE NJ OE NJ
/LIWLQJ&DSDFLWLHV
2YHU6LGH OE NJ OE NJ
5DWLQJVEDVHGRQ,62DQGGRQRWH[FHHGRIK\GUDXOLFOLIWRURIWLSSLQJORDG
Canopy Display Cab Display Long Arm with Thumb Mount Convenient Serviceability
TB240 Compact Excavator
MACHINE DIMENSIONS
$0D[LPXP5HDFK IWLQ PP
%0D[LPXP5HDFKDW*URXQG/HYHO IWLQ PP
&0D[LPXP'LJJLQJ'HSWK IWLQ PP
'0D[LPXP9HUWLFDO'LJJLQJ'HSWK IWLQ PP
(0D[LPXP'LJ+HLJKW IWLQ PP
)0D[LPXP'XPSLQJ+HLJKW IWLQ PP
*)URQW6ZLQJ5DGLXV IWLQ PP
+ IWLQ PP
,7DLO6ZLQJ6OHZ5DGLXV IWLQ PP
-7UDQVSRUW/HQJWK IWLQ PP
.7UDQVSRUW+HLJKW IWLQ PP
/*URXQG&OHDUDQFH LQ PP
08QGHUFDUULDJH/HQJWK IWLQ PP
17UDFN:LGWK5XEEHU LQ PP
28QGHUFDUULDJH:LGWK IWLQ PP
-
$
,
/
+
1
0
2
.
*
)
(
'
&
%
3-20
OPERATION
CAUTIONS ON TRAVELING ON SLOPES
• Never travel on slopes that are too
steep for the machine to maintain its
stability. (maximum gradeability: 30°,
lateral tipping angle: 15°) Note that in
reality, the machine’s stability becomes
lower than the above values depending
on the working condition.
• When traveling on slopes, lower the
bucket to a height of 20 to 30 cm (8 to
12 in.) above the ground. When climbing
a steep slope, extend the hoe
attachment to the front. In emergencies,
lower the bucket to the ground and stop
the machine.
• When traveling on slopes or grades,
drive slowly in 1st (low) speed.
• When climbing a hill, keep the
operator’s seat facing the hillside. When
descending a hill, keep the operator’s
seat facing the downhill direction. In
either case, travel must be done while
paying attention to the ground in front
of the machine.
• Do not descend slopes in reverse.
OPERATING PROCEDURES
• Do not change directions on slopes or
traverse slopes. First return to a flat
surface, and then take an alternative
path.
• The machine may slip sideways even on
a slight slope if they are covered with
grass or dead leaves, or when traveling
on a wet metal plate or frozen surfaces.
Do not allow the machine to position
sideways to slopes.
Traveling posture on slopes
Climbing slopes
When climbing slopes of 15° or more,
maintain the machine posture as shown in
the figure above.
Descending slopes
When descending slopes of 15° or more,
slow down the engine speed and maintain
the machine posture as shown in the figure
above.
