Tala Echo User manual

Thoughtful lighting, responsibly designed in London.
Thank you for making the switch to Tala.
Discover the full Tala family at tala.co.uk
BEFORE STARTING
Please read instructions thoroughly before installation and keep them
for future reference. Please take extreme care when dealing with
electrical equipment.
IMPORTANT
Bulb must be installed in xture before turning on.
WARNING
Ensure power is turned OFF before inserting plug.
CARE AND CLEANING
We recommend cleaning with a soft dry cloth. Do not use abrasive
materials as these will damage the nish of the product.
WARRANTY AND AFTER-CARE
This product has a three-year warranty. If there appears to be a
functional defect with the product during this time, please contact our
team at [email protected]. The external exible cable or cord of
this luminaire cannot be replaced; if the cord is damaged, the luminaire
shall be destroyed.
INSTALLATION GUIDE
David Weeks for Tala
Echo Table Lamp
SKU - DWS-ECHO-TBL-01-US
US
IP20 110 - 120V

STEP 1
Insert your bulbs into the top of the lamp,
rotating clockwise until tight. Take care not to
tighten too much to avoid breakage.
STEP 2
Insert the lamp plug into your chosen wall
socket, making sure the power is switched
off.
STEP 3
Switch the power on and rotate the dial on
your dimmer until the bulb lights up. Adjust
the dimmer for your desired light output.
Join the Community
[email protected] | Instagram: @tala | Facebook: talaHQ | Pinterest: TalaLED | Tag: lighttoliveby
Tala North America, Inc. P.O. Box 89, 1051 Port Washington Blvd. Port Washington, NY 11050