TAM SB 40 C B User manual

SG03206
INSTRUCTIONS FOR INSTALLATION AND
USE WARMING SALAD’BAR
SB 40 C B / SB 60 C B
Made in France
Avril 2015

2
WARMING SALAD‘BAR
SB 40 C B / SB 60 C B
Congratulations for the acquisition of this upmarket appliance made in France. You
chose an appliance which alloys the best technical qualities with a big user-
friendliness. We wish you the biggest contentment.
1. SECURITY INSTRUCTIONS
Please respect these instructions scrupulously to avoid any risk of fire,
electric shock, scald or other wounds and damage. During the use of this
appliance, fundamental circumspection of security must always be
noticed, such as :
- Take into account the instructions to be systematically kept with the
appliance.
- Install the appliance always in instructions respect. A 10 cm distance
minimum with the partition or the wall is necessary.
- Protect the appliance from direct light of the sun, frost and humidity.
- Never leave the appliance within the reach of children or disabled
persons without surveillance.
- The machine has to be used only by qualified person.
- Never move the appliance when it is working.
- Check that the appliance is definitely off before connecting it up or
disconnecting it.
- Do not touch the hot surfaces of the appliance. The temperature of the
hot surfaces can be very important when the appliance is working.
Always use handles and control knobs.
- Do not use the appliance for other functions than determined use.
- Do not leave the electrical cord in contact of hot surfaces.
- The appliance should not be used close to combustible materials.
- During use, look after not to obstruct hearings of aeration of the
appliance
- To avoid any electric shock, never plunge the cord or plug in water or
quite other liquid.
- If the cord is harmed, it must be replaced by the producer, its after sale
service or persons of similar skills to avoid any risk.
- Entrust repairs only to a skilled person.
- Use only spare parts of origin.
- Before cleaning the appliance, do not forget to disconnect it.

3
2. CONTENTS OF CARDBOARD PACKAGING
Device : A salad’bar
Accessories : A roof, two upright, two wires cover, two glasses, screws.
The present note
3. CONFORMITY OF USE
Use the salad’bar only to keep warm your hot starters, meat, vegetables,
readymade dishes…at a temperature between +20°C and +90°C during working
and service hours.
It enables you keeping warm products already cooked or hot.
4. WAY OF FUNCTIONING
These salad’bars exist in 2 versions : SB 40 C B, SB 60 C B.
They respectively keep 4 containers GN 1/1 and 6 containers GN 1/1 hot.
To turn on your salad’bar, press on the switch (n°1 on picture) : the green pilot light
(n°2 on picture) ignites. Turn on the thermostat control knob (n°3 on picture) on the
desired temperature.
Press on the upper switch (n°4 on picture) to turn on the light (n°5 and 6 on picture).
A valve under the tank enables to remove the water from the tank (n°7 on picture)
Once water is hot, you can place the GN containers.
6
1
3
2
4
7
5

4
5. FUNCTIONING / MANIPULATION
a) Installation / Assembly :
- Place the equipment on a stable and heatproof surface.
- Never place the device near a wall or near a partition makes of combustible
materials even if it is very well isolated.
- A distance of 10 cm from the partition or the wall is considered enough.
b) First starting :
Fill the container with water (about 5 cm above the heating elements) before
switching on the salad’bar.
Do not let it run without water : it could damage the heating elements and
irremediably bend the container.
To avoid quick evaporation, cover the whole tank with containers or lids.
First cleaning
Clean the device before the first use. (See 6 Cleaning)
Connection of the device
- Check that the tension and the frequency of the electricity network suit to the
values indicated on the descriptive plate.
- Check that neither the cord nor the plug are damaged
- Make sure that every control knob is positioned on 0.
- Unwind completely the electric power cable and connect it in a normalized plug
with the earth.
- The device is connected.
NB: in case of connection of the device in a plug without earth protection or directly
on the electricity network, confide its connection to a qualified person.
c) Use of device :
Elements of command and display
Command/Display Function
Thermostat (n°3 on picture) Temperature setting
Switch 0/I (n°4 on picture) Light on / Light off
Switch 0/I (n°1 on picture) On/off
Green pilot light (n°2 on picture) Machine on (pilot light on)
Machine off (pilot light off)

5
Starting
Press on the switch (n°1 on picture), the green pilot light (n°2 on picture)
ignites.
Turn on the thermostat (n°3 on picture) on the desired position.
Press on the switch (n°14 on picture) to turn on light.
Temperature setting
Set the temperature by positioning the thermostat (n°3 on picture) to the
desired temperature.
Stopping the appliance
Set each switch on 0: the appliance is no longer functioning.
Let the devise cool.
Disconnect the power cable.
Clean the appliance. (See 6. Cleaning)
d) Breakdown / repair :
In case of breakdown or of damaged part, please call your after-sales service and
confide any technical operation to qualified person.
When you contact the after-sales service of your distributor or your store, give him
the complete reference of your device (commercial name, type and serial number).
This information appears on the visible descriptive plate behind the device.
6. CLEANING AND MAINTENANCE
Disconnect the device
- Let cool completely the device before any technical intervention or cleaning.
- Clean regularly the metallic parts after each use by using only use non-abrasive
products, warm water and wash liquid: avoid the abrasive toweling. Rinse your
device with a wet sponge and dry it with a soft cloth.
- Never clean the device under a water jet, the infiltrations would risk to damage it in
an irreparable way.
- Never immerse the cord or the plug in the water or quite other liquid to avoid any
electric shock.
- Regularly change the water to avoid any scale deposit
- Never use abrasive product or vinegar; it could damage the container in
irremediable way.

6
7. TECHNICAL SPECIFICATIONS
Model SB 40 C B SB 60 C B
Dimensions 1442x953x1374 mm 2092x953x1374 mm
Weight 115 Kg 150 Kg
Temperature +20° à +90° C +20° à +90° C
Power 3000 W 3600 W
Nb heating
element 1 2
Current 12.5 A 15.5 A
Voltage 220-240 V ~ 220-240 V ~
Colours Wenge/Light oak/
Mahogany/Limed
white wood
Wenge/Light oak/
Mahogany/Limed
white wood
Wires colours correspondence :
Phase Brown or Black or Grey
Neutral Blue
Earth Yellow-Green
8. NORMS AND LEGALS DISPOSALS
The device is conform to :
IEC/EN 60335-1
IEC/EN 60335-2-49
EN 55014-1 + 55014-2
EN 61000-3-2 + 61000-3-3
9. ELIMINATION OF THE ELECTRIC AND ELECTRONIC WASTE
The device respects the directives :
2002/96/CE (DEEE)N°34270064800021
2002/95/CE (ROHS)
2066/95 CE
2004/108 CE

7
Reach rule
Never put the device among household waste.
The device must be put down in a center of recycling for the electric equipments.
The materials of the device are indeed reusable. By eliminating correctly the electric
and electronic wastes, the recycling and quite other shape of re-use of worn
equipments, you participate in a significant way in the environmental protection.
For any information about the collection of electric and electronic waste, please
contact your distributor.
10. GUARANTEE
Conditions of guarantee
The guarantee applicable to any device is the commercial guarantee of the
distributor or the retailer. Please contact the store where you bought your device to
know the precise conditions.
The guarantee grants no right for damages.
The dispositions which follow are not exclusive of the profit of the legal guarantee
planned by articles 1641 and following ones of the Civil code relative to the defects
and the latent defects.
Exclusion clauses of the guarantee
Bad installation and bad maintenance, in particular if they do not respect
current regulations or instructions appearing in this user guide.