Operating Weight: 8,570 lbs. TOPS/ROPS/OPG 4 post canopy
Width: 5' 8.5" Color gauge panel with multi-function operator information center
Maximum Dig Depth: 11' 4.4" High back adjustable suspension seat
Bucket Digging Force: 9,959 lbs. Pilot operated joystick control with pattern change valve
Horsepower / RPM: 35.8 / 2,200 EPA Final Tier 4 compliant engine with DPF and engine monitoring system
Travel Speed: 1.8 / 3.3 mph Self bleeding fuel system with ground level fuel fill, sight gauge and lockable door
Auxiliary Flow: 17.1 gpm Side by side industrial type radiator and hydraulic oil cooler
Boom Swing: Left 76o/Right58oPrimary 2-way auxiliary hydraulic circuit w/adjustable flow control system,
Track width: 13.8" proportional slide switch, one-way mode and continous detent mode
Safety features include: Travel alarm, retractable seat belt,
Two speed travel with automatic shift down control lockout, pilot accumulator, and lights
Reinforced arm w/ Integrated thumb mount Varibable displacement axial piston pump
Heavy duty dozer blade with float Auto Idle
TFM hardware standard equipment, service included through the standard warranty period (Canopy: sn 124001379~ / Cab: sn 124001483~)
Factory Code
TB240
Description
TB240 Canopy Equipped with Rubber or Steel Tracks
18" Pin-On Bucket with teeth, 2.7 cu. ft. capacity
BASE MACHINE WITH STANDARD EQUIPMENT
TB240
519 Bonnie Valentine Way, Pendergrass, GA 30567 Compact ExcavatorTel:706-693-3600 Fax:706-693-3725
www.takeuchi-us.com
STANDARD EQUIPMENT
Included
John Edwards, Governmental Sales Manager, 850-685-7055, [email protected]
WARRANTY TERMS AND CONDITIONS
GENERAL WARRANTY INFORMATION
The Takeuchi warranty is a limited warranty that is provided
to the retail purchaser in return for consideration paid as part
of the purchase price of the product and, in the case of a
coverage plan, in return for additional monies paid. The sell-
ing dealer must review the warranty coverage with the retail
purchaser and obtain a signature on the Delivery Report
and Warranty Registration Form. Subject to the terms of the
Takeuchi warranty, Takeuchi warrants to the rst purchaser
that the new Takeuchi machine will be free from defects in
material and workmanship for the period set forth below:
• New Excavators, Rubber Track Loaders, Skid Steer
Loaders, and Wheel Loaders - 24 months or 2,000
machine hours, whichever occurs rst.
• Takeuchi Replacement Parts - 12 months or to the
end of the new machine warranty period, whichever is
longer.
• Batteries - 12 months, pro rata basis.
• Takeuchi Attachments and Options - 12 months (ex-
cluding ground engaging attachments).
• Rubber Tracks - Takeuchi brand OEM and aftermar-
ket 12 months, pro rata basis (parts only).
The warranty period for all coverage begins at the time that
any one of the following conditions are met no matter which
occurs rst:
• Unit is sold to a retail customer.
• Unit is placed into rental.
• Unit accumulates over 100 hours on hour meter.
• Twelve (12) months from the Takeuchi invoice due
date.
RESPONSIBILITY
Takeuchi’s Responsibility:
• To provide customers and dealers with high quality
and reliable equipment.
• To pay our dealers quickly and fairly for warrantable
repairs.
• To analyze failed parts and review warranty claims so
that we can take corrective action to reduce warranty
incidents and increase customer satisfaction.
• To provide training regarding the maintenance and re-
pair of Takeuchi products.
• To provide quick and easy access to required support
information.
Dealer’s Responsibility:
• To analyze the customer’s needs and specify the right
equipment for the application.
• To provide adequate facilities and equipment to prop-
erly service Takeuchi products; this includes having all
required Takeuchi service tools on hand.
• To employ technicians who are qualied to service
Takeuchi products.
• To register equipment promptly when it is placed into
service, so warranty coverage is in eect.
• To consider all factors and information when making/
submitting a warranty claim and provide all requested
information regarding the failure and repair in a timely
fashion.
• To determine if the Takeuchi product is under warranty
before performing any repairs.
• To repair Takeuchi products in a timely manner.
• To correctly repair Takeuchi products the rst time.
• To submit a completed warranty claim online within
30 days of repair date.
• To retain the failed parts for 90 days after payment
has been received.
• To perform required updates and modications in a
timely fashion.
Customer’s Responsibility:
• To maintain the equipment in accordance with the in-
structions in the Operator’s Manual, and to keep ac-
curate records of this maintenance.
• To operate the equipment in a safe manner that is
within the parameters of the designed utility.
• To cease operation of the equipment if a defect occurs
so as to avoid extra damage which may be caused by
continued operation.
• To deliver the equipment to the dealer so that repairs
can be made.
• To comply with all requests for updates and modi-
cations required to be performed on any Takeuchi
equipment.
The Takeuchi warranty remains in eect during the war-
ranty period if the owner performs the required mainte-
nance at the recommended intervals outlined in the prod-
uct Operator’s Manual and the unit is operated within its
rated capacity. If a defect occurs, either in the material or
workmanship, it is the customer’s responsibility to cease
operating the unit until repairs are made. DAMAGES OC-
CURRING FROM CONTINUED USE AND/OR NEGLECT
MAY NOT BE COVERED BY WARRANTY. Owners should
contact their local authorized Takeuchi dealer immediately
so that repairs can be made. It is the owner’s responsibil-
ity to return the machine to an authorized repair facility for
warranty repairs.
