Tala Reflection Noma User manual

Thoughul lighting, responsibly designed in London.
Thank you for making the switch to Tala.
Discover the full Tala family at us.tala.co.uk
BEFORE STARTING
Please read instructions thoroughly before installation and keep them
for future reference. Please take extreme care when dealing with
electrical equipment.
IMPORTANT
Bulb must be installed in fixture before turning on.
WARNING
Ensure power is turned OFF before inserting plug.
CARE AND CLEANING
We recommend cleaning with a so dry cloth. Do not use abrasive
materials as these will damage the finish of the product.
WARRANTY AND AFTERCARE
This product has a two-year warranty. If there appears to be a
functional defect with the product during this time, please contact
our team at customer[email protected].uk.
Please note, the flexible cable attached to this luminaire cannot be
replaced; if the cable is damaged, recycle the luminaire and seek a
replacement.
Installation Guide
DAVID WEEKS STUDIO
REFLECTION TABLE
SKU  DWSNOMATBL01US
SKU  DWSENNOTBL01US
SKU  DWSOVALTBL01US
SKU  DWSOBLOTBL01US
US
FOR INDOOR USE ONLY
IP20 220 - 240V~

STEP 1
Insert your bulb into the top of the lamp, rotating
clockwise until tight. Take care not to tighten too
much to avoid breakage.
If necessary, carefully pivot the bulb within the
base to peectly align the two halves.
STEP 2
Insert the lamp plug into your chosen wall
socket, making sure the power is switched o.
Switch the power on and rotate the dial on your
dimmer until the bulb lights up. Adjust the dimmer
for your desired light output.
Join the Community
Instagram: @tala | Facebook: talaHQ | Pinterest: TalaLED | Tag: lighttoliveby
Tala Studios, 25B Vyner Street, London E2 9DG | [e-mail]
Tala North America, Inc. 2 Research Place, Suite 300, Rockville, MD 20850