
What does the designation “Di-II” (designed for exclusive use
on digital SLR cameras with smaller-size imagers) mean?
Designed to capture the optimum scope when used with a digital SLR camera
35mm Film
Digital SLR with smaller-size imager
Images taken with
a digital SLR with a
smaller-size imager are
actually cropped to
about 70% scope.
Since the size of 35mm fi lm format is
different from the image sensor of a
digital camera, scopes captured are
different even when focal lengths are
the same (i.e., angles of view differ).
The AF18-200mm Di-II is designed
to have shorter focal lengths to
achieve optimum angles of view in its
43.27mm
Same
Focal Length
28mm
image
sensor
27.9mm
The general image sensors
sm a ll e r-s ize ima ger s
However, the dimensions and
effective size differ depending
Focal Length
Mirror
Designed to fi t smaller-size imagers in order to reduce its diameter
Attempts to design shorter focal lengths inevitably result in a larger lens
diameter. Tamron has solved this problem by designing the size of the
lens’ image circle to match that of smaller-size image sensors. In the
compact design, it is almost comparable to a lens offering the same angles
of view in 35mm fi lm format.
*When pictures are taken with a Di-II lens mounted on a 35mm fi lm camera,
image corners become dark (ie., vignetting becomes noticeable).
General
Image sensor
Film and Digital – Angles of View
and Focal Lengths
*Digital = Digital cameras with
Telephoto
7˚59'
Stadard
31˚11'
Wide
75
˚
33
'
18mm
Equivalent
28mm
50mm
Equivalent
78mm
100mm
Equivalent
155mm
200mm
Equivalent
300mm
11mm
Equivalent
17mm
18mm
Will be available in 2005.
Categories of Tamron's Di
Digitally Integrated design
Exclusively for digital
NOTE:Vignetting occurs when pictures are taken with a Di-II lens mounted on a 35mm fi lm SLR camera or a digital
SLR camera with a image sensor larger than 24 x 16mm.
Designed for use with both 35mm fi lm SLR cameras and digital cameras.
Di lenses are designed to fi t the characteristics of digital cameras as well as fi lm cameras by paying attention to
countermeasures against ghosting and fl are through such advances as special coatings.
*The angles of view obtained by a “Di” lens mounted on a digital camera with smaller-size imagers differ from those
obtained by the same lens mounted on a 35mm format fi lm camera.
Please read the instruction manual carefully before using the lens.
Quality Assurance Activities:
At Tamron, quality management activities are performed in
compliance with ISO9001:2000 not only to assure product quality but to enhance customer
Environmental Protection:
We recognize the signifi cance of our social responsibilities. Tamron
promotes corporate activities that protect the earth's environment through the establishment of a
quality assurance system that is compliant with ISO14001.
17-11, 7-chome, Takinogawa, Kita-ku, Tokyo, Japan 114-0023 TEL 03-3916-0131 FAX 03-3916-1860
Designed for exclusive use on digital cameras with smaller-size imagers.
Di-II lenses are designed exclusively for digital SLRs with smaller-size imagers. This series of lenses are not
designed for 35mm format cameras and digital SLR cameras with image sensors larger than 24 x 16mm.
Different Angles of View
Wide-angle
Zoom
High Power
Zoom
Equivalent
28mm
10 Austin Boulevard Commack, NY 11725, U.S.A
Tel. (631) 858-8400 Fax. (631) 543-3963
Website http://www.tamron.com
Amplis Foto 22 Telson Rd. Markham, Ont, L3R 1E5
Tel. (905) 477-4111 Fax. (905) 477-2502
Website http://www.amplis.com