Tala DWS-ECHO-TBL-01-US User manual

Thoughul lighting, responsibly designed in London.
Thank you for making the switch to Tala.
Discover the full Tala family at us.tala.co.uk
BEFORE STARTING
Please read instructions thoroughly before installation
and keep them for future reference. Please take extreme
care when dealing with electrical equipment.
IMPORTANT
Bulb must be installed in fixture before turning on.
WARNING
Ensure power is turned OFF before inserting plug.
CARE AND CLEANING
We recommend cleaning with a so dry cloth. Do not use
abrasive materials as these will damage the finish of
the product.
WARRANTY AND AFTERCARE
This product has a two-year warranty. If there appears
to be a functional defect with the product during this
time, please contact our team at customerservice@tala.
co.uk. Please note, the flexible cable attached to this
luminaire cannot be replaced; if the cable is damaged,
recycle the luminaire and seek a replacement.
SKU  DWSECHOTBL01US
Installation Guide
DAVID WEEKS FOR TALA
IP20 110-120V~
US
FOR INDOOR USE ONLY

Join the Community
Instagram: @tala | Facebook: talaHQ | Pinterest: TalaLED | Tag: lighttoliveby
Tala Studios, 25B Vyner Street, London E2 9DG | [e-mail]
Tala North America, Inc. 2 Research Place, Suite 300, Rockville, MD 20850
STEP 1
Insert your bulbs into the top
of the lamp, rotating clockwise
until tight. Take care not to
tighten too much to avoid
breakage.
STEP 2
Insert the lamp plug into your
chosen wall socket, making
sure the power is switched o.
STEP 3
Switch the power on and rotate
the dial on your dimmer until the
bulb lights up. Adjust the dimmer
for your desired light output.