SECURING WARRANTY SERVICE
Warranty service must be obtained at an authorized
Takeuchi dealer location or an approved Takeuchi ser-
vice center and requested within the applicable coverage
period.
• Takeuchi will, during the applicable warranty period,
repair or replace at its option any component or parts
(except those specied below) that, as delivered to
the original purchaser, are defective in material and
workmanship. Takeuchi will determine in its sole dis-
cretion, whether a defect of failure is covered by this
warranty. No charge shall be made to the purchaser
for parts and reasonable labor incurred in making the
repairs except as otherwise stated below.
• Warranty repairs will be performed by an authorized
Takeuchi service center upon delivery of the machine
or defective part to the service center. At the time
of requesting warranty service, the purchaser must
present evidence of the date of purchase of the ma-
chine.
• The purchaser shall pay any premium for overtime
and additional labor requested by the purchaser,
any charge for eld service calls, mileage charges,
transporting the machine or parts thereof to and from
1.0
TAKEUCHI MFG. (U.S.), LTD.
1.1
1.2
Warranty Terms and Conditions: Last revision 1/11/2019
Page: 1 of 3
®
519 Bonnie Valentine Way, Pendergrass, GA 30567 | 706.963.6300 | takeuchi-us.com
the place where the warranty is performed and un-
usual freight charges for the shipment of parts from
Takeuchi which the purchaser may request.
ITEMS NOT COVERED BY WARRANTY
The Takeuchi New Machine Limited Warranty does not
cover:
• Any machine which has been altered or modied in a
manner which, in the sole judgment of Takeuchi, af-
fects its performance, stability or reliability, including
the use of non-approved attachments.
• Depreciation or damage caused by normal wear and
tear, failure to properly maintain the machine, improp-
er use or abuse of the machine, collision, re or ac-
cident, vandalism, negligence, or operation beyond
rated capacity or specications.
• Parts or components that are covered by separate
and specic warranties, including but not limited to
tires and warranties extended by other manufactur-
ers.
• Accident or damage caused by the environment,
such as but not limited to: exposure to corrosive or
hazardous materials.
• Replacement of wear items, such as but not limited to
buckets and bucket teeth, cutting edges, pins, bush-
ings, glass, radios, tires, wheels, and undercarriage
components.
• Normal maintenance parts and labor including, but
not limited to: replenishment of oils, lubricants, cool-
ants, uids, hydraulic oil, lights, lters, belts, hoses
and ttings.
• Machines not properly registered with Takeuchi when
rst placed into service.
• Costs associated with pickup and delivery of the
equipment, rental of replacement equipment during
the repair period, economic loss during the repair,
overtime labor charges, travel time, mileage or zone
charges and freight charges of replacement parts.
WARRANTY REGISTRATION
New machine warranty coverage begins when the ma-
chine is properly registered. Registration is realized when
the registration is initiated online and completed by the
Delivery Report and Warranty Registration Form being re-
ceived and processed by Takeuchi. A machine must be
registered when any of the following conditions are met no
matter which occurs rst:
Unit is sold to a retail customer.
Unit is placed into rental.
Unit accumulates over 100 hours on hour meter.
Twelve (12) months from the Takeuchi invoice due
date.
Please note that if the Warranty registration is not received
when the machine is put into service, the warranty start
date will be determined by the sole judgment of Takeuchi
Mfg. U.S. based on invoice paid date, hours, date sold to
retail customer or dealer rental eet in service date. War-
ranty claims will not be accepted until the proper registra-
tion has been received by Takeuchi Mfg. U.S.
The completed warranty registration form must be sent to:
Takeuchi Mfg. U.S. Ltd.
Attn: Warranty Department
519 Bonnie Valentine Way
Pendergrass, GA 30567
WARRANTY REIMBURSEMENT
Takeuchi provides for warranty reimbursement due to de-
fects in material or workmanship only. Warranty does not
include restoring to factory new condition, any machine or
portion thereof which has accumulated hours of operation.
