Tala SKU - DWS-ENNO-TBL-01-US User manual

BEFORE STARTING
Please read instructions thoroughly before installation and keep them
for future reference. Please take extreme care when dealing with
electrical equipment.
IMPORTANT
Bulb must be installed in xture before turning on.
WARNING
Ensure power is turned OFF before inserting plug.
CARE AND CLEANING
We recommend cleaning with a soft dry cloth. Do not use abrasive
materials as these will damage the nish of the product.
WARRANTY AND AFTER-CARE
This product has a three-year warranty. If there appears to be a
functional defect with the product during this time, please contact our
team at [email protected]. The external exible cable or cord
of this luminaire cannot be replaced; if the cord is damaged, the luminaire
shall be destroyed.
SKU - DWS-NOMA-TBL-01-US
SKU - DWS-ENNO-TBL-01-US
SKU - DWS-OVAL-TBL-01-US
SKU - DWS-OBLO-TBL-01-US IP20 110 - 120V
US
Responsibly designed in Brooklyn, for people everywhere
Thank you for making the switch to Tala.
Discover the full Tala family at us.tala.co.uk
INSTALLATION GUIDE
David Weeks for Tala
Reflection Table Lamp

STEP 1
Insert your bulb into the top of the lamp,
rotating clockwise until tight. Take care not
to tighten too much to avoid breakage.
STEP 2
If necessary, carefully pivot the bulb within
the base to perfectly align the two halves.

STEP 4
Switch the power on and rotate the dial on
your dimmer until the bulb lights up. Adjust
the dimmer for your desired light output.
STEP 3
Insert the lamp plug into your chosen wall
socket, making sure the power is switched off.

Join the Community
[email protected] | Instagram: @tala | Facebook: talaHQ | Pinterest: TalaLED | Tag: lighttoliveby
Tala North America, Inc. P.O. Box 89, 1051 Port Washington Blvd. Port Washington, NY 11050
e Reflection range is the first in a trilogy of design collaborations
between Tala and the award-winning New York designer, David Weeks.
For more information on the collaboration, visit:
us.tala.co.uk/david-weeks-for-tala