This includes customer-owned and used equipment still
covered by warranty.
With the exception of only a few parts not available through
Takeuchi, all Takeuchi warranty repairs must be performed
using ONLY genuine Takeuchi new service parts. Installa-
tion of non-Takeuchi replacement parts does NOT qualify
for warranty reimbursement and can void the machine’s
warranty.
Under no circumstance may a dealer take a credit against
their open account for a pending warranty claim. Addition-
ally, dealers are responsible for making sure that their
parts account is maintained according to the Takeuchi
Terms and Conditions Agreement. Failure to comply will
subject the dealer to interest penalties, terms reduction, or
parts termination.
Pre-Authorization: The dealer must obtain email pre-au-
thorization from the Takeuchi Regional Service Manager
for repairs to exceed $3000. Final approval of repairs will
be made by Takeuchi upon inspection of failed compo-
nents. This email authorization should be attached to the
warranty claim when submitted.
Parts: Takeuchi will reimburse servicing dealers for parts
approved, based on the price in eect on the date the
parts are replaced. Takeuchi will reimburse for approved
parts used for repair, at 110% of dealer cost. This cost
includes any discounts or programs taken to reduce the
part cost. All parts replaced under warranty, not recalled by
Takeuchi, must be retained by the dealership for 90 days
after payment has been received.
Labor: Takeuchi shall reimburse the dealer at 100% of the
dealer’s posted retail shop labor rate (for in-shop repairs)
on le with Takeuchi at the time the warranty claim is en-
tered. Shop labor rates may be adjusted once a year dur-
ing the second quarter. This retail shop labor rate shall be
subject to verication by Takeuchi from copies of actual
invoices to customers.
Outside Charges: Specialized repair, such as machine
shop, radiator, or air conditioning repair not normally per-
formed at some dealer locations, will be accepted as part
of the warranty claim at actual cost. To support the claim,
the dealer must explain the parts used and service work
performed in the failure description and probable cause
section of the warranty claim and submit a copy of the in-
voice.
Freight: The cost to return warranty recalled parts to
Takeuchi will be reimbursed. Freight expense reimburse-
ments are to be led on a separate claim for all heavy items
that have been recalled by the Warranty Department. The
dealer is responsible for attaching a copy of the freight in-
voice to the warranty claim for processing.
Travel: Takeuchi does not reimburse for travel time or
mileage. It is the customer’s responsibility to deliver a ma-
chine to an authorized service center for repairs.
FILING A WARRANTY CLAIM
In order to receive reimbursement for warranty work per-
1.6
1.5
519 Bonnie Valentine Way, Pendergrass, GA 30567 | 706.963.6300 | takeuchi-us.com
1.4
Warranty Terms and Conditions: Last revision 1/11/2019
Page: 2 of 3
1.3
1.7
1.8
1.9
formed, dealers and authorized Takeuchi service centers
should enter the claim information via the Takeuchi e-com-
merce website. All claims should be submitted to Takeuchi
no later than 30 days from the date of repair.
NOTE: Failure to submit warranty claims in a timely fash-
ion will result in non-payment of requested warranties.
Once the warranty claim is received by Takeuchi, a warran-
ty claim number will be assigned. Dealers should check
the Takeuchi e-commerce website to view the status on
warranty claims as well as to see which parts (if any) are
being recalled by Takeuchi. Any part recalled by Takeuchi
will be noted on the web warranty claim. Takeuchi will also
notify the dealer of the recall request. Recalled parts not
received by Takeuchi within 45 days from request date will
result in a DENIED warranty claim.
All recalled parts returning to Takeuchi must contain a copy
of the Return Merchandise Authorization (RMA) Form and
the return authorization number should be printed on the
outside of the box. Failure to enclose a copy of the RMA
form or indicating the RMA number on the outside of the
box will result in your parts being refused in the receiving
department, thus delaying the claim process.
EXTENDED WARRANTY
Takeuchi oers Power Protection Plans that are available
for purchase on all machines during the New Machine Lim-
ited Warranty period. These plans are for varying periods
of time and varying degrees of coverage, but are subject
to the same conditions as the original Takeuchi limited war-
ranty.
FEDERAL EMISSIONS WARRANTY
Takeuchi Manufacturing will warrant to the initial owner,
and each subsequent owner, the emission control system
on the non-road diesel engine installed in Takeuchi equip-
ment for the periods of time listed below.
• The emissions warranty period for all engines rated
at 19kW (25 HP) or below is 2 years or 2000 engine
hours, whichever occurs rst.
• The emissions warranty period for all engines rated
above 19kW (25 HP) or above is 5 years or 3000 en-
gine hours, whichever occurs rst.
Further detail regarding the Federal Emissions Warranty
can be found in Takeuchi’s Federal & California Emission
Control Systems warranty policy.
POWER PROTECTION PLAN TRANSFER
The Takeuchi Power Protection Plan is transferable on all
machines by lling out a transfer form and remitting the
warranty transfer fee of fty dollars ($50.00) to:
Takeuchi Mfg. U.S. Ltd.
Attn: Warranty Department
519 Bonnie Valentine Way
Pendergrass, GA 30567
MODIFICATION/SAFETY BULLETIN NOTIFICATION
Takeuchi strives to provide quality dependable equipment.
Problem areas sometimes require correction to main-
tain customer condence and loyalty. In such instances,
Takeuchi may deem it mandatory that such problems be
corrected on both customer machines and dealer invento-
ry units at the earliest possible time. Such action is referred
to as a eld modication.
Dealers will be advised of the exact procedures to be fol-
lowed and reimbursement rates are as follows:
• Modication and safety bulletin notications will be
emailed to the dealer’s specied e-mail address pro-
vided by each dealer.
• These bulletins will also be available online through
the e-commerce website.
• Parts necessary to complete the modication will
be made available either via automatic shipment by
Takeuchi to the dealer of record or the dealer will be
advised to order the required parts.
• All modications must be performed in an expeditious
manner, as time is of the essence.
• All warranty claims for modications must reference
the modication number on the warranty claim.
TAKEUCHI FLEET MANAGEMENT - TELEMATICS
Takeuchi MFG U.S. Ltd and its aliates collect, monitor and
use certain data from equipment that you have purchased.
This data referred to as “Machine Data” is collected, gener-
ated and/ or stored in the equipment you have purchased
from Takeuchi. Machine Data generally includes data re-
garding the operation of the equipment, such as measuring
multiple engine data points, fuel consumption, oil pressure
and other engine performance factors. Machine Data can
also include the collection, monitoring and use of data in-
volving how and where the equipment is being used.
Takeuchi collects and uses this Machine Data, among other
things, for purposes of providing customer support, market-
ing, product safety and other general business purposes.
The use of Machine Data will enable Takeuchi to better un-
derstand how its equipment is being used, which in turn will
allow it to research potential improvements and make its
products and services even more useful to its customers.
Takeuchi does not generally share Machine Data it col-
lects with other companies, except that Takeuchi may share
such information with its suppliers, customers who have
purchased such data for a monthly service fee, aliates,
dealerships, business partners and other companies that
are performing services for it. Finally, Takeuchi may disclose
Machine Data if required by law to do so.
The execution of this contract/bill of sale constitutes per-
mission for Takeuchi to collect, monitor, store and use the
Machine Data for the purposes set forth above.
Dealer:
Print Name:
Signature:
Title:
Date:
519 Bonnie Valentine Way, Pendergrass, GA 30567 | 706.963.6300 | takeuchi-us.com
Warranty Terms and Conditions: Last revision 1/11/2019
Page: 3 of 3
1.10
2.0
Table of contents
Other Takeuchi Excavator manuals
Takeuchi
Takeuchi TB260 User manual
Takeuchi
Takeuchi TB285 User manual
Takeuchi
Takeuchi TB175W Instruction manual
Takeuchi
Takeuchi TB215R User manual
Takeuchi
Takeuchi TB225 User manual
Takeuchi
Takeuchi TB1160W User manual
Takeuchi
Takeuchi TB1140 User manual
Takeuchi
Takeuchi TB215R Instruction manual
Takeuchi
Takeuchi TB175 User manual
Takeuchi
Takeuchi TB285 User manual
